From: David Gibson <david@gibson.dropbear.id.au>
To: passt-dev@passt.top, Stefano Brivio <sbrivio@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Subject: [PATCH v2 17/17] netlink: Propagate errors for "dup" operations
Date: Thu, 3 Aug 2023 17:19:56 +1000 [thread overview]
Message-ID: <20230803071956.3198452-18-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20230803071956.3198452-1-david@gibson.dropbear.id.au>
We now detect errors on netlink "set" operations while configuring the
pasta namespace with --config-net. However in many cases rather than
a simple "set" we use a more complex "dup" function to copy
configuration from the host to the namespace. We're not yet properly
detecting and reporting netlink errors for that case.
Change the "dup" operations to propagate netlink errors to their
caller, pasta_ns_conf() and report them there.
Link: https://bugs.passt.top/show_bug.cgi?id=60
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
netlink.c | 40 ++++++++++++++++++++++++++++------------
netlink.h | 8 ++++----
pasta.c | 15 ++++++++-------
3 files changed, 40 insertions(+), 23 deletions(-)
diff --git a/netlink.c b/netlink.c
index 051d46c..1226379 100644
--- a/netlink.c
+++ b/netlink.c
@@ -413,9 +413,11 @@ int nl_route_set_def(int s, unsigned int ifi, sa_family_t af, void *gw)
* @s_dst: Netlink socket in destination namespace
* @ifi_dst: Interface index in destination namespace
* @af: Address family
+ *
+ * Return: 0 on success, negative error code on failure
*/
-void nl_route_dup(int s_src, unsigned int ifi_src,
- int s_dst, unsigned int ifi_dst, sa_family_t af)
+int nl_route_dup(int s_src, unsigned int ifi_src,
+ int s_dst, unsigned int ifi_dst, sa_family_t af)
{
struct req_t {
struct nlmsghdr nlh;
@@ -477,9 +479,11 @@ void nl_route_dup(int s_src, unsigned int ifi_src,
if (extra) {
err("netlink: Too many routes to duplicate");
- return;
+ return -E2BIG;
}
}
+ if (status < 0)
+ return status;
/* Routes might have dependencies between each other, and the kernel
* processes RTM_NEWROUTE messages sequentially. For n routes, we might
@@ -493,15 +497,20 @@ void nl_route_dup(int s_src, unsigned int ifi_src,
NLMSG_OK(nh, status);
nh = NLMSG_NEXT(nh, status)) {
uint16_t flags = nh->nlmsg_flags;
+ int rc;
if (nh->nlmsg_type != RTM_NEWROUTE)
continue;
- nl_do(s_dst, nh, RTM_NEWROUTE,
- (flags & ~NLM_F_DUMP_FILTERED) | NLM_F_CREATE,
- nh->nlmsg_len);
+ rc = nl_do(s_dst, nh, RTM_NEWROUTE,
+ (flags & ~NLM_F_DUMP_FILTERED) | NLM_F_CREATE,
+ nh->nlmsg_len);
+ if (rc < 0 && rc != -ENETUNREACH && rc != -EEXIST)
+ return rc;
}
}
+
+ return 0;
}
/**
@@ -634,9 +643,11 @@ int nl_addr_set(int s, unsigned int ifi, sa_family_t af,
* @s_dst: Netlink socket in destination network namespace
* @ifi_dst: Interface index in destination namespace
* @af: Address family
+ *
+ * Return: 0 on success, negative error code on failure
*/
-void nl_addr_dup(int s_src, unsigned int ifi_src,
- int s_dst, unsigned int ifi_dst, sa_family_t af)
+int nl_addr_dup(int s_src, unsigned int ifi_src,
+ int s_dst, unsigned int ifi_dst, sa_family_t af)
{
struct req_t {
struct nlmsghdr nlh;
@@ -650,6 +661,7 @@ void nl_addr_dup(int s_src, unsigned int ifi_src,
struct nlmsghdr *nh;
ssize_t status;
uint16_t seq;
+ int rc = 0;
seq = nl_send(s_src, &req, RTM_GETADDR, NLM_F_DUMP, sizeof(req));
