[PATCH v27 2/2] test: Add migration tests

[Stefano Brivio <sbrivio@redhat.com>]

PCAP=1 ./run migrate/bidirectional gives an overview of how the
whole thing is working.

Add 12 tests in total, checking basic functionality with and without
flows in both directions, with and without sockets in half-closed
states (both inbound and outbound), migration behaviour under traffic
flood, under traffic flood with > 253 flows, and strict checking of
sequences under flood with ramp patterns in both directions.

These tests need preparation and teardown for each case, as we need
to restore the source guest in its own context and pane before we can
test again. Eventually, we could consider alternating source and
target so that we don't need to restart from scratch every time, but
that's beyond the scope of this initial test implementation.

Trick: './run migrate/*' runs all the tests with preparation and
teardown steps.

Co-authored-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
---
 test/lib/layout                |  55 ++++++++++++-
 test/lib/setup                 | 138 ++++++++++++++++++++++++++++++++-
 test/lib/test                  |  48 ++++++++++++
 test/migrate/basic             |  59 ++++++++++++++
 test/migrate/basic_fin         |  62 +++++++++++++++
 test/migrate/bidirectional     |  64 +++++++++++++++
 test/migrate/bidirectional_fin |  64 +++++++++++++++
 test/migrate/iperf3_bidir6     |  58 ++++++++++++++
 test/migrate/iperf3_in4        |  50 ++++++++++++
 test/migrate/iperf3_in6        |  58 ++++++++++++++
 test/migrate/iperf3_many_out6  |  60 ++++++++++++++
 test/migrate/iperf3_out4       |  47 +++++++++++
 test/migrate/iperf3_out6       |  58 ++++++++++++++
 test/migrate/rampstream_in     |  12 +--
 test/migrate/rampstream_out    |   8 +-
 test/run                       |  42 +++++++++-
 16 files changed, 870 insertions(+), 13 deletions(-)
 create mode 100644 test/migrate/basic
 create mode 100644 test/migrate/basic_fin
 create mode 100644 test/migrate/bidirectional
 create mode 100644 test/migrate/bidirectional_fin
 create mode 100644 test/migrate/iperf3_bidir6
 create mode 100644 test/migrate/iperf3_in4
 create mode 100644 test/migrate/iperf3_in6
 create mode 100644 test/migrate/iperf3_many_out6
 create mode 100644 test/migrate/iperf3_out4
 create mode 100644 test/migrate/iperf3_out6

diff --git a/test/lib/layout b/test/lib/layout
index 4d03572..fddcdc4 100644
--- a/test/lib/layout
+++ b/test/lib/layout
@@ -134,6 +134,54 @@ layout_two_guests() {
 
 	get_info_cols
 
+	pane_watch_contexts ${PANE_GUEST_1} "guest #1 in namespace #1" qemu_1 guest_1
+	pane_watch_contexts ${PANE_GUEST_2} "guest #2 in namespace #1" qemu_2 guest_2
+
+	tmux send-keys -l -t ${PANE_INFO} 'while cat '"$STATEBASE/log_pipe"'; do :; done'
+	tmux send-keys -t ${PANE_INFO} -N 100 C-m
+	tmux select-pane -t ${PANE_INFO} -T "test log"
+
+	pane_watch_contexts ${PANE_HOST} host host
+	pane_watch_contexts ${PANE_PASST_1} "passt #1 in namespace #1" pasta_1 passt_1
+	pane_watch_contexts ${PANE_PASST_2} "passt #2 in namespace #1" pasta_1 passt_2
+
+	info_layout "two guests, two passt instances, in namespaces"
+
+	sleep 1
+}
+
+# layout_migrate() - Two guest panes, two passt panes, two passt-repair panes,
+#		     plus host and log
+layout_migrate() {
+	sleep 1
+
+	tmux kill-pane -a -t 0
+	cmd_write 0 clear
+
+	tmux split-window -v -t passt_test
+	tmux split-window -h -l '33%'
+	tmux split-window -h -t passt_test:1.1
+
+	tmux split-window -h -l '35%' -t passt_test:1.0
+	tmux split-window -v -t passt_test:1.0
+
+	tmux split-window -v -t passt_test:1.4
+	tmux split-window -v -t passt_test:1.6
+
+	tmux split-window -v -t passt_test:1.3
+
+	PANE_GUEST_1=0
+	PANE_GUEST_2=1
+	PANE_INFO=2
+	PANE_MON=3
+	PANE_HOST=4
+	PANE_PASST_REPAIR_1=5
+	PANE_PASST_1=6
+	PANE_PASST_REPAIR_2=7
+	PANE_PASST_2=8
+
+	get_info_cols
+
 	pane_watch_contexts ${PANE_GUEST_1} "guest #1 in namespace #1" qemu_1 guest_1
 	pane_watch_contexts ${PANE_GUEST_2} "guest #2 in namespace #2" qemu_2 guest_2
 
