From: David Gibson <david@gibson.dropbear.id.au>
To: Stefano Brivio <sbrivio@redhat.com>, passt-dev@passt.top
Cc: Paul Holzinger <pholzing@redhat.com>,
David Gibson <david@gibson.dropbear.id.au>
Subject: [PATCH 20/22] conf: Allow address remapped to host to be configured
Date: Fri, 16 Aug 2024 15:40:01 +1000 [thread overview]
Message-ID: <20240816054004.1335006-21-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20240816054004.1335006-1-david@gibson.dropbear.id.au>
Because the host and guest share the same IP address with passt/pasta, it's
not possible for the guest to directly address the host. Therefore we
allow packets from the guest going to a special "NAT to host" address to be
redirected to the host, appearing there as though they have both source and
destination address of loopback.
Currently that special address is always the address of the default
gateway (or none). That can be a problem if we want that gateway to be
addressable by the guest. Therefore, allow the special "NAT to host"
address to be overridden on the command line with a new --nat-host-loopback
option.
In order to exercise and test it, update the passt_in_ns and perf
tests to use this option and give different mapping addresses for the
two layers of the environment.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
conf.c | 57 +++++++++++++++++++++++++++++++--
passt.1 | 16 ++++++++++
test/lib/setup | 11 +++++--
test/passt_in_ns/dhcp | 73 +++++++++++++++++++++++++++++++++++++++++++
test/passt_in_ns/tcp | 38 +++++++++++-----------
test/passt_in_ns/udp | 22 +++++++------
test/perf/passt_tcp | 33 +++++++++----------
test/perf/passt_udp | 31 +++++++++---------
test/perf/pasta_tcp | 29 ++++++++---------
test/perf/pasta_udp | 25 ++++++++-------
test/run | 4 +--
11 files changed, 244 insertions(+), 95 deletions(-)
create mode 100644 test/passt_in_ns/dhcp
diff --git a/conf.c b/conf.c
index 26373584..c5831e82 100644
--- a/conf.c
+++ b/conf.c
@@ -817,6 +817,14 @@ static void usage(const char *name, FILE *f, int status)
fprintf(f, " --no-dhcp-search No list in DHCP/DHCPv6/NDP\n");
fprintf(f,
+ " --nat-host-loopback ADDR NAT ADDR to refer to host\n"
+ " Packets from the guest to ADDR will be redirected to the\n"
+ " host. On the host such packets will appear to have both\n"
+ " source and destination of loopback (127.0.0.1 or ::1).\n"
+ " ADDR can be 'none', in which case nothing is mapped\n"
+ " Can be specified zero to two (for IPv4 and IPv6)\n"
+ " default: gateway address, or none if --no-map-gw is also\n"
+ " specified\n"
" --dns-forward ADDR Forward DNS queries sent to ADDR\n"
" can be specified zero to two times (for IPv4 and IPv6)\n"
" default: don't forward DNS queries\n"
@@ -959,6 +967,11 @@ static void conf_print(const struct ctx *c)
info(" host: %s", eth_ntop(c->our_tap_mac, bufmac, sizeof(bufmac)));
if (c->ifi4) {
+ if (!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.nat_host_loopback))
+ info(" NAT to host 127.0.0.1: %s",
+ inet_ntop(AF_INET, &c->ip4.nat_host_loopback,
+ buf4, sizeof(buf4)));
+
if (!c->no_dhcp) {
uint32_t mask;
@@ -989,6 +1002,11 @@ static void conf_print(const struct ctx *c)
}
if (c->ifi6) {
+ if (!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.nat_host_loopback))
+ info(" NAT to host ::1: %s",
+ inet_ntop(AF_INET6, &c->ip6.nat_host_loopback,
+ buf6, sizeof(buf6)));
+
if (!c->no_ndp && !c->no_dhcpv6)
info("NDP/DHCPv6:");
else if (!c->no_ndp)
@@ -1122,6 +1140,35 @@ static void conf_ugid(char *runas, uid_t *uid, gid_t *gid)
}
}
+/**
+ * conf_nat() - Parse --nat-host-loopback option
+ * @c: Execution context
+ * @arg: String argument to --nat-host-loopback
+ * @no_map_gw: --no-map-gw flag, updated for "none" argument
+ */
+static void conf_nat(struct ctx *c, const char *arg, int *no_map_gw)
+{
+ if (strcmp(arg, "none") == 0) {
+ c->ip4.nat_host_loopback = in4addr_any;
+ c->ip6.nat_host_loopback = in6addr_any;
+ *no_map_gw = 1;
+ }
+
+ if (inet_pton(AF_INET6, arg, &c->ip6.nat_host_loopback) &&
+ !IN6_IS_ADDR_UNSPECIFIED(&c->ip6.nat_host_loopback) &&
+ !IN6_IS_ADDR_LOOPBACK(&c->ip6.nat_host_loopback) &&
+ !IN6_IS_ADDR_MULTICAST(&c->ip6.nat_host_loopback))
+ return;
+
+ if (inet_pton(AF_INET, arg, &c->ip4.nat_host_loopback) &&
+ !IN4_IS_ADDR_UNSPECIFIED(&c->ip4.nat_host_loopback) &&
+ !IN4_IS_ADDR_LOOPBACK(&c->ip4.nat_host_loopback) &&
+ !IN4_IS_ADDR_MULTICAST(&c->ip4.nat_host_loopback))
+ return;
+
+ die("Invalid address to remap to host: %s", optarg);
+}
+
/**
* conf_open_files() - Open files as requested by configuration
* @c: Execution context
@@ -1231,6 +1278,7 @@ void conf(struct ctx *c, int argc, char **argv)
{"no-copy-routes", no_argument, NULL, 18 },
{"no-copy-addrs", no_argument, NULL, 19 },
{"netns-only", no_argument, NULL, 20 },
+ {"nat-host-loopback", required_argument, NULL, 21 },
{ 0 },
};
const char *logname = (c->mode == MODE_PASTA) ? "pasta" : "passt";
@@ -1400,6 +1448,9 @@ void conf(struct ctx *c, int argc, char **argv)
netns_only = 1;
*userns = 0;
break;
+ case 21:
+ conf_nat(c, optarg, &no_map_gw);
+ break;
case 'd':
c->debug = 1;
c->quiet = 0;
@@ -1639,10 +1690,12 @@ void conf(struct ctx *c, int argc, char **argv)
(*c->ip6.ifname_out && !c->ifi6))
die("External interface not usable");
- if (c->ifi4 && !no_map_gw)
+ if (c->ifi4 && !no_map_gw &&
+ IN4_IS_ADDR_UNSPECIFIED(&c->ip4.nat_host_loopback))
c->ip4.nat_host_loopback = c->ip4.guest_gw;
- if (c->ifi6 && !no_map_gw)
+ if (c->ifi6 && !no_map_gw &&
+ IN6_IS_ADDR_UNSPECIFIED(&c->ip6.nat_host_loopback))
c->ip6.nat_host_loopback = c->ip6.guest_gw;
if (c->ifi4 && IN4_IS_ADDR_UNSPECIFIED(&c->ip4.our_tap_addr))
diff --git a/passt.1 b/passt.1
index dca433b6..3680056a 100644
--- a/passt.1
+++ b/passt.1
@@ -327,6 +327,22 @@ namespace will be silently dropped.
