From: David Gibson <david@gibson.dropbear.id.au>
To: Stefano Brivio <sbrivio@redhat.com>, passt-dev@passt.top
Cc: David Gibson <david@gibson.dropbear.id.au>
Subject: [PATCH v2 18/18] tap: Improve handling of partial frame sends
Date: Fri, 9 Dec 2022 16:42:28 +1100 [thread overview]
Message-ID: <20221209054228.4085990-19-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20221209054228.4085990-1-david@gibson.dropbear.id.au>
In passt mode, when writing frames to the qemu socket, we might get a short
send. If we ignored this and carried on, the qemu socket would get out of
sync, because the bytes we actually sent wouldn't correspond to the length
header we already sent. tap_send_frames_passt() handles that by doing a
a blocking send to complete the message, but it has a few flaws:
* We only attempt to resend once: although it's unlikely in practice,
nothing prevents the blocking send() from also being short
* We print a debug error if send() returns non-zero.. but send() returns
the number of bytes sent, so we actually want it to return the length
of the remaining data.
Correct those flaws and also be a bit more thorough about reporting
problems here.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
tap.c | 51 ++++++++++++++++++++++++++++++++++++++-------------
1 file changed, 38 insertions(+), 13 deletions(-)
diff --git a/tap.c b/tap.c
index 5ec6b70..4fb27ca 100644
--- a/tap.c
+++ b/tap.c
@@ -326,13 +326,39 @@ static void tap_send_frames_pasta(struct ctx *c,
}
}
+/**
+ * tap_send_remainder() - Send remainder of a partiall sent frame
+ * @c: Execution context
+ * @iov: Partially sent buffer
+ * @offset: Number of bytes already sent from @iov
+ *
+ * #syscalls:passt sendto
+ */
+static void tap_send_remainder(const struct ctx *c, const struct iovec *iov,
+ size_t offset)
+{
+ const char *base = (char *)iov->iov_base;
+ size_t len = iov->iov_len;
+
+ while (offset < len) {
+ ssize_t sent = send(c->fd_tap, base + offset, len - offset,
+ MSG_NOSIGNAL);
+ if (sent < 0) {
+ err("tap: partial frame send (missing %lu bytes): %s",
+ len - offset, strerror(errno));
+ return;
+ }
+ offset += sent;
+ }
+}
+
/**
* tap_send_frames_passt() - Send multiple frames to the passt tap
* @c: Execution context
* @iov: Array of buffers, each containing one frame
* @n: Number of buffers/frames in @iov
*
- * #syscalls:passt sendmsg send
+ * #syscalls:passt sendmsg
*/
static void tap_send_frames_passt(const struct ctx *c,
const struct iovec *iov, size_t n)
@@ -341,29 +367,28 @@ static void tap_send_frames_passt(const struct ctx *c,
.msg_iov = (void *)iov,
.msg_iovlen = n,
};
- size_t end = 0, missing;
unsigned int i;
ssize_t sent;
- char *p;
sent = sendmsg(c->fd_tap, &mh, MSG_NOSIGNAL | MSG_DONTWAIT);
if (sent < 0)
return;
- /* Ensure a complete last message on partial sendmsg() */
- for (i = 0; i < n; i++, iov++) {
- end += iov->iov_len;
- if (end >= (size_t)sent)
+ /* Check for any partial frames due to short send */
+ for (i = 0; i < n; i++) {
+ if ((size_t)sent < iov[i].iov_len)
break;
+ sent -= iov[i].iov_len;
}
- missing = end - sent;
- if (!missing)
- return;
+ if (i < n && sent) {
+ /* A partial frame was sent */
+ tap_send_remainder(c, &iov[i], sent);
+ i++;
+ }
- p = (char *)iov->iov_base + iov->iov_len - missing;
- if (send(c->fd_tap, p, missing, MSG_NOSIGNAL))
- debug("tap: failed to flush %lu missing bytes to tap", missing);
+ if (i < n)
+ debug("tap: dropped %lu frames due to short send", n - i);
}
/**
--
@@ -326,13 +326,39 @@ static void tap_send_frames_pasta(struct ctx *c,
}
}
+/**
+ * tap_send_remainder() - Send remainder of a partiall sent frame
+ * @c: Execution context
+ * @iov: Partially sent buffer
+ * @offset: Number of bytes already sent from @iov
+ *
+ * #syscalls:passt sendto
+ */
+static void tap_send_remainder(const struct ctx *c, const struct iovec *iov,
+ size_t offset)
+{
+ const char *base = (char *)iov->iov_base;
+ size_t len = iov->iov_len;
+
+ while (offset < len) {
+ ssize_t sent = send(c->fd_tap, base + offset, len - offset,
+ MSG_NOSIGNAL);
