From: Stefano Brivio <sbrivio@redhat.com>
To: passt-dev@passt.top, David Gibson <david@gibson.dropbear.id.au>
Subject: [PATCH v2] conf: Bind inbound ports with CAP_NET_BIND_SERVICE before isolate_user()
Date: Fri, 14 Oct 2022 08:36:24 +0200 [thread overview]
Message-ID: <20221014063624.327051-1-sbrivio@redhat.com> (raw)
Even if CAP_NET_BIND_SERVICE is granted, we'll lose the capability in
the target user namespace as we isolate the process, which means
we're unable to bind to low ports at that point.
Bind inbound ports, and only those, before isolate_user(). Keep the
handling of outbound ports (for pasta mode only) after the setup of
the namespace, because that's where we'll bind them.
To this end, initialise the netlink socket for the init namespace
before isolate_user() as well, as we actually need to know the
addresses of the upstream interface before binding ports, in case
they're not explicitly passed by the user.
As we now call nl_sock_init() twice, checking its return code from
conf() twice looks a bit heavy: make it exit(), instead, as we
can't do much if we don't have netlink sockets.
While at it:
- move the v4_only && v6_only options check just after the first
option processing loop, as this is more strictly related to
option parsing proper
- update the man page, explaining that CAP_NET_BIND_SERVICE is
*not* the preferred way to bind ports, because passt and pasta
can be abused to allow other processes to make effective usage
of it. Add a note about the recommended sysctl instead
- simplify nl_sock_init_do() now that it's called once for each
case
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
---
v2: Simplify nl_sock_init_do(), add setcap for passt.avx2 in
man page (David Gibson)
conf.c | 71 +++++++++++++++++++++++++++----------------------------
netlink.c | 40 ++++++++++++++++---------------
netlink.h | 2 +-
passt.1 | 47 ++++++++++++++++++++++++++++++------
tap.c | 1 +
5 files changed, 98 insertions(+), 63 deletions(-)
diff --git a/conf.c b/conf.c
index a22ef48..e1f42f1 100644
--- a/conf.c
+++ b/conf.c
@@ -1530,6 +1530,11 @@ void conf(struct ctx *c, int argc, char **argv)
}
} while (name != -1);
+ if (v4_only && v6_only) {
+ err("Options ipv4-only and ipv6-only are mutually exclusive");
+ usage(argv[0]);
+ }
+
ret = conf_ugid(runas, &uid, &gid);
if (ret)
usage(argv[0]);
@@ -1539,6 +1544,30 @@ void conf(struct ctx *c, int argc, char **argv)
logfile, logsize);
}
+ nl_sock_init(c, false);
+ if (!v6_only)
+ c->ifi4 = conf_ip4(ifi, &c->ip4, c->mac);
+ if (!v4_only)
+ c->ifi6 = conf_ip6(ifi, &c->ip6, c->mac);
+ if (!c->ifi4 && !c->ifi6) {
+ err("External interface not usable");
+ exit(EXIT_FAILURE);
+ }
+
+ /* Inbound port options can be parsed now (after IPv4/IPv6 settings) */
+ optind = 1;
+ do {
+ struct port_fwd *fwd;
+
+ name = getopt_long(argc, argv, optstring, options, NULL);
+
+ if ((name == 't' && (fwd = &c->tcp.fwd_in)) ||
+ (name == 'u' && (fwd = &c->udp.fwd_in.f))) {
+ if (!optarg || conf_ports(c, name, optarg, fwd))
+ usage(argv[0]);
+ }
+ } while (name != -1);
+
if (c->mode == MODE_PASTA) {
if (conf_pasta_ns(&netns_only, userns, netns,
optind, argc, argv) < 0)
@@ -1561,50 +1590,20 @@ void conf(struct ctx *c, int argc, char **argv)
}
}
- if (nl_sock_init(c)) {
- err("Failed to get netlink socket");
- exit(EXIT_FAILURE);
- }
-
- if (v4_only && v6_only) {
- err("Options ipv4-only and ipv6-only are mutually exclusive");
- usage(argv[0]);
- }
- if (!v6_only)
- c->ifi4 = conf_ip4(ifi, &c->ip4, c->mac);
- if (!v4_only)