Disable Router Advertisements. Router Solicitations coming from guest or target
namespace will be ignored.
+.TP
+.BR \-\-nat-host-loopback " " \fIaddr
+Translate \fIaddr\fR to refer to the host. Packets from the guest to
+\fIaddr\fR will be redirected to the host. On the host such packets
+will appear to have both source and destination of loopback (127.0.0.1
+or ::1).
+
+If \fIaddr\fR is 'none', no address is mapped (this implies
+\fB--no-map-gw\fR). Only one IPv4 and one IPv6 address can be
+translated, if the option is specified multiple times, the last one
+takes effect.
+
+Default is to translate the guest's default gateway address, unless
+\fB--no-map-gw\fR is also given, in which case no address is mapped by
+default.
+
.TP
.BR \-\-no-map-gw
Don't remap TCP connections and untracked UDP traffic, with the gateway address
diff --git a/test/lib/setup b/test/lib/setup
index 9b39b9fe..061bf997 100755
--- a/test/lib/setup
+++ b/test/lib/setup
@@ -124,7 +124,12 @@ setup_passt_in_ns() {
[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
- context_run_bg pasta "./pasta ${__opts} -t 10001,10002,10011,10012 -T 10003,10013 -u 10001,10002,10011,10012 -U 10003,10013 -P ${STATESETUP}/pasta.pid --config-net ${NSTOOL} hold ${STATESETUP}/ns.hold"
+ __nat_host4=192.0.2.1
+ __nat_host6=2001:db8:9a55::1
+ __nat_ns4=192.0.2.2
+ __nat_ns6=2001:db8:9a55::2
+
+ context_run_bg pasta "./pasta ${__opts} -t 10001,10002,10011,10012 -T 10003,10013 -u 10001,10002,10011,10012 -U 10003,10013 -P ${STATESETUP}/pasta.pid --nat-host-loopback ${__nat_host4} --nat-host-loopback ${__nat_host6} --config-net ${NSTOOL} hold ${STATESETUP}/ns.hold"
wait_for [ -f "${STATESETUP}/pasta.pid" ]
context_setup_nstool qemu ${STATESETUP}/ns.hold
@@ -139,11 +144,11 @@ setup_passt_in_ns() {
if [ ${VALGRIND} -eq 1 ]; then
context_run passt "make clean"
context_run passt "make valgrind"
- context_run_bg passt "valgrind --max-stackframe=$((4 * 1024 * 1024)) --trace-children=yes --vgdb=no --error-exitcode=1 --suppressions=test/valgrind.supp ./passt -f ${__opts} -s ${STATESETUP}/passt.socket -t 10001,10011,10021,10031 -u 10001,10011,10021,10031 -P ${STATESETUP}/passt.pid"
+ context_run_bg passt "valgrind --max-stackframe=$((4 * 1024 * 1024)) --trace-children=yes --vgdb=no --error-exitcode=1 --suppressions=test/valgrind.supp ./passt -f ${__opts} -s ${STATESETUP}/passt.socket -t 10001,10011,10021,10031 -u 10001,10011,10021,10031 -P ${STATESETUP}/passt.pid --nat-host-loopback ${__nat_ns4} --nat-host-loopback ${__nat_ns6}"
else
context_run passt "make clean"
context_run passt "make"
- context_run_bg passt "./passt -f ${__opts} -s ${STATESETUP}/passt.socket -t 10001,10011,10021,10031 -u 10001,10011,10021,10031 -P ${STATESETUP}/passt.pid"
+ context_run_bg passt "./passt -f ${__opts} -s ${STATESETUP}/passt.socket -t 10001,10011,10021,10031 -u 10001,10011,10021,10031 -P ${STATESETUP}/passt.pid --nat-host-loopback ${__nat_ns4} --nat-host-loopback ${__nat_ns6}"
fi
wait_for [ -f "${STATESETUP}/passt.pid" ]
diff --git a/test/passt_in_ns/dhcp b/test/passt_in_ns/dhcp
new file mode 100644
index 00000000..48c7d197
--- /dev/null
+++ b/test/passt_in_ns/dhcp
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+# for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+# for network namespace/tap device mode
+#
+# test/passt/dhcp - Check DHCP and DHCPv6 functionality in passt mode
+#
+# Copyright (c) 2021 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+gtools ip jq dhclient sed tr
+htools ip jq sed tr head
+
+set NAT_NS4 192.0.2.2
+set NAT_NS6 2001:db8:9a55::2
+
+test Interface name
+gout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+hout HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check [ -n "__IFNAME__" ]
+
+test DHCP: address
+guest /sbin/dhclient -4 __IFNAME__
+gout ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME__").addr_info[0].local'
+hout HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check [ "__ADDR__" = "__HOST_ADDR__" ]
+
+test DHCP: route
+gout GW ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
+hout HOST_GW ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").gateway] | .[0]'
+check [ "__GW__" = "__HOST_GW__" ]
+
+test DHCP: MTU
+gout MTU ip -j link show | jq -rM '.[] | select(.ifname == "__IFNAME__").mtu'
+check [ __MTU__ = 65520 ]
+
+test DHCP: DNS
+gout DNS sed -n 's/^nameserver \([0-9]*\.\)\(.*\)/\1\2/p' /etc/resolv.conf | tr '\n' ',' | sed 's/,$//;s/$/\n/'
+hout HOST_DNS sed -n 's/^nameserver \([0-9]*\.\)\(.*\)/\1\2/p' /etc/resolv.conf | head -n3 | tr '\n' ',' | sed 's/,$//;s/$/\n/'
+check [ "__DNS__" = "__HOST_DNS__" ] || ( [ "__DNS__" = "__NAT_NS4__" ] && expr "__HOST_DNS__" : "127[.]" )
+
+# FQDNs should be terminated by dots, but the guest DHCP client might omit them:
+# strip them first