@@ -141,11 +189,16 @@ layout_two_guests() {
 	tmux send-keys -t ${PANE_INFO} -N 100 C-m
 	tmux select-pane -t ${PANE_INFO} -T "test log"
 
+	pane_watch_contexts ${PANE_MON} "QEMU monitor" mon mon
+
 	pane_watch_contexts ${PANE_HOST} host host
+	pane_watch_contexts ${PANE_PASST_REPAIR_1} "passt-repair #1 in namespace #1" repair_1 passt_repair_1
 	pane_watch_contexts ${PANE_PASST_1} "passt #1 in namespace #1" pasta_1 passt_1
+
+	pane_watch_contexts ${PANE_PASST_REPAIR_2} "passt-repair #2 in namespace #2" repair_2 passt_repair_2
 	pane_watch_contexts ${PANE_PASST_2} "passt #2 in namespace #2" pasta_2 passt_2
 
-	info_layout "two guests, two passt instances, in namespaces"
+	info_layout "two guests, two passt + passt-repair instances, in namespaces"
 
 	sleep 1
 }
diff --git a/test/lib/setup b/test/lib/setup
index ee67152..575bc21 100755
--- a/test/lib/setup
+++ b/test/lib/setup
@@ -305,6 +305,117 @@ setup_two_guests() {
 	context_setup_guest guest_2 ${GUEST_2_CID}
 }
 