nl_foreach_oftype(nh, status, s_src, buf, seq, RTM_NEWADDR) {
@@ -662,7 +674,7 @@ void nl_addr_dup(int s_src, unsigned int ifi_src,
ifa = (struct ifaddrmsg *)NLMSG_DATA(nh);
- if (ifa->ifa_scope == RT_SCOPE_LINK ||
+ if (rc < 0 || ifa->ifa_scope == RT_SCOPE_LINK ||
ifa->ifa_index != ifi_src)
continue;
@@ -674,10 +686,14 @@ void nl_addr_dup(int s_src, unsigned int ifi_src,
rta->rta_type = IFA_UNSPEC;
}
- nl_do(s_dst, nh, RTM_NEWADDR,
- (nh->nlmsg_flags & ~NLM_F_DUMP_FILTERED) | NLM_F_CREATE,
- nh->nlmsg_len);
+ rc = nl_do(s_dst, nh, RTM_NEWADDR,
+ (nh->nlmsg_flags & ~NLM_F_DUMP_FILTERED) | NLM_F_CREATE,
+ nh->nlmsg_len);
}
+ if (status < 0)
+ return status;
+
+ return rc;
}
/**
diff --git a/netlink.h b/netlink.h
index b831405..9f4f8f4 100644
--- a/netlink.h
+++ b/netlink.h
@@ -13,14 +13,14 @@ void nl_sock_init(const struct ctx *c, bool ns);
unsigned int nl_get_ext_if(int s, sa_family_t af);
int nl_route_get_def(int s, unsigned int ifi, sa_family_t af, void *gw);
int nl_route_set_def(int s, unsigned int ifi, sa_family_t af, void *gw);
-void nl_route_dup(int s_src, unsigned int ifi_src,
- int s_dst, unsigned int ifi_dst, sa_family_t af);
+int nl_route_dup(int s_src, unsigned int ifi_src,
+ int s_dst, unsigned int ifi_dst, sa_family_t af);
int nl_addr_get(int s, unsigned int ifi, sa_family_t af,
void *addr, int *prefix_len, void *addr_l);
int nl_addr_set(int s, unsigned int ifi, sa_family_t af,
void *addr, int prefix_len);
-void nl_addr_dup(int s_src, unsigned int ifi_src,
- int s_dst, unsigned int ifi_dst, sa_family_t af);
+int nl_addr_dup(int s_src, unsigned int ifi_src,
+ int s_dst, unsigned int ifi_dst, sa_family_t af);
int nl_link_get_mac(int s, unsigned int ifi, void *mac);
int nl_link_set_mac(int s, unsigned int ifi, void *mac);
int nl_link_up(int s, unsigned int ifi, int mtu);
diff --git a/pasta.c b/pasta.c
index 54c2afa..07833fd 100644
--- a/pasta.c
+++ b/pasta.c
@@ -298,8 +298,9 @@ void pasta_ns_conf(struct ctx *c)
&c->ip4.addr,
c->ip4.prefix_len);
else
- nl_addr_dup(nl_sock, c->ifi4,
- nl_sock_ns, c->pasta_ifi, AF_INET);
+ rc = nl_addr_dup(nl_sock, c->ifi4,
+ nl_sock_ns, c->pasta_ifi,
+ AF_INET);
if (rc < 0)
die("Couldn't set IPv4 address(es) in namespace: %s",
strerror(-rc));
@@ -308,7 +309,7 @@ void pasta_ns_conf(struct ctx *c)
rc = nl_route_set_def(nl_sock_ns, c->pasta_ifi,
AF_INET, &c->ip4.gw);
else
- nl_route_dup(nl_sock, c->ifi4, nl_sock_ns,
+ rc = nl_route_dup(nl_sock, c->ifi4, nl_sock_ns,
c->pasta_ifi, AF_INET);
if (rc < 0)
die("Couldn't set IPv4 route(s) in guest: %s",
@@ -320,9 +321,9 @@ void pasta_ns_conf(struct ctx *c)
rc = nl_addr_set(nl_sock_ns, c->pasta_ifi,
AF_INET6, &c->ip6.addr, 64);
else
- nl_addr_dup(nl_sock, c->ifi6,
- nl_sock_ns, c->pasta_ifi,
- AF_INET6);
+ rc = nl_addr_dup(nl_sock, c->ifi6,
+ nl_sock_ns, c->pasta_ifi,
+ AF_INET6);
if (rc < 0)
die("Couldn't set IPv6 address(es) in namespace: %s",
strerror(-rc));
@@ -331,7 +332,7 @@ void pasta_ns_conf(struct ctx *c)
rc = nl_route_set_def(nl_sock_ns, c->pasta_ifi,
AF_INET6, &c->ip6.gw);
else
- nl_route_dup(nl_sock, c->ifi6,
+ rc = nl_route_dup(nl_sock, c->ifi6,
nl_sock_ns, c->pasta_ifi,
AF_INET6);
if (rc < 0)
--
@@ -298,8 +298,9 @@ void pasta_ns_conf(struct ctx *c)
&c->ip4.addr,
c->ip4.prefix_len);
else
- nl_addr_dup(nl_sock, c->ifi4,