+test DHCP: search list
+gout SEARCH sed 's/\. / /g' /etc/resolv.conf | sed 's/\.$//g' | sed -n 's/^search \(.*\)/\1/p' | tr ' \n' ',' | sed 's/,$//;s/$/\n/'
+hout HOST_SEARCH sed 's/\. / /g' /etc/resolv.conf | sed 's/\.$//g' | sed -n 's/^search \(.*\)/\1/p' | tr ' \n' ',' | sed 's/,$//;s/$/\n/'
+check [ "__SEARCH__" = "__HOST_SEARCH__" ]
+
+test DHCPv6: address
+guest /sbin/dhclient -6 __IFNAME__
+gout ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__IFNAME__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and .deprecated != true).local] | .[0]'
+check [ "__ADDR6__" = "__HOST_ADDR6__" ]
+
+test DHCPv6: route
+gout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst == "default").gateway'
+hout HOST_GW6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").gateway] | .[0]'
+check [ "__GW6__" = "__HOST_GW6__" ]
+
+# Strip interface specifier: interface names might differ between host and guest
+test DHCPv6: DNS
+gout DNS6 sed -n 's/^nameserver \([^:]*:\)\([^%]*\).*/\1\2/p' /etc/resolv.conf | tr '\n' ',' | sed 's/,$//;s/$/\n/'
+hout HOST_DNS6 sed -n 's/^nameserver \([^:]*:\)\([^%]*\).*/\1\2/p' /etc/resolv.conf | tr '\n' ',' | sed 's/,$//;s/$/\n/'
+check [ "__DNS6__" = "__HOST_DNS6__" ] || [ "__DNS6__" = "__NAT_NS6__" -a "__HOST_DNS6__" = "::1" ]
+
+test DHCPv6: search list
+gout SEARCH6 sed 's/\. / /g' /etc/resolv.conf | sed 's/\.$//g' | sed -n 's/^search \(.*\)/\1/p' | tr ' \n' ',' | sed 's/,$//;s/$/\n/'
+hout HOST_SEARCH6 sed 's/\. / /g' /etc/resolv.conf | sed 's/\.$//g' | sed -n 's/^search \(.*\)/\1/p' | tr ' \n' ',' | sed 's/,$//;s/$/\n/'
+check [ "__SEARCH6__" = "__HOST_SEARCH6__" ]
diff --git a/test/passt_in_ns/tcp b/test/passt_in_ns/tcp
index cdb7060c..919333ca 100644
--- a/test/passt_in_ns/tcp
+++ b/test/passt_in_ns/tcp
@@ -15,6 +15,11 @@ gtools socat ip jq
htools socat ip jq
nstools socat ip jq
+set NAT_HOST4 192.0.2.1
+set NAT_HOST6 2001:db8:9a55::1
+set NAT_NS4 192.0.2.2
+set NAT_NS6 2001:db8:9a55::2
+
set TEMP_BIG __STATEDIR__/test_big.bin
set TEMP_SMALL __STATEDIR__/test_small.bin
set TEMP_NS_BIG __STATEDIR__/test_ns_big.bin
@@ -36,16 +41,15 @@ check cmp __TEMP_NS_BIG__ __BASEPATH__/big.bin
test TCP/IPv4: guest to host: big transfer
hostb socat -u TCP4-LISTEN:10003 OPEN:__TEMP_BIG__,create,trunc
-gout GW ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
sleep 1
-guest socat -u OPEN:/root/big.bin TCP4:__GW__:10003
+guest socat -u OPEN:/root/big.bin TCP4:__NAT_HOST4__:10003
hostw
check cmp __TEMP_BIG__ __BASEPATH__/big.bin
test TCP/IPv4: guest to ns: big transfer
nsb socat -u TCP4-LISTEN:10002 OPEN:__TEMP_NS_BIG__,create,trunc
sleep 1
-guest socat -u OPEN:/root/big.bin TCP4:__GW__:10002
+guest socat -u OPEN:/root/big.bin TCP4:__NAT_NS4__:10002
nsw
check cmp __TEMP_NS_BIG__ __BASEPATH__/big.bin
@@ -59,7 +63,7 @@ check cmp __TEMP_BIG__ __BASEPATH__/big.bin
test TCP/IPv4: ns to host (via tap): big transfer
hostb socat -u TCP4-LISTEN:10003 OPEN:__TEMP_BIG__,create,trunc
sleep 1
-ns socat -u OPEN:__BASEPATH__/big.bin TCP4:__GW__:10003
+ns socat -u OPEN:__BASEPATH__/big.bin TCP4:__NAT_HOST4__:10003
hostw
check cmp __TEMP_BIG__ __BASEPATH__/big.bin
@@ -95,16 +99,15 @@ check cmp __TEMP_NS_SMALL__ __BASEPATH__/small.bin
test TCP/IPv4: guest to host: small transfer
hostb socat -u TCP4-LISTEN:10003 OPEN:__TEMP_SMALL__,create,trunc
-gout GW ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
sleep 1
-guest socat -u OPEN:/root/small.bin TCP4:__GW__:10003
+guest socat -u OPEN:/root/small.bin TCP4:__NAT_HOST4__:10003
hostw
check cmp __TEMP_SMALL__ __BASEPATH__/small.bin
test TCP/IPv4: guest to ns: small transfer
nsb socat -u TCP4-LISTEN:10002 OPEN:__TEMP_NS_SMALL__,create,trunc
sleep 1
-guest socat -u OPEN:/root/small.bin TCP4:__GW__:10002
+guest socat -u OPEN:/root/small.bin TCP4:__NAT_NS4__:10002
nsw
check cmp __TEMP_NS_SMALL__ __BASEPATH__/small.bin
@@ -118,7 +121,7 @@ check cmp __TEMP_SMALL__ __BASEPATH__/small.bin
test TCP/IPv4: ns to host (via tap): small transfer
hostb socat -u TCP4-LISTEN:10003 OPEN:__TEMP_SMALL__,create,trunc
sleep 1
-ns socat -u OPEN:__BASEPATH__/small.bin TCP4:__GW__:10003
+ns socat -u OPEN:__BASEPATH__/small.bin TCP4:__NAT_HOST4__:10003
hostw
check cmp __TEMP_SMALL__ __BASEPATH__/small.bin
@@ -152,17 +155,15 @@ check cmp __TEMP_NS_BIG__ __BASEPATH__/big.bin
test TCP/IPv6: guest to host: big transfer
hostb socat -u TCP6-LISTEN:10003 OPEN:__TEMP_BIG__,create,trunc
-gout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst == "default").gateway'
-gout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
sleep 1
-guest socat -u OPEN:/root/big.bin TCP6:[__GW6__%__IFNAME__]:10003
+guest socat -u OPEN:/root/big.bin TCP6:[__NAT_HOST6__]:10003
hostw
check cmp __TEMP_BIG__ __BASEPATH__/big.bin
test TCP/IPv6: guest to ns: big transfer