+# setup_migrate() - Set up two namespace, run qemu, passt/passt-repair in both
+setup_migrate() {
+	context_setup_host host
+	context_setup_host mon
+	context_setup_host pasta_1
+	context_setup_host pasta_2
+
+	layout_migrate
+
+	# Ports:
+	#
+	#         guest #1  |  guest #2 |   ns #1   |    host
+	#         --------- |-----------|-----------|------------
+	#  10001  as server |           | to guest  |  to ns #1
+	#  10002            |           | as server |  to ns #1
+	#  10003            |           |  to init  |  as server
+	#  10004            | as server | to guest  |  to ns #1
+
+	__opts=
+	[ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/pasta_1.pcap"
+	[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
+	[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
+
+	__map_host4=192.0.2.1
+	__map_host6=2001:db8:9a55::1
+	__map_ns4=192.0.2.2
+	__map_ns6=2001:db8:9a55::2
+
+	# Option 1: send stuff via spliced path in pasta
+	# context_run_bg pasta_1 "./pasta ${__opts} -P ${STATESETUP}/pasta_1.pid -t 10001,10002 -T 10003 -u 10001,10002 -U 10003 --config-net ${NSTOOL} hold ${STATESETUP}/ns1.hold"
+	# Option 2: send stuff via tap (--map-guest-addr) instead (useful to see capture of full migration)
+	context_run_bg pasta_1 "./pasta ${__opts} -P ${STATESETUP}/pasta_1.pid -t 10001,10002,10004 -T 10003 -u 10001,10002,10004 -U 10003 --map-guest-addr ${__map_host4} --map-guest-addr ${__map_host6} --config-net ${NSTOOL} hold ${STATESETUP}/ns1.hold"
+	context_setup_nstool passt_1 ${STATESETUP}/ns1.hold
+	context_setup_nstool passt_repair_1 ${STATESETUP}/ns1.hold
+
+	context_setup_nstool passt_2 ${STATESETUP}/ns1.hold
+	context_setup_nstool passt_repair_2 ${STATESETUP}/ns1.hold
+
+	context_setup_nstool qemu_1 ${STATESETUP}/ns1.hold
+	context_setup_nstool qemu_2 ${STATESETUP}/ns1.hold
+
+	__ifname="$(context_run qemu_1 "ip -j link show | jq -rM '.[] | select(.link_type == \"ether\").ifname'")"
+
+	sleep 1
+
+	__opts="--vhost-user"
+	[ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/passt_1.pcap"
+	[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
+	[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
+
+	context_run_bg passt_1 "./passt -s ${STATESETUP}/passt_1.socket -P ${STATESETUP}/passt_1.pid -f ${__opts} -t 10001 -u 10001"
+	wait_for [ -f "${STATESETUP}/passt_1.pid" ]
+
+	context_run_bg passt_repair_1 "./passt-repair ${STATESETUP}/passt_1.socket.repair"
+
+	__opts="--vhost-user"
+	[ ${PCAP} -eq 1 ] && __opts="${__opts} -p ${LOGDIR}/passt_2.pcap"
+	[ ${DEBUG} -eq 1 ] && __opts="${__opts} -d"
+	[ ${TRACE} -eq 1 ] && __opts="${__opts} --trace"
+
+	context_run_bg passt_2 "./passt -s ${STATESETUP}/passt_2.socket -P ${STATESETUP}/passt_2.pid -f ${__opts} -t 10004 -u 10004"
+	wait_for [ -f "${STATESETUP}/passt_2.pid" ]
+
+	context_run_bg passt_repair_2 "./passt-repair ${STATESETUP}/passt_2.socket.repair"
+
+	__vmem="512M"	# Keep migration fast
+	__qemu_netdev1="					       \
+		-chardev socket,id=c,path=${STATESETUP}/passt_1.socket \
+		-netdev vhost-user,id=v,chardev=c		       \
+		-device virtio-net,netdev=v			       \
+		-object memory-backend-memfd,id=m,share=on,size=${__vmem} \
+		-numa node,memdev=m"
+	__qemu_netdev2="					       \
+		-chardev socket,id=c,path=${STATESETUP}/passt_2.socket \
+		-netdev vhost-user,id=v,chardev=c		       \
+		-device virtio-net,netdev=v			       \
+		-object memory-backend-memfd,id=m,share=on,size=${__vmem} \
+		-numa node,memdev=m"
+
+	GUEST_1_CID=94557
+	context_run_bg qemu_1 'qemu-system-'"${QEMU_ARCH}"		     \
+		' -M accel=kvm:tcg'                                          \
+		' -m '${__vmem}' -cpu host -smp '${VCPUS}		     \
+		' -kernel '"${KERNEL}"					     \
+		' -initrd '${INITRAMFS}' -nographic -serial stdio'	     \
+		' -nodefaults'						     \
+		' -append "console=ttyS0 mitigations=off apparmor=0" '	     \
+		" ${__qemu_netdev1}"					     \
+		" -pidfile ${STATESETUP}/qemu_1.pid"			     \
+		" -device vhost-vsock-pci,guest-cid=$GUEST_1_CID"	     \
+		" -monitor unix:${STATESETUP}/qemu_1_mon.sock,server,nowait"
+
+	GUEST_2_CID=94558
+	context_run_bg qemu_2 'qemu-system-'"${QEMU_ARCH}"		     \
+		' -M accel=kvm:tcg'                                          \
+		' -m '${__vmem}' -cpu host -smp '${VCPUS}		     \
+		' -kernel '"${KERNEL}"					     \
+		' -initrd '${INITRAMFS}' -nographic -serial stdio'	     \
+		' -nodefaults'						     \
+		' -append "console=ttyS0 mitigations=off apparmor=0" '	     \
+		" ${__qemu_netdev2}"					     \
+		" -pidfile ${STATESETUP}/qemu_2.pid"			     \
+		" -device vhost-vsock-pci,guest-cid=$GUEST_2_CID"	     \
+		" -monitor unix:${STATESETUP}/qemu_2_mon.sock,server,nowait" \
+		" -incoming tcp:0:20005"
+
+	context_setup_guest guest_1 ${GUEST_1_CID}
+	# Only available after migration:
+	( context_setup_guest guest_2 ${GUEST_2_CID} & )
+}
+
 # teardown_context_watch() - Remove contexts and stop panes watching them
 # $1:	Pane number watching
 # $@:	Context names
@@ -375,7 +486,8 @@ teardown_two_guests() {
 	context_wait pasta_1
 	context_wait pasta_2
 
