From: David Gibson <david@gibson.dropbear.id.au>
To: Stefano Brivio <sbrivio@redhat.com>, passt-dev@passt.top
Cc: David Gibson <david@gibson.dropbear.id.au>
Subject: [PATCH v3 09/16] udp: Don't explicitly track originating socket for spliced "connections"
Date: Fri, 25 Nov 2022 18:29:09 +1100 [thread overview]
Message-ID: <20221125072916.3060938-10-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20221125072916.3060938-1-david@gibson.dropbear.id.au>
When we look up udp_splice_to_ns[][].orig_sock in udp_sock_handler_splice()
we're finding the socket on which the originating packet for the
"connection" was received on. However, we don't specifically need this
socket to be the originating one - we just need one that's bound to the
the source port of this reply packet in the init namespace. We can look
this up in udp_splice_to_init[v6][src].target_sock, whose defining
characteristic is exactly that. The same applies with init and ns swapped.
In practice, of course, the port we locate this way will always be the
originating port, since we couldn't have started this "connection" if it
wasn't.
Change this, and we no longer need the @orig_sock field at all. That
leaves just @target_sock which we rename to simply @sock. The whole
udp_splice_flow structure now more represents a single bound port than
a "flow" per se, so rename and recomment it accordingly. Likewise the
udp_splice_to_{ns,init} names are now misleading, since the ports in
those maps are used in both directions. Rename them to
udp_splice_{ns,init} indicating the location where the described
socket is bound.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
udp.c | 113 +++++++++++++++++++++++++++-------------------------------
1 file changed, 52 insertions(+), 61 deletions(-)
diff --git a/udp.c b/udp.c
index 4954a7c..97453e7 100644
--- a/udp.c
+++ b/udp.c
@@ -41,50 +41,46 @@
* pair of recvmmsg() and sendmmsg() deals with this case.
*
* The connection tracking for PASTA mode is slightly complicated by the absence
- * of actual connections, see struct udp_splice_flow, and these examples:
+ * of actual connections, see struct udp_splice_port, and these examples:
*
* - from init to namespace:
*
* - forward direction: 127.0.0.1:5000 -> 127.0.0.1:80 in init from socket s,
* with epoll reference: index = 80, splice = 1, orig = 1, ns = 0
- * - if udp_splice_to_ns[V4][5000].target_sock:
- * - send packet to udp_splice_to_ns[V4][5000].target_sock, with
- * destination port 80
+ * - if udp_splice_ns[V4][5000].sock:
+ * - send packet to udp_splice_ns[V4][5000].sock, with destination port
+ * 80
* - otherwise:
- * - create new socket udp_splice_to_ns[V4][5000].target_sock
+ * - create new socket udp_splice_ns[V4][5000].sock
* - bind in namespace to 127.0.0.1:5000
* - add to epoll with reference: index = 5000, splice = 1, orig = 0,
* ns = 1
- * - set udp_splice_to_ns[V4][5000].orig_sock to s
- * - update udp_splice_to_ns[V4][5000].ts with current time
+ * - update udp_splice_ns[V4][5000].ts with current time
*
* - reverse direction: 127.0.0.1:80 -> 127.0.0.1:5000 in namespace socket s,
* having epoll reference: index = 5000, splice = 1, orig = 0, ns = 1
- * - if udp_splice_to_ns[V4][5000].orig_sock:
- * - send to udp_splice_to_ns[V4][5000].orig_sock, with destination port
- * 5000
+ * - if udp_splice_init[V4][80].sock:
+ * - send to udp_splice_init[V4][80].sock, with destination port 5000
* - otherwise, discard
*
* - from namespace to init:
*
* - forward direction: 127.0.0.1:2000 -> 127.0.0.1:22 in namespace from
* socket s, with epoll reference: index = 22, splice = 1, orig = 1, ns = 1
- * - if udp4_splice_to_init[V4][2000].target_sock:
- * - send packet to udp_splice_to_init[V4][2000].target_sock, with
- * destination port 22
+ * - if udp4_splice_init[V4][2000].sock:
+ * - send packet to udp_splice_init[V4][2000].sock, with destination
+ * port 22
* - otherwise:
- * - create new socket udp_splice_to_init[V4][2000].target_sock
+ * - create new socket udp_splice_init[V4][2000].sock
* - bind in init to 127.0.0.1:2000
* - add to epoll with reference: index = 2000, splice = 1, orig = 0,
* ns = 0
- * - set udp_splice_to_init[V4][2000].orig_sock to s
- * - update udp_splice_to_init[V4][2000].ts with current time
+ * - update udp_splice_init[V4][2000].ts with current time
*
* - reverse direction: 127.0.0.1:22 -> 127.0.0.1:2000 in init from socket s,
* having epoll reference: index = 2000, splice = 1, orig = 0, ns = 0
- * - if udp_splice_to_init[V4][2000].orig_sock:
- * - send to udp_splice_to_init[V4][2000].orig_sock, with destination port
- * 2000
+ * - if udp_splice_ns[V4][22].sock:
+ * - send to udp_splice_ns[V4][22].sock, with destination port 2000
* - otherwise, discard
*/
@@ -137,25 +133,21 @@ struct udp_tap_port {
};
/**
- * struct udp_splice_flow - Spliced "connection"
- * @orig_sock: Originating socket, bound to dest port in source ns of
- * originating datagram
- * @target_sock: Target socket, bound to source port of originating
- * datagram in dest ns
- * @ts: Activity timestamp
+ * struct udp_splice_port - Bound socket for spliced communication
+ * @sock: Socket bound to index port
+ * @ts: Activity timestamp
*/
-struct udp_splice_flow {
- int orig_sock;
- int target_sock;
+struct udp_splice_port {
+ int sock;
time_t ts;
};
/* Port tracking, arrays indexed by packet source port (host order) */
static struct udp_tap_port udp_tap_map [IP_VERSIONS][NUM_PORTS];
-/* Spliced "connections" indexed by bound port of target_sock (host order) */
-static struct udp_splice_flow udp_splice_to_ns [IP_VERSIONS][NUM_PORTS];
-static struct udp_splice_flow udp_splice_to_init[IP_VERSIONS][NUM_PORTS];
+/* "Spliced" sockets indexed by bound port (host order) */
+static struct udp_splice_port udp_splice_ns [IP_VERSIONS][NUM_PORTS];
+static struct udp_splice_port udp_splice_init[IP_VERSIONS][NUM_PORTS];
enum udp_act_type {
UDP_ACT_TAP,
@@ -397,7 +389,6 @@ static void udp_sock6_iov_init(void)
* udp_splice_new() - Create and prepare socket for "spliced" binding
* @c: Execution context
* @v6: Set for IPv6 sockets
- * @bound_sock: Originating bound socket
* @src: Source port of original connection, host order
* @splice: UDP_BACK_TO_INIT from init, UDP_BACK_TO_NS from namespace
*
@@ -405,22 +396,21 @@ static void udp_sock6_iov_init(void)
*
* #syscalls:pasta getsockname
*/
-int udp_splice_new(const struct ctx *c, int v6, int bound_sock, in_port_t src,
- bool ns)
