From: David Gibson <david@gibson.dropbear.id.au>
To: passt-dev@passt.top, Stefano Brivio <sbrivio@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Subject: [PATCH v2 8/8] udp: Don't use separate sockets to listen for spliced packets
Date: Thu, 15 Dec 2022 12:30:18 +1100 [thread overview]
Message-ID: <20221215013018.1556807-9-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20221215013018.1556807-1-david@gibson.dropbear.id.au>
Currently, when ports are forwarded inbound in pasta mode, we open two
sockets for incoming traffic: one listens on the public IP address and will
forward packets to the tuntap interface. The other listens on localhost
and forwards via "splicing" (resending directly via sockets in the ns).
Now that we've improved the logic about whether we "splice" any individual
packet, we don't need this. Instead we can have a single socket bound to
0.0.0.0 or ::, marked as able to splice and udp_sock_handler() will deal
with each packet as appropriate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
udp.c | 53 +++++++++++++----------------------------------------
1 file changed, 13 insertions(+), 40 deletions(-)
diff --git a/udp.c b/udp.c
index 8ba3453..228a086 100644
--- a/udp.c
+++ b/udp.c
@@ -1116,7 +1116,6 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
const void *addr, const char *ifname, in_port_t port)
{
union udp_epoll_ref uref = { .u32 = 0 };
- const void *bind_addr;
int s;
if (ns) {
@@ -1128,67 +1127,41 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
}
if ((af == AF_INET || af == AF_UNSPEC) && c->ifi4) {
- if (!addr && c->mode == MODE_PASTA)
- bind_addr = &c->ip4.addr;
- else
- bind_addr = addr;
-
uref.udp.v6 = 0;
+ uref.udp.splice = (c->mode == MODE_PASTA);
+ uref.udp.orig = true;
if (!ns) {
- uref.udp.splice = 0;
- s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr, ifname,
+ s = sock_l4(c, AF_INET, IPPROTO_UDP, addr, ifname,
port, uref.u32);
udp_tap_map[V4][uref.udp.port].sock = s;
-
- if (c->mode == MODE_PASTA) {
- bind_addr = &(uint32_t){ htonl(INADDR_LOOPBACK) };
- uref.udp.splice = uref.udp.orig = true;
-
- s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr,
- ifname, port, uref.u32);
- udp_splice_init[V4][port].sock = s;
- }
+ udp_splice_init[V4][port].sock = s;
} else {
- uref.udp.splice = uref.udp.orig = uref.udp.ns = true;
-
- bind_addr = &(uint32_t){ htonl(INADDR_LOOPBACK) };
+ struct in_addr loopback = { htonl(INADDR_LOOPBACK) };
+ uref.udp.ns = true;
- s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr,
+ s = sock_l4(c, AF_INET, IPPROTO_UDP, &loopback,
ifname, port, uref.u32);
udp_splice_ns[V4][port].sock = s;
}
}
if ((af == AF_INET6 || af == AF_UNSPEC) && c->ifi6) {
- if (!addr && c->mode == MODE_PASTA)
- bind_addr = &c->ip6.addr;
- else
- bind_addr = addr;
-
uref.udp.v6 = 1;
+ uref.udp.splice = (c->mode == MODE_PASTA);
+ uref.udp.orig = true;
if (!ns) {
- uref.udp.splice = 0;
- s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr, ifname,
+ s = sock_l4(c, AF_INET6, IPPROTO_UDP, addr, ifname,
port, uref.u32);
udp_tap_map[V6][uref.udp.port].sock = s;
-
- if (c->mode == MODE_PASTA) {
- bind_addr = &in6addr_loopback;
- uref.udp.splice = uref.udp.orig = true;
-
- s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr,
- ifname, port, uref.u32);
- udp_splice_init[V6][port].sock = s;
- }
+ udp_splice_init[V6][port].sock = s;
} else {
- bind_addr = &in6addr_loopback;
- uref.udp.splice = uref.udp.orig = uref.udp.ns = true;
+ uref.udp.ns = true;
- s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr,
+ s = sock_l4(c, AF_INET6, IPPROTO_UDP, &in6addr_loopback,
ifname, port, uref.u32);
udp_splice_ns[V6][port].sock = s;
}
--
@@ -1116,7 +1116,6 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