- c->ifi6 = conf_ip6(ifi, &c->ip6, c->mac);
- if (!c->ifi4 && !c->ifi6) {
- err("External interface not usable");
- exit(EXIT_FAILURE);
- }
+ if (c->mode == MODE_PASTA)
+ nl_sock_init(c, true);
- /* Now we can process port configuration options */
+ /* ...and outbound port options now that namespaces are set up. */
optind = 1;
do {
- struct port_fwd *fwd = NULL;
+ struct port_fwd *fwd;
name = getopt_long(argc, argv, optstring, options, NULL);
- switch (name) {
- case 't':
- case 'u':
- case 'T':
- case 'U':
- if (name == 't')
- fwd = &c->tcp.fwd_in;
- else if (name == 'T')
- fwd = &c->tcp.fwd_out;
- else if (name == 'u')
- fwd = &c->udp.fwd_in.f;
- else if (name == 'U')
- fwd = &c->udp.fwd_out.f;
+ if ((name == 'T' && (fwd = &c->tcp.fwd_out)) ||
+ (name == 'U' && (fwd = &c->udp.fwd_out.f))) {
if (!optarg || conf_ports(c, name, optarg, fwd))
usage(argv[0]);
-
- break;
- default:
- break;
}
} while (name != -1);
diff --git a/netlink.c b/netlink.c
index 6e5a96b..0850cbe 100644
--- a/netlink.c
+++ b/netlink.c
@@ -19,6 +19,7 @@
#include <sys/types.h>
#include <limits.h>
#include <stdlib.h>
+#include <stdbool.h>
#include <stdint.h>
#include <unistd.h>
#include <arpa/inet.h>
@@ -39,57 +40,58 @@ static int nl_sock_ns = -1;
static int nl_seq;
/**
- * nl_sock_init_do() - Set up netlink sockets in init and target namespace
- * @arg: Execution context
+ * nl_sock_init_do() - Set up netlink sockets in init or target namespace
+ * @arg: Execution context, if running from namespace, NULL otherwise
*
* Return: 0
*/
static int nl_sock_init_do(void *arg)
{
struct sockaddr_nl addr = { .nl_family = AF_NETLINK, };
- int *s = &nl_sock;
+ int *s = arg ? &nl_sock_ns : &nl_sock;
#ifdef NETLINK_GET_STRICT_CHK
int y = 1;
#endif
-ns:
+ if (arg)
+ ns_enter((struct ctx *)arg);
+
if (((*s) = socket(AF_NETLINK, SOCK_RAW, NETLINK_ROUTE)) < 0 ||
- bind(*s, (struct sockaddr *)&addr, sizeof(addr)))
+ bind(*s, (struct sockaddr *)&addr, sizeof(addr))) {
*s = -1;
-
- if (*s == -1 || !arg || s == &nl_sock_ns)
return 0;
+ }
#ifdef NETLINK_GET_STRICT_CHK
if (setsockopt(*s, SOL_NETLINK, NETLINK_GET_STRICT_CHK, &y, sizeof(y)))
debug("netlink: cannot set NETLINK_GET_STRICT_CHK on %i", *s);
#endif
-
- ns_enter((struct ctx *)arg);
- s = &nl_sock_ns;
- goto ns;
+ return 0;
}
/**
- * nl_sock_init() - Call nl_sock_init_do() and check for failures
+ * nl_sock_init() - Call nl_sock_init_do(), won't return on failure
* @c: Execution context
- *
- * Return: -EIO if sockets couldn't be set up, 0 otherwise
+ * @ns: Get socket in namespace, not in init
*/
-int nl_sock_init(const struct ctx *c)
+void nl_sock_init(const struct ctx *c, bool ns)
{
- if (c->mode == MODE_PASTA) {
+ if (ns) {
NS_CALL(nl_sock_init_do, c);
if (nl_sock_ns == -1)
- return -EIO;
+ goto fail;
} else {
nl_sock_init_do(NULL);
}
if (nl_sock == -1)
- return -EIO;
+ goto fail;
- return 0;
+ return;
+
+fail:
+ err("Failed to get netlink socket");
+ exit(EXIT_FAILURE);
}
/**
diff --git a/netlink.h b/netlink.h
index 5ce5037..3c991cc 100644
--- a/netlink.h
+++ b/netlink.h
@@ -6,7 +6,7 @@
#ifndef NETLINK_H
#define NETLINK_H
-int nl_sock_init(const struct ctx *c);
+void nl_sock_init(const struct ctx *c, bool ns);
unsigned int nl_get_ext_if(sa_family_t af);
void nl_route(int ns, unsigned int ifi, sa_family_t af, void *gw);
void nl_addr(int ns, unsigned int ifi, sa_family_t af,
diff --git a/passt.1 b/passt.1
index 7d113f2..4848087 100644
--- a/passt.1
+++ b/passt.1
@@ -771,14 +771,47 @@ possible to bind sockets to foreign addresses.