+int udp_splice_new(const struct ctx *c, int v6, in_port_t src, bool ns)
{
struct epoll_event ev = { .events = EPOLLIN | EPOLLRDHUP | EPOLLHUP };
union epoll_ref ref = { .r.proto = IPPROTO_UDP,
.r.p.udp.udp = { .splice = true, .ns = ns,
.v6 = v6, .port = src }
};
- struct udp_splice_flow *flow;
+ struct udp_splice_port *sp;
int act, s;
if (ns) {
- flow = &udp_splice_to_ns[v6 ? V6 : V4][src];
+ sp = &udp_splice_ns[v6 ? V6 : V4][src];
act = UDP_ACT_SPLICE_NS;
} else {
- flow = &udp_splice_to_init[v6 ? V6 : V4][src];
+ sp = &udp_splice_init[v6 ? V6 : V4][src];
act = UDP_ACT_SPLICE_INIT;
}
@@ -455,8 +445,7 @@ int udp_splice_new(const struct ctx *c, int v6, int bound_sock, in_port_t src,
goto fail;
}
- flow->orig_sock = bound_sock;
- flow->target_sock = s;
+ sp->sock = s;
bitmap_set(udp_act[v6 ? V6 : V4][act], src);
ev.data.u64 = ref.u64;
@@ -472,7 +461,6 @@ fail:
* struct udp_splice_new_ns_arg - Arguments for udp_splice_new_ns()
* @c: Execution context
* @v6: Set for IPv6
- * @bound_sock: Originating bound socket
* @src: Source port of originating datagram, host order
* @dst: Destination port of originating datagram, host order
* @s: Newly created socket or negative error code
@@ -480,7 +468,6 @@ fail:
struct udp_splice_new_ns_arg {
const struct ctx *c;
int v6;
- int bound_sock;
in_port_t src;
int s;
};
@@ -500,7 +487,7 @@ static int udp_splice_new_ns(void *arg)
if (ns_enter(a->c))
return 0;
- a->s = udp_splice_new(a->c, a->v6, a->bound_sock, a->src, true);
+ a->s = udp_splice_new(a->c, a->v6, a->src, true);
return 0;
}
@@ -542,9 +529,9 @@ static void udp_sock_handler_splice(const struct ctx *c, union epoll_ref ref,
if (ref.r.p.udp.udp.orig && !ref.r.p.udp.udp.ns) {
src += c->udp.fwd_out.rdelta[src];
- if (!(s = udp_splice_to_ns[v6][src].target_sock)) {
+ if (!(s = udp_splice_ns[v6][src].sock)) {
struct udp_splice_new_ns_arg arg = {
- c, v6, ref.r.s, src, -1,
+ c, v6, src, -1,
};
NS_CALL(udp_splice_new_ns, &arg);
@@ -552,21 +539,25 @@ static void udp_sock_handler_splice(const struct ctx *c, union epoll_ref ref,
return;
}
- udp_splice_to_ns[v6][src].ts = now->tv_sec;
+ udp_splice_ns[v6][src].ts = now->tv_sec;
} else if (!ref.r.p.udp.udp.orig && ref.r.p.udp.udp.ns) {
- if (!(s = udp_splice_to_ns[v6][dst].orig_sock))
+ src += c->udp.fwd_in.rdelta[src];
+
+ if (!(s = udp_splice_init[v6][src].sock))
return;
} else if (ref.r.p.udp.udp.orig && ref.r.p.udp.udp.ns) {
src += c->udp.fwd_in.rdelta[src];
- if (!(s = udp_splice_to_init[v6][src].target_sock)) {
- s = udp_splice_new(c, v6, ref.r.s, src, false);
+ if (!(s = udp_splice_init[v6][src].sock)) {
+ s = udp_splice_new(c, v6, src, false);
if (s < 0)
return;
}
- udp_splice_to_init[v6][src].ts = now->tv_sec;
+ udp_splice_init[v6][src].ts = now->tv_sec;
} else if (!ref.r.p.udp.udp.orig && !ref.r.p.udp.udp.ns) {
- if (!(s = udp_splice_to_init[v6][dst].orig_sock))
+ src += c->udp.fwd_out.rdelta[src];
+
+ if (!(s = udp_splice_ns[v6][src].sock))
return;
} else {
return;
@@ -1097,7 +1088,7 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr,
ifname, port, uref.u32);
- udp_splice_to_init[V4][port].target_sock = s;
+ udp_splice_init[V4][port].sock = s;
}
} else {
uref.udp.splice = uref.udp.orig = uref.udp.ns = true;