nsb socat -u TCP6-LISTEN:10002 OPEN:__TEMP_NS_BIG__,create,trunc
sleep 1
-guest socat -u OPEN:/root/big.bin TCP6:[__GW6__%__IFNAME__]:10002
+guest socat -u OPEN:/root/big.bin TCP6:[__NAT_NS6__]:10002
nsw
check cmp __TEMP_NS_BIG__ __BASEPATH__/big.bin
@@ -175,9 +176,8 @@ check cmp __TEMP_BIG__ __BASEPATH__/big.bin
test TCP/IPv6: ns to host (via tap): big transfer
hostb socat -u TCP6-LISTEN:10003 OPEN:__TEMP_BIG__,create,trunc
-nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
sleep 1
-ns socat -u OPEN:__BASEPATH__/big.bin TCP6:[__GW6__%__IFNAME__]:10003
+ns socat -u OPEN:__BASEPATH__/big.bin TCP6:[__NAT_HOST6__]:10003
hostw
check cmp __TEMP_BIG__ __BASEPATH__/big.bin
@@ -190,6 +190,7 @@ guest cmp test_big.bin /root/big.bin
test TCP/IPv6: ns to guest (using namespace address): big transfer
guestb socat -u TCP6-LISTEN:10001 OPEN:test_big.bin,create,trunc
+nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
nsout ADDR6 ip -j -6 addr show|jq -rM '.[] | select(.ifname == "__IFNAME__").addr_info[0].local'
sleep 1
ns socat -u OPEN:__BASEPATH__/big.bin TCP6:[__ADDR6__]:10001
@@ -212,17 +213,15 @@ check cmp __TEMP_NS_SMALL__ __BASEPATH__/small.bin
test TCP/IPv6: guest to host: small transfer
hostb socat -u TCP6-LISTEN:10003 OPEN:__TEMP_SMALL__,create,trunc
-gout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst == "default").gateway'
-gout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
sleep 1
-guest socat -u OPEN:/root/small.bin TCP6:[__GW6__%__IFNAME__]:10003
+guest socat -u OPEN:/root/small.bin TCP6:[__NAT_HOST6__]:10003
hostw
check cmp __TEMP_SMALL__ __BASEPATH__/small.bin
test TCP/IPv6: guest to ns: small transfer
nsb socat -u TCP6-LISTEN:10002 OPEN:__TEMP_NS_SMALL__
sleep 1
-guest socat -u OPEN:/root/small.bin TCP6:[__GW6__%__IFNAME__]:10002
+guest socat -u OPEN:/root/small.bin TCP6:[__NAT_NS6__]:10002
nsw
check cmp __TEMP_NS_SMALL__ __BASEPATH__/small.bin
@@ -235,9 +234,8 @@ check cmp __TEMP_SMALL__ __BASEPATH__/small.bin
test TCP/IPv6: ns to host (via tap): small transfer
hostb socat -u TCP6-LISTEN:10003 OPEN:__TEMP_SMALL__,create,trunc
-nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
sleep 1
-ns socat -u OPEN:__BASEPATH__/small.bin TCP6:[__GW6__%__IFNAME__]:10003
+ns socat -u OPEN:__BASEPATH__/small.bin TCP6:[__NAT_HOST6__]:10003
hostw
check cmp __TEMP_SMALL__ __BASEPATH__/small.bin
diff --git a/test/passt_in_ns/udp b/test/passt_in_ns/udp
index 8a025131..0e3574f5 100644
--- a/test/passt_in_ns/udp
+++ b/test/passt_in_ns/udp
@@ -15,6 +15,11 @@ gtools socat ip jq
nstools socat ip jq
htools socat ip jq
+set NAT_HOST4 192.0.2.1
+set NAT_HOST6 2001:db8:9a55::1
+set NAT_NS4 192.0.2.2
+set NAT_NS6 2001:db8:9a55::2
+
set TEMP __STATEDIR__/test.bin
set TEMP_NS __STATEDIR__/test_ns.bin
@@ -34,16 +39,15 @@ check cmp __TEMP_NS__ __BASEPATH__/medium.bin
test UDP/IPv4: guest to host
hostb socat -u UDP4-LISTEN:10003,null-eof OPEN:__TEMP__,create,trunc
-gout GW ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
sleep 1
-guest socat -u OPEN:/root/medium.bin UDP4:__GW__:10003,shut-null
+guest socat -u OPEN:/root/medium.bin UDP4:__NAT_HOST4__:10003,shut-null
hostw
check cmp __TEMP__ __BASEPATH__/medium.bin
test UDP/IPv4: guest to ns
nsb socat -u UDP4-LISTEN:10002,null-eof OPEN:__TEMP_NS__,create,trunc
sleep 1
-guest socat -u OPEN:/root/medium.bin UDP4:__GW__:10002,shut-null
+guest socat -u OPEN:/root/medium.bin UDP4:__NAT_NS4__:10002,shut-null
nsw
check cmp __TEMP_NS__ __BASEPATH__/medium.bin
@@ -57,7 +61,7 @@ check cmp __TEMP__ __BASEPATH__/medium.bin
test UDP/IPv4: ns to host (via tap)
hostb socat -u UDP4-LISTEN:10003,null-eof OPEN:__TEMP__,create,trunc
sleep 1
-ns socat -u OPEN:__BASEPATH__/medium.bin UDP4:__GW__:10003,shut-null
+ns socat -u OPEN:__BASEPATH__/medium.bin UDP4:__NAT_HOST4__:10003,shut-null
hostw
check cmp __TEMP__ __BASEPATH__/medium.bin
@@ -93,17 +97,15 @@ check cmp __TEMP_NS__ __BASEPATH__/medium.bin
test UDP/IPv6: guest to host
hostb socat -u UDP6-LISTEN:10003,null-eof OPEN:__TEMP__,create,trunc
-gout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst == "default").gateway'
-gout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
sleep 1
-guest socat -u OPEN:/root/medium.bin UDP6:[__GW6__%__IFNAME__]:10003,shut-null
+guest socat -u OPEN:/root/medium.bin UDP6:[__NAT_HOST6__]:10003,shut-null
hostw
check cmp __TEMP__ __BASEPATH__/medium.bin
test UDP/IPv6: guest to ns
nsb socat -u UDP6-LISTEN:10002,null-eof OPEN:__TEMP_NS__,create,trunc
sleep 1
-guest socat -u OPEN:/root/medium.bin UDP6:[__GW6__%__IFNAME__]:10002,shut-null
+guest socat -u OPEN:/root/medium.bin UDP6:[__NAT_NS6__]:10002,shut-null
nsw
check cmp __TEMP_NS__ __BASEPATH__/medium.bin
@@ -116,9 +118,8 @@ check cmp __TEMP__ __BASEPATH__/medium.bin
test UDP/IPv6: ns to host (via tap)
hostb socat -u UDP6-LISTEN:10003,null-eof OPEN:__TEMP__,create,trunc
-nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
sleep 1
-ns socat -u OPEN:__BASEPATH__/medium.bin UDP6:[__GW6__%__IFNAME__]:10003,shut-null
+ns socat -u OPEN:__BASEPATH__/medium.bin UDP6:[__NAT_HOST6__]:10003,shut-null
hostw
check cmp __TEMP__ __BASEPATH__/medium.bin
@@ -131,6 +132,7 @@ guest cmp test.bin /root/medium.bin
test UDP/IPv6: ns to guest (using namespace address)
guestb socat -u UDP6-LISTEN:10001,null-eof OPEN:test.bin,create,trunc
+nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
nsout ADDR6 ip -j -6 addr show|jq -rM '.[] | select(.ifname == "__IFNAME__").addr_info[0].local'
sleep 1
ns socat -u OPEN:__BASEPATH__/medium.bin UDP6:[__ADDR6__]:10001,shut-null
diff --git a/test/perf/passt_tcp b/test/perf/passt_tcp
index 695479f3..ae03c7df 100644
--- a/test/perf/passt_tcp
+++ b/test/perf/passt_tcp
@@ -15,6 +15,9 @@ gtools /sbin/sysctl ip jq nproc seq sleep iperf3 tcp_rr tcp_crr # From neper
nstools /sbin/sysctl ip jq nproc seq sleep iperf3 tcp_rr tcp_crr
htools bc head sed seq
+set NAT_NS4 192.0.2.2
+set NAT_NS6 2001:db8:9a55::2
+
test passt: throughput and latency
guest /sbin/sysctl -w net.core.rmem_max=536870912
@@ -29,8 +32,6 @@ ns /sbin/sysctl -w net.ipv4.tcp_rmem="4096 524288 134217728"
ns /sbin/sysctl -w net.ipv4.tcp_wmem="4096 524288 134217728"
ns /sbin/sysctl -w net.ipv4.tcp_timestamps=0
-gout GW ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
-gout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst == "default").gateway'
gout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
hout FREQ_PROCFS (echo "scale=1"; sed -n 's/cpu MHz.*: \([0-9]*\)\..*$/(\1+10^2\/2)\/10^3/p' /proc/cpuinfo) | bc -l | head -n1
@@ -54,16 +55,16 @@ iperf3s ns 10002
bw -
bw -
guest ip link set dev __IFNAME__ mtu 1280
-iperf3 BW guest __GW6__%__IFNAME__ 10002 __TIME__ __OPTS__ -w 4M
+iperf3 BW guest __NAT_NS6__ 10002 __TIME__ __OPTS__ -w 4M
bw __BW__ 1.2 1.5
guest ip link set dev __IFNAME__ mtu 1500
-iperf3 BW guest __GW6__%__IFNAME__ 10002 __TIME__ __OPTS__ -w 4M
+iperf3 BW guest __NAT_NS6__ 10002 __TIME__ __OPTS__ -w 4M
bw __BW__ 1.6 1.8
guest ip link set dev __IFNAME__ mtu 9000
-iperf3 BW guest __GW6__%__IFNAME__ 10002 __TIME__ __OPTS__ -w 8M
+iperf3 BW guest __NAT_NS6__ 10002 __TIME__ __OPTS__ -w 8M
bw __BW__ 4.0 5.0
guest ip link set dev __IFNAME__ mtu 65520
-iperf3 BW guest __GW6__%__IFNAME__ 10002 __TIME__ __OPTS__ -w 16M
+iperf3 BW guest __NAT_NS6__ 10002 __TIME__ __OPTS__ -w 16M
bw __BW__ 7.0 8.0
iperf3k ns
@@ -75,7 +76,7 @@ lat -
lat -
lat -
nsb tcp_rr --nolog -6
-gout LAT tcp_rr --nolog -l1 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
+gout LAT tcp_rr --nolog -l1 -6 -c -H __NAT_NS6__ | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
tl TCP CRR latency over IPv6: guest to host
@@ -85,29 +86,29 @@ lat -
lat -
lat -
nsb tcp_crr --nolog -6
-gout LAT tcp_crr --nolog -l1 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
+gout LAT tcp_crr --nolog -l1 -6 -c -H __NAT_NS6__ | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 500 400
tr TCP throughput over IPv4: guest to host
iperf3s ns 10002
guest ip link set dev __IFNAME__ mtu 256
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -w 1M
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -w 1M
bw __BW__ 0.2 0.3
guest ip link set dev __IFNAME__ mtu 576
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -w 1M
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -w 1M
bw __BW__ 0.5 0.8
guest ip link set dev __IFNAME__ mtu 1280
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -w 4M
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -w 4M
bw __BW__ 1.2 1.5
guest ip link set dev __IFNAME__ mtu 1500
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -w 4M
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -w 4M
bw __BW__ 1.6 1.8
guest ip link set dev __IFNAME__ mtu 9000
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -w 8M
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -w 8M
bw __BW__ 4.0 5.0
guest ip link set dev __IFNAME__ mtu 65520
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -w 16M
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -w 16M
bw __BW__ 7.0 8.0
iperf3k ns
@@ -119,7 +120,7 @@ lat -
lat -
lat -
nsb tcp_rr --nolog -4
-gout LAT tcp_rr --nolog -l1 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
+gout LAT tcp_rr --nolog -l1 -4 -c -H __NAT_NS4__ | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
tl TCP CRR latency over IPv4: guest to host
@@ -129,7 +130,7 @@ lat -
lat -
lat -
nsb tcp_crr --nolog -4
-gout LAT tcp_crr --nolog -l1 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
+gout LAT tcp_crr --nolog -l1 -4 -c -H __NAT_NS4__ | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 500 400
tr TCP throughput over IPv6: host to guest