- nl_sock_ns, c->pasta_ifi, AF_INET);
+ rc = nl_addr_dup(nl_sock, c->ifi4,
+ nl_sock_ns, c->pasta_ifi,
+ AF_INET);
if (rc < 0)
die("Couldn't set IPv4 address(es) in namespace: %s",
strerror(-rc));
@@ -308,7 +309,7 @@ void pasta_ns_conf(struct ctx *c)
rc = nl_route_set_def(nl_sock_ns, c->pasta_ifi,
AF_INET, &c->ip4.gw);
else
- nl_route_dup(nl_sock, c->ifi4, nl_sock_ns,
+ rc = nl_route_dup(nl_sock, c->ifi4, nl_sock_ns,
c->pasta_ifi, AF_INET);
if (rc < 0)
die("Couldn't set IPv4 route(s) in guest: %s",
@@ -320,9 +321,9 @@ void pasta_ns_conf(struct ctx *c)
rc = nl_addr_set(nl_sock_ns, c->pasta_ifi,
AF_INET6, &c->ip6.addr, 64);
else
- nl_addr_dup(nl_sock, c->ifi6,
- nl_sock_ns, c->pasta_ifi,
- AF_INET6);
+ rc = nl_addr_dup(nl_sock, c->ifi6,
+ nl_sock_ns, c->pasta_ifi,
+ AF_INET6);
if (rc < 0)
die("Couldn't set IPv6 address(es) in namespace: %s",
strerror(-rc));
@@ -331,7 +332,7 @@ void pasta_ns_conf(struct ctx *c)
rc = nl_route_set_def(nl_sock_ns, c->pasta_ifi,
AF_INET6, &c->ip6.gw);
else
- nl_route_dup(nl_sock, c->ifi6,
+ rc = nl_route_dup(nl_sock, c->ifi6,
nl_sock_ns, c->pasta_ifi,
AF_INET6);
if (rc < 0)
--
2.41.0
next prev parent reply other threads:[~2023-08-03 7:20 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-03 7:19 [PATCH v2 00/17] netlink fixes and cleanups David Gibson
2023-08-03 7:19 ` [PATCH v2 01/17] netlink: Split up functionality of nl_link() David Gibson
2023-08-03 7:19 ` [PATCH v2 02/17] netlink: Split nl_addr() into separate operation functions David Gibson
2023-08-03 7:19 ` [PATCH v2 03/17] netlink: Split nl_route() " David Gibson
2023-08-03 7:19 ` [PATCH v2 04/17] netlink: Use struct in_addr for IPv4 addresses, not bare uint32_t David Gibson
2023-08-03 7:19 ` [PATCH v2 05/17] netlink: Explicitly pass netlink sockets to operations David Gibson
2023-08-03 7:19 ` [PATCH v2 06/17] netlink: Make nl_*_dup() use a separate datagram for each request David Gibson
2023-08-03 7:19 ` [PATCH v2 07/17] netlink: Start sequence number from 1 instead of 0 David Gibson
2023-08-03 7:19 ` [PATCH v2 08/17] netlink: Treat send() or recv() errors as fatal David Gibson
2023-08-03 7:19 ` [PATCH v2 09/17] netlink: Fill in netlink header fields from nl_req() David Gibson
2023-08-03 7:19 ` [PATCH v2 10/17] netlink: Add nl_do() helper for simple operations with error checking David Gibson
2023-08-03 7:19 ` [PATCH v2 11/17] netlink: Clearer reasoning about the netlink response buffer size David Gibson
2023-08-03 7:19 ` [PATCH v2 12/17] netlink: Split nl_req() to allow processing multiple response datagrams David Gibson
2023-08-03 7:19 ` [PATCH v2 13/17] netlink: Add nl_foreach_oftype to filter response message types David Gibson
2023-08-03 7:19 ` [PATCH v2 14/17] netlink: Propagate errors for "set" operations David Gibson
2023-08-03 7:19 ` [PATCH v2 15/17] netlink: Always process all responses to a netlink request David Gibson
2023-08-03 7:19 ` [PATCH v2 16/17] netlink: Propagate errors for "dump" operations David Gibson
2023-08-03 7:19 ` David Gibson [this message]
2023-08-04 7:04 ` [PATCH v2 00/17] netlink fixes and cleanups Stefano Brivio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230803071956.3198452-18-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=passt-dev@passt.top \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).