@@ -1106,7 +1097,7 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr,
ifname, port, uref.u32);
- udp_splice_to_ns[V4][port].target_sock = s;
+ udp_splice_ns[V4][port].sock = s;
}
}
@@ -1131,7 +1122,7 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr,
ifname, port, uref.u32);
- udp_splice_to_init[V6][port].target_sock = s;
+ udp_splice_init[V6][port].sock = s;
}
} else {
bind_addr = &in6addr_loopback;
@@ -1139,7 +1130,7 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr,
ifname, port, uref.u32);
- udp_splice_to_ns[V6][port].target_sock = s;
+ udp_splice_ns[V6][port].sock = s;
}
}
}
@@ -1242,7 +1233,7 @@ int udp_init(struct ctx *c)
static void udp_timer_one(struct ctx *c, int v6, enum udp_act_type type,
in_port_t port, const struct timespec *ts)
{
- struct udp_splice_flow *flow;
+ struct udp_splice_port *sp;
struct udp_tap_port *tp;
int s = -1;
@@ -1257,17 +1248,17 @@ static void udp_timer_one(struct ctx *c, int v6, enum udp_act_type type,
break;
case UDP_ACT_SPLICE_INIT:
- flow = &udp_splice_to_init[v6 ? V6 : V4][port];
+ sp = &udp_splice_init[v6 ? V6 : V4][port];
- if (ts->tv_sec - flow->ts > UDP_CONN_TIMEOUT)
- s = flow->target_sock;
+ if (ts->tv_sec - sp->ts > UDP_CONN_TIMEOUT)
+ s = sp->sock;
break;
case UDP_ACT_SPLICE_NS:
- flow = &udp_splice_to_ns[v6 ? V6 : V4][port];
+ sp = &udp_splice_ns[v6 ? V6 : V4][port];
- if (ts->tv_sec - flow->ts > UDP_CONN_TIMEOUT)
- s = flow->target_sock;
+ if (ts->tv_sec - sp->ts > UDP_CONN_TIMEOUT)
+ s = sp->sock;
break;
default:
--
@@ -41,50 +41,46 @@
* pair of recvmmsg() and sendmmsg() deals with this case.
*
* The connection tracking for PASTA mode is slightly complicated by the absence
- * of actual connections, see struct udp_splice_flow, and these examples:
+ * of actual connections, see struct udp_splice_port, and these examples:
*
* - from init to namespace:
*
* - forward direction: 127.0.0.1:5000 -> 127.0.0.1:80 in init from socket s,
* with epoll reference: index = 80, splice = 1, orig = 1, ns = 0
- * - if udp_splice_to_ns[V4][5000].target_sock:
- * - send packet to udp_splice_to_ns[V4][5000].target_sock, with
- * destination port 80
+ * - if udp_splice_ns[V4][5000].sock:
+ * - send packet to udp_splice_ns[V4][5000].sock, with destination port
+ * 80
* - otherwise:
- * - create new socket udp_splice_to_ns[V4][5000].target_sock
+ * - create new socket udp_splice_ns[V4][5000].sock
* - bind in namespace to 127.0.0.1:5000
* - add to epoll with reference: index = 5000, splice = 1, orig = 0,
* ns = 1
- * - set udp_splice_to_ns[V4][5000].orig_sock to s
- * - update udp_splice_to_ns[V4][5000].ts with current time
+ * - update udp_splice_ns[V4][5000].ts with current time
*
* - reverse direction: 127.0.0.1:80 -> 127.0.0.1:5000 in namespace socket s,
* having epoll reference: index = 5000, splice = 1, orig = 0, ns = 1
- * - if udp_splice_to_ns[V4][5000].orig_sock:
- * - send to udp_splice_to_ns[V4][5000].orig_sock, with destination port
- * 5000
+ * - if udp_splice_init[V4][80].sock:
+ * - send to udp_splice_init[V4][80].sock, with destination port 5000
* - otherwise, discard
*
* - from namespace to init:
*
* - forward direction: 127.0.0.1:2000 -> 127.0.0.1:22 in namespace from
* socket s, with epoll reference: index = 22, splice = 1, orig = 1, ns = 1