+ if (sent < 0) {
+ err("tap: partial frame send (missing %lu bytes): %s",
+ len - offset, strerror(errno));
+ return;
+ }
+ offset += sent;
+ }
+}
+
/**
* tap_send_frames_passt() - Send multiple frames to the passt tap
* @c: Execution context
* @iov: Array of buffers, each containing one frame
* @n: Number of buffers/frames in @iov
*
- * #syscalls:passt sendmsg send
+ * #syscalls:passt sendmsg
*/
static void tap_send_frames_passt(const struct ctx *c,
const struct iovec *iov, size_t n)
@@ -341,29 +367,28 @@ static void tap_send_frames_passt(const struct ctx *c,
.msg_iov = (void *)iov,
.msg_iovlen = n,
};
- size_t end = 0, missing;
unsigned int i;
ssize_t sent;
- char *p;
sent = sendmsg(c->fd_tap, &mh, MSG_NOSIGNAL | MSG_DONTWAIT);
if (sent < 0)
return;
- /* Ensure a complete last message on partial sendmsg() */
- for (i = 0; i < n; i++, iov++) {
- end += iov->iov_len;
- if (end >= (size_t)sent)
+ /* Check for any partial frames due to short send */
+ for (i = 0; i < n; i++) {
+ if ((size_t)sent < iov[i].iov_len)
break;
+ sent -= iov[i].iov_len;
}
- missing = end - sent;
- if (!missing)
- return;
+ if (i < n && sent) {
+ /* A partial frame was sent */
+ tap_send_remainder(c, &iov[i], sent);
+ i++;
+ }
- p = (char *)iov->iov_base + iov->iov_len - missing;
- if (send(c->fd_tap, p, missing, MSG_NOSIGNAL))
- debug("tap: failed to flush %lu missing bytes to tap", missing);
+ if (i < n)
+ debug("tap: dropped %lu frames due to short send", n - i);
}
/**
--
2.38.1
next prev parent reply other threads:[~2022-12-09 5:42 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-09 5:42 [PATCH v2 00/18] RFC: Unify and simplify tap send path David Gibson
2022-12-09 5:42 ` [PATCH v2 01/18] pcap: Introduce pcap_frame() helper David Gibson
2023-01-04 17:45 ` Stefano Brivio
2023-01-05 4:47 ` David Gibson
2022-12-09 5:42 ` [PATCH v2 02/18] pcap: Replace pcapm() with pcap_multiple() David Gibson
2022-12-09 5:42 ` [PATCH v2 03/18] tcp: Combine two parts of passt tap send path together David Gibson
2022-12-09 5:42 ` [PATCH v2 04/18] tcp: Don't keep compute total bytes in a message until we need it David Gibson
2023-01-04 17:45 ` Stefano Brivio
2023-01-05 4:48 ` David Gibson
2022-12-09 5:42 ` [PATCH v2 05/18] tcp: Improve interface to tcp_l2_buf_flush() David Gibson
2023-01-04 17:45 ` Stefano Brivio
2023-01-05 4:53 ` David Gibson
2022-12-09 5:42 ` [PATCH v2 06/18] tcp: Combine two parts of pasta tap send path together David Gibson
2022-12-09 5:42 ` [PATCH v2 07/18] tap, tcp: Move tap send path to tap.c David Gibson
2022-12-09 5:42 ` [PATCH v2 08/18] util: Introduce hton*_constant() in place of #ifdefs David Gibson
2022-12-09 5:42 ` [PATCH v2 09/18] tcp, udp: Use named field initializers in iov_init functions David Gibson
2022-12-09 5:42 ` [PATCH v2 10/18] util: Parameterize ethernet header initializer macro David Gibson
2022-12-09 5:42 ` [PATCH v2 11/18] tcp: Remove redundant and incorrect initialization from *_iov_init() David Gibson
2022-12-09 5:42 ` [PATCH v2 12/18] tcp: Consolidate calculation of total frame size David Gibson
2022-12-09 5:42 ` [PATCH v2 13/18] tap: Add "tap headers" abstraction David Gibson
2022-12-09 5:42 ` [PATCH v2 14/18] tcp: Use abstracted tap header David Gibson
2022-12-09 5:42 ` [PATCH v2 15/18] tap: Use different io vector bases depending on tap type David Gibson
2022-12-09 5:42 ` [PATCH v2 16/18] udp: Use abstracted tap header David Gibson
2022-12-09 5:42 ` [PATCH v2 17/18] udp: Use tap_send_frames() David Gibson
2023-01-04 17:45 ` Stefano Brivio
2023-01-05 4:54 ` David Gibson
2022-12-09 5:42 ` David Gibson [this message]
2023-01-04 17:45 ` [PATCH v2 18/18] tap: Improve handling of partial frame sends Stefano Brivio
2023-01-05 4:57 ` David Gibson
2023-01-04 17:45 ` [PATCH v2 00/18] RFC: Unify and simplify tap send path Stefano Brivio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221209054228.4085990-19-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=passt-dev@passt.top \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).