diff --git a/test/perf/passt_udp b/test/perf/passt_udp
index f25c9033..2160797c 100644
--- a/test/perf/passt_udp
+++ b/test/perf/passt_udp
@@ -15,6 +15,9 @@ gtools /sbin/sysctl ip jq nproc sleep iperf3 udp_rr # From neper
nstools ip jq sleep iperf3 udp_rr
htools bc head sed
+set NAT_NS4 192.0.2.2
+set NAT_NS6 2001:db8:9a55::2
+
test passt: throughput and latency
guest /sbin/sysctl -w net.core.rmem_max=16777216
@@ -22,10 +25,6 @@ guest /sbin/sysctl -w net.core.wmem_max=16777216
guest /sbin/sysctl -w net.core.rmem_default=16777216
guest /sbin/sysctl -w net.core.wmem_default=16777216
-gout GW ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
-gout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst == "default").gateway'
-gout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
-
hout FREQ_PROCFS (echo "scale=1"; sed -n 's/cpu MHz.*: \([0-9]*\)\..*$/(\1+10^2\/2)\/10^3/p' /proc/cpuinfo) | bc -l | head -n1
hout FREQ_CPUFREQ (echo "scale=1"; printf '( %i + 10^5 / 2 ) / 10^6\n' $(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq) ) | bc -l
hout FREQ [ -n "__FREQ_CPUFREQ__" ] && echo __FREQ_CPUFREQ__ || echo __FREQ_PROCFS__
@@ -46,13 +45,13 @@ iperf3s ns 10002
bw -
bw -
-iperf3 BW guest __GW6__%__IFNAME__ 10002 __TIME__ __OPTS__ -b 3G -l 1232
+iperf3 BW guest __NAT_NS6__ 10002 __TIME__ __OPTS__ -b 3G -l 1232
bw __BW__ 0.8 1.2
-iperf3 BW guest __GW6__%__IFNAME__ 10002 __TIME__ __OPTS__ -b 4G -l 1452
+iperf3 BW guest __NAT_NS6__ 10002 __TIME__ __OPTS__ -b 4G -l 1452
bw __BW__ 1.0 1.5
-iperf3 BW guest __GW6__%__IFNAME__ 10002 __TIME__ __OPTS__ -b 8G -l 8952
+iperf3 BW guest __NAT_NS6__ 10002 __TIME__ __OPTS__ -b 8G -l 8952
bw __BW__ 4.0 5.0
-iperf3 BW guest __GW6__%__IFNAME__ 10002 __TIME__ __OPTS__ -b 15G -l 64372
+iperf3 BW guest __NAT_NS6__ 10002 __TIME__ __OPTS__ -b 15G -l 64372
bw __BW__ 4.0 5.0
iperf3k ns
@@ -64,7 +63,7 @@ lat -
lat -
lat -
nsb udp_rr --nolog -6
-gout LAT udp_rr --nolog -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
+gout LAT udp_rr --nolog -6 -c -H __NAT_NS6__ | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
@@ -72,17 +71,17 @@ tr UDP throughput over IPv4: guest to host
iperf3s ns 10002
# (datagram size) = (packet size) - 28: 20 bytes of IPv4 header, 8 of UDP header
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -b 1G -l 228
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -b 1G -l 228
bw __BW__ 0.0 0.0
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -b 2G -l 548
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -b 2G -l 548
bw __BW__ 0.4 0.6
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -b 3G -l 1252
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -b 3G -l 1252
bw __BW__ 0.8 1.2
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -b 4G -l 1472
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -b 4G -l 1472
bw __BW__ 1.0 1.5
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -b 8G -l 8972
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -b 8G -l 8972
bw __BW__ 4.0 5.0
-iperf3 BW guest __GW__ 10002 __TIME__ __OPTS__ -b 15G -l 65492
+iperf3 BW guest __NAT_NS4__ 10002 __TIME__ __OPTS__ -b 15G -l 65492
bw __BW__ 4.0 5.0
iperf3k ns
@@ -94,7 +93,7 @@ lat -
lat -
lat -
nsb udp_rr --nolog -4
-gout LAT udp_rr --nolog -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
+gout LAT udp_rr --nolog -4 -c -H __NAT_NS4__ | sed -n 's/^throughput=\(.*\)/\1/p'
lat __LAT__ 200 150
diff --git a/test/perf/pasta_tcp b/test/perf/pasta_tcp
index a443f5a9..a6ea062c 100644
--- a/test/perf/pasta_tcp
+++ b/test/perf/pasta_tcp
@@ -14,6 +14,9 @@
htools head ip seq bc sleep iperf3 tcp_rr tcp_crr jq sed
nstools /sbin/sysctl nproc ip seq sleep iperf3 tcp_rr tcp_crr jq sed
+set NAT_HOST4 192.0.2.1
+set NAT_HOST6 2001:db8:9a55::1
+
test pasta: throughput and latency (local connections)
ns /sbin/sysctl -w net.ipv4.tcp_rmem="131072 524288 134217728"
@@ -122,8 +125,6 @@ te
test pasta: throughput and latency (connections via tap)
-nsout GW ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
-nsout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst == "default").gateway'
nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
set THREADS 2
set OPTS -Z -P __THREADS__ -i1 -O__OMIT__
@@ -137,16 +138,16 @@ tr TCP throughput over IPv6: ns to host
iperf3s host 10003
ns ip link set dev __IFNAME__ mtu 1500
-iperf3 BW ns __GW6__%__IFNAME__ 10003 __TIME__ __OPTS__ -w 512k
+iperf3 BW ns __NAT_HOST6__ 10003 __TIME__ __OPTS__ -w 512k
bw __BW__ 0.2 0.4
ns ip link set dev __IFNAME__ mtu 4000
-iperf3 BW ns __GW6__%__IFNAME__ 10003 __TIME__ __OPTS__ -w 1M
+iperf3 BW ns __NAT_HOST6__ 10003 __TIME__ __OPTS__ -w 1M
bw __BW__ 0.3 0.5
ns ip link set dev __IFNAME__ mtu 16384
-iperf3 BW ns __GW6__%__IFNAME__ 10003 __TIME__ __OPTS__ -w 8M
+iperf3 BW ns __NAT_HOST6__ 10003 __TIME__ __OPTS__ -w 8M