-	rm -f "${STATESETUP}/passt__[12].pid" "${STATESETUP}/pasta_[12].pid"
+	rm "${STATESETUP}/passt_1.pid" "${STATESETUP}/passt_2.pid"
+	rm "${STATESETUP}/pasta_1.pid" "${STATESETUP}/pasta_2.pid"
 
 	teardown_context_watch ${PANE_HOST} host
 	teardown_context_watch ${PANE_GUEST_1} qemu_1 guest_1
@@ -384,6 +496,30 @@ teardown_two_guests() {
 	teardown_context_watch ${PANE_PASST_2} pasta_2 passt_2
 }
 
+# teardown_migrate() - Exit namespaces, kill qemu processes, passt and pasta
+teardown_migrate() {
+	${NSTOOL} exec ${STATESETUP}/ns1.hold -- kill $(cat "${STATESETUP}/qemu_1.pid")
+	${NSTOOL} exec ${STATESETUP}/ns1.hold -- kill $(cat "${STATESETUP}/qemu_2.pid")
+	context_wait qemu_1
+	context_wait qemu_2
+
+	${NSTOOL} exec ${STATESETUP}/ns1.hold -- kill $(cat "${STATESETUP}/passt_2.pid")
+	context_wait passt_1
+	context_wait passt_2
+	${NSTOOL} stop "${STATESETUP}/ns1.hold"
+	context_wait pasta_1
+
+	rm -f "${STATESETUP}/passt_1.pid" "${STATESETUP}/passt_2.pid"
+	rm -f "${STATESETUP}/pasta_1.pid" "${STATESETUP}/pasta_2.pid"
+
+	teardown_context_watch ${PANE_HOST} host
+
+	teardown_context_watch ${PANE_GUEST_1} qemu_1 guest_1
+	teardown_context_watch ${PANE_GUEST_2} qemu_2 guest_2
+	teardown_context_watch ${PANE_PASST_1} pasta_1 passt_1
+	teardown_context_watch ${PANE_PASST_2} pasta_1 passt_2
+}
+
 # teardown_demo_passt() - Exit namespace, kill qemu, passt and pasta
 teardown_demo_passt() {
 	tmux send-keys -t ${PANE_GUEST} "C-c"
diff --git a/test/lib/test b/test/lib/test
index e6726be..758250a 100755
--- a/test/lib/test
+++ b/test/lib/test
@@ -68,6 +68,45 @@ test_iperf3() {
 	TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}" "__${__var}__" "${__bw}" )"
 }
 
+# test_iperf3m() - Ugly helper for iperf3 directive, guest migration variant
+# $1:	Variable name: to put the measure bandwidth into
+# $2:	Initial source/client context
+# $3:	Second source/client context the guest is moving to
+# $4:	Destination name or address for client
+# $5:	Port number, ${i} is translated to process index
+# $6:	Run time, in seconds
+# $7:	Client options
+test_iperf3m() {
+	__var="${1}"; shift
+	__cctx="${1}"; shift
+	__cctx2="${1}"; shift
+	__dest="${1}"; shift
+	__port="${1}"; shift
+	__time="${1}"; shift
+
+	pane_or_context_run "${__cctx}" 'rm -f c.json'
+
+        # A 1s wait for connection on what's basically a local link
+        # indicates something is pretty wrong
+        __timeout=1000
+	pane_or_context_run_bg "${__cctx}" 				\
+		 'iperf3 -J -c '${__dest}' -p '${__port}		\
+		 '	 --connect-timeout '${__timeout}		\
+		 '	 -t'${__time}' -i0 '"${@}"' > c.json'		\
+
+	__jval=".end.sum_received.bits_per_second"
+
+	sleep $((${__time} + 3))
+
+	pane_or_context_output "${__cctx2}"				\
+		 'cat c.json'
+
+	__bw=$(pane_or_context_output "${__cctx2}"			\
+		 'cat c.json | jq -rMs "map('${__jval}') | add"')
+
+	TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}" "__${__var}__" "${__bw}" )"
+}
+
 test_one_line() {
 	__line="${1}"
 