const void *addr, const char *ifname, in_port_t port)
{
union udp_epoll_ref uref = { .u32 = 0 };
- const void *bind_addr;
int s;
if (ns) {
@@ -1128,67 +1127,41 @@ void udp_sock_init(const struct ctx *c, int ns, sa_family_t af,
}
if ((af == AF_INET || af == AF_UNSPEC) && c->ifi4) {
- if (!addr && c->mode == MODE_PASTA)
- bind_addr = &c->ip4.addr;
- else
- bind_addr = addr;
-
uref.udp.v6 = 0;
+ uref.udp.splice = (c->mode == MODE_PASTA);
+ uref.udp.orig = true;
if (!ns) {
- uref.udp.splice = 0;
- s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr, ifname,
+ s = sock_l4(c, AF_INET, IPPROTO_UDP, addr, ifname,
port, uref.u32);
udp_tap_map[V4][uref.udp.port].sock = s;
-
- if (c->mode == MODE_PASTA) {
- bind_addr = &(uint32_t){ htonl(INADDR_LOOPBACK) };
- uref.udp.splice = uref.udp.orig = true;
-
- s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr,
- ifname, port, uref.u32);
- udp_splice_init[V4][port].sock = s;
- }
+ udp_splice_init[V4][port].sock = s;
} else {
- uref.udp.splice = uref.udp.orig = uref.udp.ns = true;
-
- bind_addr = &(uint32_t){ htonl(INADDR_LOOPBACK) };
+ struct in_addr loopback = { htonl(INADDR_LOOPBACK) };
+ uref.udp.ns = true;
- s = sock_l4(c, AF_INET, IPPROTO_UDP, bind_addr,
+ s = sock_l4(c, AF_INET, IPPROTO_UDP, &loopback,
ifname, port, uref.u32);
udp_splice_ns[V4][port].sock = s;
}
}
if ((af == AF_INET6 || af == AF_UNSPEC) && c->ifi6) {
- if (!addr && c->mode == MODE_PASTA)
- bind_addr = &c->ip6.addr;
- else
- bind_addr = addr;
-
uref.udp.v6 = 1;
+ uref.udp.splice = (c->mode == MODE_PASTA);
+ uref.udp.orig = true;
if (!ns) {
- uref.udp.splice = 0;
- s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr, ifname,
+ s = sock_l4(c, AF_INET6, IPPROTO_UDP, addr, ifname,
port, uref.u32);
udp_tap_map[V6][uref.udp.port].sock = s;
-
- if (c->mode == MODE_PASTA) {
- bind_addr = &in6addr_loopback;
- uref.udp.splice = uref.udp.orig = true;
-
- s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr,
- ifname, port, uref.u32);
- udp_splice_init[V6][port].sock = s;
- }
+ udp_splice_init[V6][port].sock = s;
} else {
- bind_addr = &in6addr_loopback;
- uref.udp.splice = uref.udp.orig = uref.udp.ns = true;
+ uref.udp.ns = true;
- s = sock_l4(c, AF_INET6, IPPROTO_UDP, bind_addr,
+ s = sock_l4(c, AF_INET6, IPPROTO_UDP, &in6addr_loopback,
ifname, port, uref.u32);
udp_splice_ns[V6][port].sock = s;
}
--
2.38.1
next prev parent reply other threads:[~2022-12-15 1:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-15 1:30 [PATCH v2 0/8] Don't use additional sockets for receiving "spliced" UDP communications David Gibson
2022-12-15 1:30 ` [PATCH v2 1/8] udp: Move sending pasta tap frames to the end of udp_sock_handler() David Gibson
2022-12-15 1:30 ` [PATCH v2 2/8] udp: Split sending to passt tap interface into separate function David Gibson
2022-12-15 1:30 ` [PATCH v2 3/8] udp: Split receive from preparation and send in udp_sock_handler() David Gibson
2022-12-15 1:30 ` [PATCH v2 4/8] udp: Receive multiple datagrams at once on the pasta sock->tap path David Gibson
2022-12-15 1:30 ` [PATCH v2 5/8] udp: Pre-populate msg_names with local address David Gibson
2022-12-15 1:30 ` [PATCH v2 6/8] udp: Unify udp_sock_handler_splice() with udp_sock_handler() David Gibson
2022-12-15 1:30 ` [PATCH v2 7/8] udp: Decide whether to "splice" per datagram rather than per socket David Gibson
2022-12-15 1:30 ` David Gibson [this message]
2022-12-16 0:58 ` [PATCH v2 0/8] Don't use additional sockets for receiving "spliced" UDP communications Stefano Brivio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221215013018.1556807-9-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=passt-dev@passt.top \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).