bw __BW__ 1.5 2.0
ns ip link set dev __IFNAME__ mtu 65520
-iperf3 BW ns __GW6__%__IFNAME__ 10003 __TIME__ __OPTS__ -w 8M
+iperf3 BW ns __NAT_HOST6__ 10003 __TIME__ __OPTS__ -w 8M
bw __BW__ 2.0 2.5
iperf3k host
@@ -156,7 +157,7 @@ lat -
lat -
lat -
hostb tcp_rr --nolog -P 10003 -C 10013 -6
-nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -6 -c -H __NAT_HOST6__ | sed -n 's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 150 100
@@ -165,7 +166,7 @@ lat -
lat -
lat -
hostb tcp_crr --nolog -P 10003 -C 10013 -6
-nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -6 -c -H __NAT_HOST6__ | sed -n 's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 1500 500
@@ -174,16 +175,16 @@ tr TCP throughput over IPv4: ns to host
iperf3s host 10003
ns ip link set dev __IFNAME__ mtu 1500
-iperf3 BW ns __GW__ 10003 __TIME__ __OPTS__ -w 512k
+iperf3 BW ns __NAT_HOST4__ 10003 __TIME__ __OPTS__ -w 512k
bw __BW__ 0.2 0.4
ns ip link set dev __IFNAME__ mtu 4000
-iperf3 BW ns __GW__ 10003 __TIME__ __OPTS__ -w 1M
+iperf3 BW ns __NAT_HOST4__ 10003 __TIME__ __OPTS__ -w 1M
bw __BW__ 0.3 0.5
ns ip link set dev __IFNAME__ mtu 16384
-iperf3 BW ns __GW__ 10003 __TIME__ __OPTS__ -w 8M
+iperf3 BW ns __NAT_HOST4__ 10003 __TIME__ __OPTS__ -w 8M
bw __BW__ 1.5 2.0
ns ip link set dev __IFNAME__ mtu 65520
-iperf3 BW ns __GW__ 10003 __TIME__ __OPTS__ -w 8M
+iperf3 BW ns __NAT_HOST4__ 10003 __TIME__ __OPTS__ -w 8M
bw __BW__ 2.0 2.5
iperf3k host
@@ -193,7 +194,7 @@ lat -
lat -
lat -
hostb tcp_rr --nolog -P 10003 -C 10013 -4
-nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -4 -c -H __NAT_HOST4__ | sed -n 's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 150 100
@@ -202,7 +203,7 @@ lat -
lat -
lat -
hostb tcp_crr --nolog -P 10003 -C 10013 -4
-nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
+nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -4 -c -H __NAT_HOST4__ | sed -n 's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 1500 500
diff --git a/test/perf/pasta_udp b/test/perf/pasta_udp
index 9fed62e4..146e41b8 100644
--- a/test/perf/pasta_udp
+++ b/test/perf/pasta_udp
@@ -14,6 +14,9 @@
htools bc head ip sleep iperf3 udp_rr jq sed
nstools ip sleep iperf3 udp_rr jq sed
+set NAT_HOST4 192.0.2.1
+set NAT_HOST6 2001:db8:9a55::1
+
test pasta: throughput and latency (local traffic)
hout FREQ_PROCFS (echo "scale=1"; sed -n 's/cpu MHz.*: \([0-9]*\)\..*$/(\1+10^2\/2)\/10^3/p' /proc/cpuinfo) | bc -l | head -n1
@@ -133,8 +136,6 @@ te
test pasta: throughput and latency (traffic via tap)
-nsout GW ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
-nsout GW6 ip -j -6 route show|jq -rM '.[] | select(.dst == "default").gateway'
nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
info Throughput in Gbps, latency in µs, one thread at __FREQ__ GHz
@@ -146,13 +147,13 @@ tr UDP throughput over IPv6: ns to host
iperf3s host 10003
# (datagram size) = (packet size) - 48: 40 bytes of IPv6 header, 8 of UDP header
-iperf3 BW ns __GW6__%__IFNAME__ 10003 __TIME__ __OPTS__ -b 8G -l 1472
+iperf3 BW ns __NAT_HOST6__ 10003 __TIME__ __OPTS__ -b 8G -l 1472
bw __BW__ 0.3 0.5
-iperf3 BW ns __GW6__%__IFNAME__ 10003 __TIME__ __OPTS__ -b 12G -l 3972
+iperf3 BW ns __NAT_HOST6__ 10003 __TIME__ __OPTS__ -b 12G -l 3972
bw __BW__ 0.5 0.8
-iperf3 BW ns __GW6__%__IFNAME__ 10003 __TIME__ __OPTS__ -b 20G -l 16356
+iperf3 BW ns __NAT_HOST6__ 10003 __TIME__ __OPTS__ -b 20G -l 16356
bw __BW__ 3.0 4.0
-iperf3 BW ns __GW6__%__IFNAME__ 10003 __TIME__ __OPTS__ -b 30G -l 65472
+iperf3 BW ns __NAT_HOST6__ 10003 __TIME__ __OPTS__ -b 30G -l 65472
bw __BW__ 6.0 7.0
iperf3k host
@@ -162,7 +163,7 @@ lat -
lat -
lat -
hostb udp_rr --nolog -P 10003 -C 10013 -6
-nsout LAT udp_rr --nolog -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
+nsout LAT udp_rr --nolog -P 10003 -C 10013 -6 -c -H __NAT_HOST6__ | sed -n 's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 200 150
@@ -171,13 +172,13 @@ tr UDP throughput over IPv4: ns to host
iperf3s host 10003
# (datagram size) = (packet size) - 28: 20 bytes of IPv4 header, 8 of UDP header
-iperf3 BW ns __GW__ 10003 __TIME__ __OPTS__ -b 8G -l 1472
+iperf3 BW ns __NAT_HOST4__ 10003 __TIME__ __OPTS__ -b 8G -l 1472
bw __BW__ 0.3 0.5
-iperf3 BW ns __GW__ 10003 __TIME__ __OPTS__ -b 12G -l 3972
+iperf3 BW ns __NAT_HOST4__ 10003 __TIME__ __OPTS__ -b 12G -l 3972
bw __BW__ 0.5 0.8
-iperf3 BW ns __GW__ 10003 __TIME__ __OPTS__ -b 20G -l 16356
+iperf3 BW ns __NAT_HOST4__ 10003 __TIME__ __OPTS__ -b 20G -l 16356
bw __BW__ 3.0 4.0
-iperf3 BW ns __GW__ 10003 __TIME__ __OPTS__ -b 30G -l 65492
+iperf3 BW ns __NAT_HOST4__ 10003 __TIME__ __OPTS__ -b 30G -l 65492
bw __BW__ 6.0 7.0
iperf3k host
@@ -187,7 +188,7 @@ lat -
lat -
lat -
hostb udp_rr --nolog -P 10003 -C 10013 -4
-nsout LAT udp_rr --nolog -P 10003 -C 10013 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