@@ -177,6 +216,12 @@ test_one_line() {
 	"guest2w")
 		pane_or_context_wait guest_2 || TEST_ONE_nok=1
 		;;
+	"mon")
+		pane_or_context_run mon "${__arg}" || TEST_ONE_nok=1
+		;;
+	"monb")
+		pane_or_context_run_bg mon "${__arg}"
+		;;
 	"ns")
 		pane_or_context_run ns "${__arg}" || TEST_ONE_nok=1
 		;;
@@ -292,6 +337,9 @@ test_one_line() {
 	"iperf3")
 		test_iperf3 ${__arg}
 		;;
+	"iperf3m")
+		test_iperf3m ${__arg}
+		;;
 	"set")
 		TEST_ONE_subs="$(list_add_pair "${TEST_ONE_subs}" "__${__arg%% *}__" "${__arg#* }")"
 		;;
diff --git a/test/migrate/basic b/test/migrate/basic
new file mode 100644
index 0000000..3f11f7d
--- /dev/null
+++ b/test/migrate/basic
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/basic - Check basic migration functionality
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and .deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv4: guest1/guest2 > host
+g1out	GW1 ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
+hostb	socat -u TCP4-LISTEN:10006 OPEN:__STATESETUP__/msg,create,trunc
+sleep	1
+# Option 1: via spliced path in pasta, namespace to host
+# guest1b	{ printf "Hello from guest 1"; sleep 10; printf " and from guest 2\n"; } | socat -u STDIN TCP4:__GW1__:10003
+# Option 2: via --map-guest-addr (tap) in pasta, namespace to host
+guest1b	{ printf "Hello from guest 1"; sleep 3; printf " and from guest 2\n"; } | socat -u STDIN TCP4:__MAP_HOST4__:10006
+sleep	1
+
+mon	echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+hostw
+hout	MSG cat __STATESETUP__/msg
+check	[ "__MSG__" = "Hello from guest 1 and from guest 2" ]
diff --git a/test/migrate/basic_fin b/test/migrate/basic_fin
new file mode 100644
index 0000000..aa61ec5
--- /dev/null
+++ b/test/migrate/basic_fin
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/basic_fin - Outbound traffic across migration, half-closed socket
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and .deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv4: guest1, half-close, guest2 > host
+g1out	GW1 ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
+
+hostb	echo FIN | socat TCP4-LISTEN:10006,shut-down STDIO,ignoreeof > __STATESETUP__/msg
+#hostb	socat -u TCP4-LISTEN:10006 OPEN:__STATESETUP__/msg,create,trunc
+
+#sleep	20
+# Option 1: via spliced path in pasta, namespace to host
+# guest1b	{ printf "Hello from guest 1"; sleep 10; printf " and from guest 2\n"; } | socat -u STDIN TCP4:__GW1__:10003
+# Option 2: via --map-guest-addr (tap) in pasta, namespace to host
+guest1b	{ printf "Hello from guest 1"; sleep 3; printf " and from guest 2\n"; } | socat -u STDIN TCP4:__MAP_HOST4__:10006
+sleep	1
+
+mon	echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+hostw
+hout	MSG cat __STATESETUP__/msg
+check	[ "__MSG__" = "Hello from guest 1 and from guest 2" ]
diff --git a/test/migrate/bidirectional b/test/migrate/bidirectional
new file mode 100644
index 0000000..4c04081
--- /dev/null
+++ b/test/migrate/bidirectional
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/bidirectional - Check migration with messages in both directions
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	TCP/IPv4: guest1/guest2 > host, host > guest1/guest2
+g1out	GW1 ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
+
+hostb	socat -u TCP4-LISTEN:10006 OPEN:__STATESETUP__/msg,create,trunc
+guest1b	socat -u TCP4-LISTEN:10001 OPEN:msg,create,trunc
+sleep	1
+
+guest1b	socat -u UNIX-RECV:proxy.sock,null-eof TCP4:__MAP_HOST4__:10006
+hostb	socat -u UNIX-RECV:__STATESETUP__/proxy.sock,null-eof TCP4:__ADDR1__:10001
+sleep	1
+guest1	printf "Hello from guest 1" | socat -u STDIN UNIX:proxy.sock
+host	printf "Dear guest 1," | socat -u STDIN UNIX:__STATESETUP__/proxy.sock
+sleep	1
+
+mon	echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+sleep	2
+guest2	printf " and from guest 2" | socat -u STDIN UNIX:proxy.sock,shut-null
+host	printf " you are now guest 2" | socat -u STDIN UNIX:__STATESETUP__/proxy.sock,shut-null