- * - if udp4_splice_to_init[V4][2000].target_sock:
- * - send packet to udp_splice_to_init[V4][2000].target_sock, with
- * destination port 22
+ * - if udp4_splice_init[V4][2000].sock:
+ * - send packet to udp_splice_init[V4][2000].sock, with destination
+ * port 22
* - otherwise:
- * - create new socket udp_splice_to_init[V4][2000].target_sock
+ * - create new socket udp_splice_init[V4][2000].sock
* - bind in init to 127.0.0.1:2000
* - add to epoll with reference: index = 2000, splice = 1, orig = 0,
* ns = 0
- * - set udp_splice_to_init[V4][2000].orig_sock to s
- * - update udp_splice_to_init[V4][2000].ts with current time
+ * - update udp_splice_init[V4][2000].ts with current time
*
* - reverse direction: 127.0.0.1:22 -> 127.0.0.1:2000 in init from socket s,
* having epoll reference: index = 2000, splice = 1, orig = 0, ns = 0
- * - if udp_splice_to_init[V4][2000].orig_sock:
- * - send to udp_splice_to_init[V4][2000].orig_sock, with destination port
- * 2000
+ * - if udp_splice_ns[V4][22].sock:
+ * - send to udp_splice_ns[V4][22].sock, with destination port 2000
* - otherwise, discard
*/
@@ -137,25 +133,21 @@ struct udp_tap_port {
};
/**
- * struct udp_splice_flow - Spliced "connection"
- * @orig_sock: Originating socket, bound to dest port in source ns of
- * originating datagram
- * @target_sock: Target socket, bound to source port of originating
- * datagram in dest ns
- * @ts: Activity timestamp
+ * struct udp_splice_port - Bound socket for spliced communication
+ * @sock: Socket bound to index port
+ * @ts: Activity timestamp
*/
-struct udp_splice_flow {
- int orig_sock;
- int target_sock;
+struct udp_splice_port {
+ int sock;
time_t ts;
};
/* Port tracking, arrays indexed by packet source port (host order) */
static struct udp_tap_port udp_tap_map [IP_VERSIONS][NUM_PORTS];
-/* Spliced "connections" indexed by bound port of target_sock (host order) */
-static struct udp_splice_flow udp_splice_to_ns [IP_VERSIONS][NUM_PORTS];
-static struct udp_splice_flow udp_splice_to_init[IP_VERSIONS][NUM_PORTS];
+/* "Spliced" sockets indexed by bound port (host order) */
+static struct udp_splice_port udp_splice_ns [IP_VERSIONS][NUM_PORTS];
+static struct udp_splice_port udp_splice_init[IP_VERSIONS][NUM_PORTS];
enum udp_act_type {
UDP_ACT_TAP,
@@ -397,7 +389,6 @@ static void udp_sock6_iov_init(void)
* udp_splice_new() - Create and prepare socket for "spliced" binding
* @c: Execution context
* @v6: Set for IPv6 sockets
- * @bound_sock: Originating bound socket
* @src: Source port of original connection, host order
* @splice: UDP_BACK_TO_INIT from init, UDP_BACK_TO_NS from namespace
*
@@ -405,22 +396,21 @@ static void udp_sock6_iov_init(void)
*
* #syscalls:pasta getsockname
*/
-int udp_splice_new(const struct ctx *c, int v6, int bound_sock, in_port_t src,
- bool ns)
+int udp_splice_new(const struct ctx *c, int v6, in_port_t src, bool ns)
{
struct epoll_event ev = { .events = EPOLLIN | EPOLLRDHUP | EPOLLHUP };
union epoll_ref ref = { .r.proto = IPPROTO_UDP,
.r.p.udp.udp = { .splice = true, .ns = ns,
.v6 = v6, .port = src }
};
- struct udp_splice_flow *flow;
+ struct udp_splice_port *sp;
int act, s;
if (ns) {
- flow = &udp_splice_to_ns[v6 ? V6 : V4][src];