+nsout LAT udp_rr --nolog -P 10003 -C 10013 -4 -c -H __NAT_HOST4__ | sed -n 's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 200 150
diff --git a/test/run b/test/run
index 3b376639..cd6d7076 100755
--- a/test/run
+++ b/test/run
@@ -101,7 +101,7 @@ run() {
VALGRIND=1
setup passt_in_ns
test passt/ndp
- test passt/dhcp
+ test passt_in_ns/dhcp
test passt_in_ns/icmp
test passt_in_ns/tcp
test passt_in_ns/udp
@@ -115,7 +115,7 @@ run() {
VALGRIND=0
setup passt_in_ns
test passt/ndp
- test passt/dhcp
+ test passt_in_ns/dhcp
test perf/passt_tcp
test perf/passt_udp
test perf/pasta_tcp
--
@@ -101,7 +101,7 @@ run() {
VALGRIND=1
setup passt_in_ns
test passt/ndp
- test passt/dhcp
+ test passt_in_ns/dhcp
test passt_in_ns/icmp
test passt_in_ns/tcp
test passt_in_ns/udp
@@ -115,7 +115,7 @@ run() {
VALGRIND=0
setup passt_in_ns
test passt/ndp
- test passt/dhcp
+ test passt_in_ns/dhcp
test perf/passt_tcp
test perf/passt_udp
test perf/pasta_tcp
--
2.46.0
next prev parent reply other threads:[~2024-08-16 5:40 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-16 5:39 [PATCH 00/22] RFC: Allow configuration of special case NATs David Gibson
2024-08-16 5:39 ` [PATCH 01/22] treewide: Use "our address" instead of "forwarding address" David Gibson
2024-08-18 15:44 ` Stefano Brivio
2024-08-19 1:28 ` David Gibson
2024-08-16 5:39 ` [PATCH 02/22] util: Helper for formatting MAC addresses David Gibson
2024-08-18 15:44 ` Stefano Brivio
2024-08-19 1:29 ` David Gibson
2024-08-16 5:39 ` [PATCH 03/22] treewide: Rename MAC address fields for clarity David Gibson
2024-08-18 15:45 ` Stefano Brivio
2024-08-19 1:36 ` David Gibson
2024-08-16 5:39 ` [PATCH 04/22] treewide: Use struct assignment instead of memcpy() for IP addresses David Gibson
2024-08-18 15:45 ` Stefano Brivio
2024-08-19 1:38 ` David Gibson
2024-08-16 5:39 ` [PATCH 05/22] conf: Use array indices rather than pointers for DNS array slots David Gibson
2024-08-16 5:39 ` [PATCH 06/22] conf: More accurately count entries added in get_dns() David Gibson
2024-08-16 5:39 ` [PATCH 07/22] conf: Move DNS array bounds checks into add_dns[46] David Gibson
2024-08-16 5:39 ` [PATCH 08/22] conf: Move adding of a nameserver from resolv.conf into subfunction David Gibson
2024-08-16 5:39 ` [PATCH 09/22] conf: Correct setting of dns_match address in add_dns6() David Gibson
2024-08-16 5:39 ` [PATCH 10/22] conf: Treat --dns addresses as guest visible addresses David Gibson
2024-08-16 5:39 ` [PATCH 11/22] conf: Remove incorrect initialisation of addr_ll_seen David Gibson
2024-08-16 5:39 ` [PATCH 12/22] util: Correct sock_l4() binding for link local addresses David Gibson
2024-08-20 0:14 ` Stefano Brivio
2024-08-20 1:29 ` David Gibson
2024-08-16 5:39 ` [PATCH 13/22] treewide: Change misleading 'addr_ll' name David Gibson
2024-08-20 0:15 ` Stefano Brivio
2024-08-20 1:30 ` David Gibson
2024-08-16 5:39 ` [PATCH 14/22] Clarify which addresses in ip[46]_ctx are meaningful where David Gibson
2024-08-16 5:39 ` [PATCH 15/22] Initialise our_tap_ll to ip6.gw when suitable David Gibson
2024-08-16 5:39 ` [PATCH 16/22] fwd: Helpers to clarify what host addresses aren't guest accessible David Gibson
2024-08-20 19:56 ` Stefano Brivio
2024-08-21 1:40 ` David Gibson
2024-08-16 5:39 ` [PATCH 17/22] fwd: Split notion of "our tap address" from gateway for IPv4 David Gibson
2024-08-20 19:56 ` Stefano Brivio
2024-08-21 1:56 ` David Gibson
2024-08-16 5:39 ` [PATCH 18/22] Don't take "our" MAC address from the host David Gibson
2024-08-16 5:40 ` [PATCH 19/22] conf, fwd: Split notion of gateway/router from guest-visible host address David Gibson
2024-08-20 19:56 ` Stefano Brivio
2024-08-21 1:59 ` David Gibson
2024-08-16 5:40 ` David Gibson [this message]
2024-08-20 19:56 ` [PATCH 20/22] conf: Allow address remapped to host to be configured Stefano Brivio
2024-08-21 2:23 ` David Gibson
2024-08-16 5:40 ` [PATCH 21/22] fwd: Distinguish translatable from untranslatable addresses on inbound David Gibson
2024-08-16 5:40 ` [PATCH 22/22] fwd, conf: Allow NAT of the guest's assigned address David Gibson
2024-08-20 19:56 ` Stefano Brivio
2024-08-21 2:28 ` David Gibson
2024-08-16 14:45 ` [PATCH 00/22] RFC: Allow configuration of special case NATs Paul Holzinger
2024-08-16 15:03 ` Stefano Brivio
2024-08-17 8:01 ` David Gibson
2024-08-19 8:46 ` David Gibson
2024-08-19 9:27 ` Stefano Brivio
2024-08-19 9:52 ` David Gibson
2024-08-19 13:01 ` Stefano Brivio
2024-08-20 0:42 ` David Gibson
2024-08-20 20:39 ` Stefano Brivio
2024-08-21 2:51 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240816054004.1335006-21-david@gibson.dropbear.id.au \
--to=david@gibson.dropbear.id.au \
--cc=passt-dev@passt.top \
--cc=pholzing@redhat.com \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).