+
+hostw
+# FIXME: guest2w doesn't work here because shell jobs are (also) from guest #1,
+# use sleep 1 for the moment
+sleep	1
+
+hout	MSG cat __STATESETUP__/msg
+check	[ "__MSG__" = "Hello from guest 1 and from guest 2" ]
+
+g2out	MSG cat msg
+check	[ "__MSG__" = "Dear guest 1, you are now guest 2" ]
diff --git a/test/migrate/bidirectional_fin b/test/migrate/bidirectional_fin
new file mode 100644
index 0000000..1c13527
--- /dev/null
+++ b/test/migrate/bidirectional_fin
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/bidirectional_fin - Both directions, half-closed sockets
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	TCP/IPv4: guest1/guest2 <- (half closed) -> host
+g1out	GW1 ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
+
+hostb	echo FIN | socat TCP4-LISTEN:10006,shut-down STDIO,ignoreeof > __STATESETUP__/msg
+guest1b	echo FIN | socat TCP4-LISTEN:10001,shut-down STDIO,ignoreeof > msg
+sleep	1
+
+guest1b	socat -u UNIX-RECV:proxy.sock,null-eof TCP4:__MAP_HOST4__:10006
+hostb	socat -u UNIX-RECV:__STATESETUP__/proxy.sock,null-eof TCP4:__ADDR1__:10001
+sleep	1
+guest1	printf "Hello from guest 1" | socat -u STDIN UNIX:proxy.sock
+host	printf "Dear guest 1," | socat -u STDIN UNIX:__STATESETUP__/proxy.sock
+sleep	1
+
+mon	echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+sleep	2
+guest2	printf " and from guest 2" | socat -u STDIN UNIX:proxy.sock,shut-null
+host	printf " you are now guest 2" | socat -u STDIN UNIX:__STATESETUP__/proxy.sock,shut-null
+
+hostw
+# FIXME: guest2w doesn't work here because shell jobs are (also) from guest #1,
+# use sleep 1 for the moment
+sleep	1
+
+hout	MSG cat __STATESETUP__/msg
+check	[ "__MSG__" = "Hello from guest 1 and from guest 2" ]
+
+g2out	MSG cat msg
+check	[ "__MSG__" = "Dear guest 1, you are now guest 2" ]
diff --git a/test/migrate/iperf3_bidir6 b/test/migrate/iperf3_bidir6
new file mode 100644
index 0000000..4bfefb5
--- /dev/null
+++ b/test/migrate/iperf3_bidir6
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_bidir6 - Migration behaviour with many bidirectional flows
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+set	THREADS 128
+set	TIME 3
+set	OMIT 0.1
+set	OPTS -Z -P __THREADS__ -O__OMIT__ -N --bidir
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and .deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv6 host <-> guest flood, many flows, during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST6__ 10006 __TIME__ __OPTS__
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/iperf3_in4 b/test/migrate/iperf3_in4
new file mode 100644
index 0000000..c5f3916
--- /dev/null
+++ b/test/migrate/iperf3_in4
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_in4 - Migration behaviour under inbound IPv4 flood
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+guest1	/sbin/sysctl -w net.core.rmem_max=33554432
+guest1	/sbin/sysctl -w net.core.wmem_max=33554432
+
+set	THREADS 1
+set	TIME 4
+set	OMIT 0.1
+set	OPTS -Z -P __THREADS__ -O__OMIT__ -N -R
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	TCP/IPv4 host to guest throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST4__ 10006 __TIME__ __OPTS__
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/iperf3_in6 b/test/migrate/iperf3_in6
new file mode 100644
index 0000000..16cf504
--- /dev/null
+++ b/test/migrate/iperf3_in6
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_in6 - Migration behaviour under inbound IPv6 flood
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+set	THREADS 4
+set	TIME 3
+set	OMIT 0.1
+set	OPTS -Z -P __THREADS__ -O__OMIT__ -N -R
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and .deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv6 host to guest throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST6__ 10006 __TIME__ __OPTS__
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/iperf3_many_out6 b/test/migrate/iperf3_many_out6