.SS Binding to low numbered ports (well-known or system ports, up to 1023)
-If the port forwarding configuration requires binding to port numbers lower than
-1024, \fBpasst\fR and \fBpasta\fR will try to bind to them, but will fail if not
-running as root, or without the \fICAP_NET_BIND_SERVICE\fR Linux capability, see
-\fBservices\fR(5) and \fBcapabilities\fR(7). To grant the
-\fICAP_NET_BIND_SERVICE\fR capability to passt, you can issue, as root:
+If the port forwarding configuration requires binding to ports with numbers
+lower than 1024, \fBpasst\fR and \fBpasta\fR will try to bind to them, but will
+fail, unless, either:
+
+.IP \(bu 2
+the \fIsys.net.ipv4.ip_unprivileged_port_start\fR sysctl is set to the number
+of the lowest port \fBpasst\fR and \fBpasta\fR need. For example, as root:
+
+.nf
+ sysctl -w net.ipv4.ip_unprivileged_port_start=443
+.fi
+
+\fBNote\fR: this is the recommended way of enabling \fBpasst\fR and \fBpasta\fR
+to bind to ports with numbers below 1024.
+
+.IP \(bu
+or the \fICAP_NET_BIND_SERVICE\fR Linux capability is granted, see
+\fBservices\fR(5) and \fBcapabilities\fR(7).
+
+This is, in general, \fBnot the recommended way\fR, because \fBpasst\fR and
+\fBpasta\fR might be used as vector to effectively use this capability from
+another process.
+
+However, if your environment is sufficiently controlled by an LSM (Linux
+Security Module) such as \fIAppArmor\fR, \fISELinux\fR, \fISmack\fR or
+\fITOMOYO\fR, and no other processes can interact in such a way in virtue of
+this, granting this capability to \fBpasst\fR and \fBpasta\fR only can
+effectively prevent other processes from utilising it.
+
+Note that this will not work for automatic detection and forwarding of ports
+with \fBpasta\fR, because \fBpasta\fR will relinquish this capability at
+runtime.
+
+To grant this capability, you can issue, as root:
+
+.nf
+ for p in $(which passt passt.avx2); do
+ setcap 'cap_net_bind_service=+ep' "${p}"
+ done
+.fi
-.RS
-setcap 'cap_net_bind_service=+ep' $(which passt)
.RE
.SS ICMP/ICMPv6 Echo sockets
diff --git a/tap.c b/tap.c
index 77e513c..8b6d9bc 100644
--- a/tap.c
+++ b/tap.c
@@ -30,6 +30,7 @@
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/uio.h>
+#include <stdbool.h>
#include <stdlib.h>
#include <unistd.h>
#include <netinet/ip.h>
--
@@ -30,6 +30,7 @@
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/uio.h>
+#include <stdbool.h>
#include <stdlib.h>
#include <unistd.h>
#include <netinet/ip.h>
--
2.35.1
next reply other threads:[~2022-10-14 6:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-14 6:36 Stefano Brivio [this message]
2022-10-17 4:26 ` [PATCH v2] conf: Bind inbound ports with CAP_NET_BIND_SERVICE before isolate_user() David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221014063624.327051-1-sbrivio@redhat.com \
--to=sbrivio@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=passt-dev@passt.top \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).