+ sp = &udp_splice_ns[v6 ? V6 : V4][src];
act = UDP_ACT_SPLICE_NS;
} else {
- flow = &udp_splice_to_init[v6 ? V6 : V4][src];
+ sp = &udp_splice_init[v6 ? V6 : V4][src];
act = UDP_ACT_SPLICE_INIT;
}
@@ -455,8 +445,7 @@ int udp_splice_new(const struct ctx *c, int v6, int bound_sock, in_port_t src,
goto fail;
}
- flow->orig_sock = bound_sock;
- flow->target_sock = s;
+ sp->sock = s;
bitmap_set(udp_act[v6 ? V6 : V4][act], src);
ev.data.u64 = ref.u64;
@@ -472,7 +461,6 @@ fail:
* struct udp_splice_new_ns_arg - Arguments for udp_splice_new_ns()
* @c: Execution context
* @v6: Set for IPv6
- * @bound_sock: Originating bound socket
* @src: Source port of originating datagram, host order
* @dst: Destination port of originating datagram, host order
* @s: Newly created socket or negative error code
@@ -480,7 +468,6 @@ fail:
struct udp_splice_new_ns_arg {
const struct ctx *c;
int v6;
- int bound_sock;
in_port_t src;
int s;
};
@@ -500,7 +487,7 @@ static int udp_splice_new_ns(void *arg)
if (ns_enter(a->c))
return 0;
- a->s = udp_splice_new(a->c, a->v6, a->bound_sock, a->src, true);
+ a->s = udp_splice_new(a->c, a->v6, a->src, true);
return 0;
}
@@ -542,9 +529,9 @@ static void udp_sock_handler_splice(const struct ctx *c, union epoll_ref ref,
if (ref.r.p.udp.udp.orig && !ref.r.p.udp.udp.ns) {
src += c->udp.fwd_out.rdelta[src];
- if (!(s = udp_splice_to_ns[v6][src].target_sock)) {
+ if (!(s = udp_splice_ns[v6][src].sock)) {
struct udp_splice_new_ns_arg arg = {
- c, v6, ref.r.s, src, -1,
+ c, v6, src, -1,
};
NS_CALL(udp_splice_new_ns, &arg);
@@ -552,21 +539,25 @@ static void udp_sock_handler_splice(const struct ctx *c, union epoll_ref ref,
return;
}
- udp_splice_to_ns[v6][src].ts = now->tv_sec;
+ udp_splice_ns[v6][src].ts = now->tv_sec;
} else if (!ref.r.p.udp.udp.orig && ref.r.p.udp.udp.ns) {
- if (!(s = udp_splice_to_ns[v6][dst].orig_sock))
+ src += c->udp.fwd_in.rdelta[src];
+
+ if (!(s = udp_splice_init[v6][src].sock))
return;
} else if (ref.r.p.udp.udp.orig && ref.r.p.udp.udp.ns) {
src += c->udp.fwd_in.rdelta[src];
- if (!(s = udp_splice_to_init[v6][src].target_sock)) {
- s = udp_splice_new(c, v6, ref.r.s, src, false);
+ if (!(s = udp_splice_init[v6][src].sock)) {
+ s = udp_splice_new(c, v6, src, false);
if (s < 0)
return;
}
- udp_splice_to_init[v6][src].ts = now->tv_sec;
+ udp_splice_init[v6][src].ts = now->tv_sec;
} else if (!ref.r.p.udp.udp.orig && !ref.r.p.udp.udp.ns) {
- if (!(s = udp_splice_to_init[v6][dst].orig_sock))
+ src += c->udp.fwd_out.rdelta[src];
+
+ if (!(s = udp_splice_ns[v6][src].sock))
return;
} else {
return;
@@ -1097,7 +1088,7 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr,
ifname, port, uref.u32);
- udp_splice_to_init[V4][port].target_sock = s;
+ udp_splice_init[V4][port].sock = s;
}
} else {
uref.udp.splice = uref.udp.orig = uref.udp.ns = true;
@@ -1106,7 +1097,7 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr,
ifname, port, uref.u32);
- udp_splice_to_ns[V4][port].target_sock = s;
+ udp_splice_ns[V4][port].sock = s;
}
}
@@ -1131,7 +1122,7 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr,
ifname, port, uref.u32);
- udp_splice_to_init[V6][port].target_sock = s;
+ udp_splice_init[V6][port].sock = s;
}
} else {