new file mode 100644
index 0000000..88133f2
--- /dev/null
+++ b/test/migrate/iperf3_many_out6
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_many_out6 - Migration behaviour with many outbound flows
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+set	THREADS 16
+set	TIME 3
+set	OMIT 0.1
+set	OPTS -Z -P __THREADS__ -O__OMIT__ -N -l 1M
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and .deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv6 guest to host flood, many flows, during migration
+
+test	TCP/IPv6 host to guest throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST6__ 10006 __TIME__ __OPTS__
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/iperf3_out4 b/test/migrate/iperf3_out4
new file mode 100644
index 0000000..968057b
--- /dev/null
+++ b/test/migrate/iperf3_out4
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_out4 - Migration behaviour under outbound IPv4 flood
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+set	THREADS 6
+set	TIME 2
+set	OMIT 0.1
+set	OPTS -P __THREADS__ -O__OMIT__ -Z -N -l 1M
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	TCP/IPv4 guest to host throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST4__ 10006 __TIME__ __OPTS__
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/iperf3_out6 b/test/migrate/iperf3_out6
new file mode 100644
index 0000000..21fbfcd
--- /dev/null
+++ b/test/migrate/iperf3_out6
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/migrate/iperf3_out6 - Migration behaviour under outbound IPv6 flood
+#
+# Copyright (c) 2025 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+g1tools	ip jq dhclient socat cat
+htools	ip jq
+
+set	MAP_HOST4 192.0.2.1
+set	MAP_HOST6 2001:db8:9a55::1
+set	MAP_NS4 192.0.2.2
+set	MAP_NS6 2001:db8:9a55::2
+
+set	THREADS 6
+set	TIME 2
+set	OMIT 0.1
+set	OPTS -P __THREADS__ -O__OMIT__ -Z -N -l 1M
+
+test	Interface name
+g1out	IFNAME1 ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
+hout	HOST_IFNAME ip -j -4 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+hout	HOST_IFNAME6 ip -j -6 route show|jq -rM '[.[] | select(.dst == "default").dev] | .[0]'
+check	[ -n "__IFNAME1__" ]
+
+test	DHCP: address
+guest1	ip link set dev __IFNAME1__ up
+guest1	/sbin/dhclient -4 __IFNAME1__
+g1out	ADDR1 ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME1__").addr_info[0].local'
+hout	HOST_ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__HOST_IFNAME__").addr_info[0].local'
+check	[ "__ADDR1__" = "__HOST_ADDR__" ]
+
+test	DHCPv6: address
+# Link is up now, wait for DAD to complete
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+guest1	/sbin/dhclient -6 __IFNAME1__
+# Wait for DAD to complete on the DHCP address
+guest1	while ip -j -6 addr show tentative | jq -e '.[].addr_info'; do sleep 0.1; done
+g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__IFNAME1__").addr_info[] | select(.prefixlen == 128).local] | .[0]'
+hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and .deprecated != true).local] | .[0]'
+check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
+
+test	TCP/IPv6 guest to host throughput during migration
+
+monb	sleep 1; echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+
+iperf3s	host 10006
+iperf3m	BW guest_1 guest_2 __MAP_HOST6__ 10006 __TIME__ __OPTS__
+bw	__BW__ 1 2
+
+iperf3k	host
diff --git a/test/migrate/rampstream_in b/test/migrate/rampstream_in
index 46f4143..df333ba 100644
--- a/test/migrate/rampstream_in
+++ b/test/migrate/rampstream_in
@@ -6,10 +6,10 @@
 # PASTA - Pack A Subtle Tap Abstraction
 #  for network namespace/tap device mode
 #
-# test/migrate/basic - Check basic migration functionality
+# test/migrate/rampstream_in - Check sequence correctness with inbound ramp
 #
-# Copyright (c) 2025 Red Hat GmbH
-# Author: Stefano Brivio <sbrivio@redhat.com>
+# Copyright (c) 2025 Red Hat
+# Author: David Gibson <david@gibson.dropbear.id.au>
 
 g1tools	ip jq dhclient socat cat
 htools	ip jq
@@ -43,15 +43,15 @@ g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__IFNAME1__")
 hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and .deprecated != true).local] | .[0]'
 check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
 
-test	TCP/IPv4: host > guest
+test	TCP/IPv4: sequence check, ramps, inbound
 g1out	GW1 ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
 guest1b	socat -u TCP4-LISTEN:10001 EXEC:"rampstream-check.sh __RAMPS__"
 sleep	1
 hostb	socat -u EXEC:"test/rampstream send __RAMPS__" TCP4:__ADDR1__:10001
 
-sleep 1
+sleep	1
 
-#mon	echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
+monb	echo "migrate tcp:0:20005" | socat -u STDIN UNIX:__STATESETUP__/qemu_1_mon.sock
 
 hostw
 
diff --git a/test/migrate/rampstream_out b/test/migrate/rampstream_out
index 91b9c63..8ed3229 100644
--- a/test/migrate/rampstream_out
+++ b/test/migrate/rampstream_out
@@ -6,10 +6,10 @@
 # PASTA - Pack A Subtle Tap Abstraction
 #  for network namespace/tap device mode
 #
-# test/migrate/basic - Check basic migration functionality
+# test/migrate/rampstream_out - Check sequence correctness with outbound ramp
 #
-# Copyright (c) 2025 Red Hat GmbH
-# Author: Stefano Brivio <sbrivio@redhat.com>
+# Copyright (c) 2025 Red Hat
+# Author: David Gibson <david@gibson.dropbear.id.au>
 
 g1tools	ip jq dhclient socat cat
 htools	ip jq
@@ -43,7 +43,7 @@ g1out	ADDR1_6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__IFNAME1__")
 hout	HOST_ADDR6 ip -j -6 addr show|jq -rM '[.[] | select(.ifname == "__HOST_IFNAME6__").addr_info[] | select(.scope == "global" and .deprecated != true).local] | .[0]'
 check	[ "__ADDR1_6__" = "__HOST_ADDR6__" ]
 
-test	TCP/IPv4: guest > host
+test	TCP/IPv4: sequence check, ramps, outbound
 g1out	GW1 ip -j -4 route show|jq -rM '.[] | select(.dst == "default").gateway'
 hostb	socat -u TCP4-LISTEN:10006 EXEC:"test/rampstream check __RAMPS__"
 sleep	1
diff --git a/test/run b/test/run
index f188d8e..4e86f30 100755
--- a/test/run
+++ b/test/run
@@ -130,6 +130,43 @@ run() {
 	test two_guests_vu/basic
 	teardown two_guests
 
+	setup migrate
+	test migrate/basic
+	teardown migrate
+	setup migrate
+	test migrate/basic_fin
+	teardown migrate
+	setup migrate
+	test migrate/bidirectional
+	teardown migrate
+	setup migrate
+	test migrate/bidirectional_fin
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_out4
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_out6
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_in4
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_in6
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_bidir6
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_many_out6
+	teardown migrate
+	setup migrate
+	test migrate/rampstream_in
+	teardown migrate
+	setup migrate
+	test migrate/rampstream_out
+	teardown migrate
+
 	VALGRIND=0
 	VHOST_USER=0
 	setup passt_in_ns
@@ -186,7 +223,10 @@ run_selected() {
 
 	__setup=
 	for __test; do
-		if [ "${__test%%/*}" != "${__setup}" ]; then
+		# HACK: the migrate tests need the setup repeated for
+		#       each test
+		if [ "${__test%%/*}" != "${__setup}" -o		\
+		     "${__test%%/*}" = "migrate" ]; then
 			[ -n "${__setup}" ] && teardown "${__setup}"
 			__setup="${__test%%/*}"
 			setup "${__setup}"
-- 
@@ -130,6 +130,43 @@ run() {
 	test two_guests_vu/basic
 	teardown two_guests
 
+	setup migrate
+	test migrate/basic
+	teardown migrate
+	setup migrate
+	test migrate/basic_fin
+	teardown migrate
+	setup migrate
+	test migrate/bidirectional
+	teardown migrate
+	setup migrate
+	test migrate/bidirectional_fin
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_out4
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_out6
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_in4
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_in6
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_bidir6
+	teardown migrate
+	setup migrate
+	test migrate/iperf3_many_out6
+	teardown migrate
+	setup migrate
+	test migrate/rampstream_in
+	teardown migrate
+	setup migrate
+	test migrate/rampstream_out
+	teardown migrate
+
 	VALGRIND=0
 	VHOST_USER=0
 	setup passt_in_ns
@@ -186,7 +223,10 @@ run_selected() {
 
 	__setup=
 	for __test; do
-		if [ "${__test%%/*}" != "${__setup}" ]; then
+		# HACK: the migrate tests need the setup repeated for
+		#       each test
+		if [ "${__test%%/*}" != "${__setup}" -o		\
+		     "${__test%%/*}" = "migrate" ]; then
 			[ -n "${__setup}" ] && teardown "${__setup}"
 			__setup="${__test%%/*}"
 			setup "${__setup}"
-- 
2.43.0