bind_addr = &in6addr_loopback;
@@ -1139,7 +1130,7 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr,
ifname, port, uref.u32);
- udp_splice_to_ns[V6][port].target_sock = s;
+ udp_splice_ns[V6][port].sock = s;
}
}
}
@@ -1242,7 +1233,7 @@ int udp_init(struct ctx *c)
static void udp_timer_one(struct ctx *c, int v6, enum udp_act_type type,
in_port_t port, const struct timespec *ts)
{
- struct udp_splice_flow *flow;
+ struct udp_splice_port *sp;
struct udp_tap_port *tp;
int s = -1;
@@ -1257,17 +1248,17 @@ static void udp_timer_one(struct ctx *c, int v6, enum udp_act_type type,
break;
case UDP_ACT_SPLICE_INIT:
- flow = &udp_splice_to_init[v6 ? V6 : V4][port];
+ sp = &udp_splice_init[v6 ? V6 : V4][port];
- if (ts->tv_sec - flow->ts > UDP_CONN_TIMEOUT)
- s = flow->target_sock;
+ if (ts->tv_sec - sp->ts > UDP_CONN_TIMEOUT)
+ s = sp->sock;
break;
case UDP_ACT_SPLICE_NS:
- flow = &udp_splice_to_ns[v6 ? V6 : V4][port];
+ sp = &udp_splice_ns[v6 ? V6 : V4][port];
- if (ts->tv_sec - flow->ts > UDP_CONN_TIMEOUT)
- s = flow->target_sock;
+ if (ts->tv_sec - sp->ts > UDP_CONN_TIMEOUT)
+ s = sp->sock;
break;
default:
--
2.38.1
next prev parent reply other threads:[~2022-11-25 7:29 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-25 7:29 [PATCH v3 00/16] Simplify and correct handling of "spliced" UDP forwarding David Gibson
2022-11-25 7:29 ` [PATCH v3 01/16] udp: Also bind() connected ports for "splice" forwarding David Gibson
2022-11-25 7:29 ` [PATCH v3 02/16] udp: Separate tracking of inbound and outbound packet flows David Gibson
2022-11-25 7:29 ` [PATCH v3 03/16] udp: Always use sendto() rather than send() for forwarding spliced packets David Gibson
2022-11-25 7:29 ` [PATCH v3 04/16] udp: Don't connect "forward" sockets for spliced flows David Gibson
2022-11-25 7:29 ` [PATCH v3 05/16] udp: Remove the @bound field from union udp_epoll_ref David Gibson
2022-11-25 7:29 ` [PATCH v3 06/16] udp: Split splice field in udp_epoll_ref into (mostly) independent bits David Gibson
2022-11-25 7:29 ` [PATCH v3 07/16] udp: Don't create double sockets for -U port David Gibson
2022-11-25 7:29 ` [PATCH v3 08/16] udp: Re-use fixed bound sockets for packet forwarding when possible David Gibson
2022-11-25 7:29 ` David Gibson [this message]
2022-11-25 7:29 ` [PATCH v3 10/16] udp: Update UDP "connection" timestamps in both directions David Gibson
2022-11-25 7:29 ` [PATCH v3 11/16] udp: Simplify udp_sock_handler_splice David Gibson
2022-11-25 7:29 ` [PATCH v3 12/16] udp: Make UDP_SPLICE_FRAMES and UDP_TAP_FRAMES_MEM the same thing David Gibson
2022-11-25 7:29 ` [PATCH v3 13/16] udp: Add helper to extract port from a sockaddr_in or sockaddr_in6 David Gibson
2022-11-25 7:29 ` [PATCH v3 14/16] udp: Unify buffers for tap and splice paths David Gibson
2022-11-25 7:29 ` [PATCH v3 15/16] udp: Split send half of udp_sock_handler_splice() from the receive half David Gibson
2022-11-25 7:29 ` [PATCH v3 16/16] udp: Correct splice forwarding when receiving from multiple sources David Gibson
2022-11-29 5:59 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221125072916.3060938-10-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=passt-dev@passt.top \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).