From: Jon Maloy <jmaloy@redhat.com>
To: sbrivio@redhat.com, dgibson@redhat.com,
david@gibson.dropbear.id.au, jmaloy@redhat.com,
passt-dev@passt.top
Subject: [PATCH v6 07/13] ip: refactor function pasta_ns_conf()
Date: Sat, 21 Mar 2026 20:43:27 -0400 [thread overview]
Message-ID: <20260322004333.365713-8-jmaloy@redhat.com> (raw)
In-Reply-To: <20260322004333.365713-1-jmaloy@redhat.com>
After the previous changes in this series it becomes possible
to simplify the pasta_ns_conf() function.
We extract address and route configuration into helper functions
pasta_conf_addrs() and pasta_conf_routes(), reducing nesting
and improving readability.
To allow pasta_conf_addrs() to handle both address families
uniformly, we change nl_addr_set() to take a union inany_addr pointer
instead of void pointer, moving the address family handling into
the function itself.
We also fix a bug where the IPv6 code path incorrectly wrote to
req.set.a4.rta_l.rta_type instead of req.set.a6.rta_l.rta_type.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
---
netlink.c | 13 +--
netlink.h | 2 +-
pasta.c | 232 +++++++++++++++++++++++++++---------------------------
3 files changed, 124 insertions(+), 123 deletions(-)
diff --git a/netlink.c b/netlink.c
index 2727eec..fcdc983 100644
--- a/netlink.c
+++ b/netlink.c
@@ -870,7 +870,7 @@ int nl_addr_get_ll(int s, unsigned int ifi, struct in6_addr *addr)
* Return: 0 on success, negative error code on failure
*/
int nl_addr_set(int s, unsigned int ifi, sa_family_t af,
- const void *addr, int prefix_len)
+ const union inany_addr *addr, int prefix_len)
{
struct req_t {
struct nlmsghdr nlh;
@@ -905,21 +905,22 @@ int nl_addr_set(int s, unsigned int ifi, sa_family_t af,
len = offsetof(struct req_t, set.a6) + sizeof(req.set.a6);
- memcpy(&req.set.a6.l, addr, sizeof(req.set.a6.l));
+ memcpy(&req.set.a6.l, &addr->a6, sizeof(req.set.a6.l));
req.set.a6.rta_l.rta_len = rta_len;
- req.set.a4.rta_l.rta_type = IFA_LOCAL;
- memcpy(&req.set.a6.a, addr, sizeof(req.set.a6.a));
+ req.set.a6.rta_l.rta_type = IFA_LOCAL;
+ memcpy(&req.set.a6.a, &addr->a6, sizeof(req.set.a6.a));
req.set.a6.rta_a.rta_len = rta_len;
req.set.a6.rta_a.rta_type = IFA_ADDRESS;
} else {
+ const struct in_addr *v4 = inany_v4(addr);
size_t rta_len = RTA_LENGTH(sizeof(req.set.a4.l));
len = offsetof(struct req_t, set.a4) + sizeof(req.set.a4);
- memcpy(&req.set.a4.l, addr, sizeof(req.set.a4.l));
+ memcpy(&req.set.a4.l, v4, sizeof(req.set.a4.l));
req.set.a4.rta_l.rta_len = rta_len;
req.set.a4.rta_l.rta_type = IFA_LOCAL;
- memcpy(&req.set.a4.a, addr, sizeof(req.set.a4.a));
+ memcpy(&req.set.a4.a, v4, sizeof(req.set.a4.a));
req.set.a4.rta_a.rta_len = rta_len;
req.set.a4.rta_a.rta_type = IFA_ADDRESS;
}
diff --git a/netlink.h b/netlink.h
index 3af6d58..26f5ef7 100644
--- a/netlink.h
+++ b/netlink.h
@@ -23,7 +23,7 @@ int nl_addr_get_all(struct ctx *c, int s, unsigned int ifi, sa_family_t af);
bool nl_neigh_mac_get(int s, const union inany_addr *addr, int ifi,
unsigned char *mac);
int nl_addr_set(int s, unsigned int ifi, sa_family_t af,
- const void *addr, int prefix_len);
+ const union inany_addr *addr, int prefix_len);
int nl_addr_get_ll(int s, unsigned int ifi, struct in6_addr *addr);
int nl_addr_set_ll_nodad(int s, unsigned int ifi);
int nl_addr_dup(int s_src, unsigned int ifi_src,
diff --git a/pasta.c b/pasta.c
index 6307c65..b8d7cf4 100644
--- a/pasta.c
+++ b/pasta.c
@@ -46,6 +46,7 @@
#include "util.h"
#include "passt.h"
+#include "conf.h"
#include "isolation.h"
#include "netlink.h"
#include "log.h"
@@ -303,13 +304,73 @@ void pasta_start_ns(struct ctx *c, uid_t uid, gid_t gid,
die_perror("Failed to join network namespace");
}
+/**
+ * pasta_conf_addrs() - Configure addresses for one address family in namespace
+ * @c: Execution context
+ * @af: Address family (AF_INET or AF_INET6)
+ * @ifi: Host interface index for this address family
+ * @no_copy: If true, set addresses from c->addrs; if false, copy from host
+ *
+ * Return: 0 on success, negative error code on failure
+ */
+static int pasta_conf_addrs(struct ctx *c, sa_family_t af,
+ int ifi, bool no_copy)
+{
+ const struct guest_addr *a;
+
+ if (!ifi)
+ return 0;
+
+ if (!no_copy)
+ return nl_addr_dup(nl_sock, ifi, nl_sock_ns, c->pasta_ifi, af);
+
+ for_each_addr(a, c, af) {
+ int rc;
+
+ /* Skip link-local, kernel auto-configures */
+ if (a->flags & CONF_ADDR_LINKLOCAL)
+ continue;
+
+ rc = nl_addr_set(nl_sock_ns, c->pasta_ifi, af, &a->addr,
+ inany_prefix_len(a));
+ if (rc < 0)
+ return rc;
+ }
+ return 0;
+}
+
+/**
+ * pasta_conf_routes() - Configure routes for one address family in namespace
+ * @c: Execution context
+ * @af: Address family (AF_INET or AF_INET6)
+ * @ifi: Host interface index for this address family
+ * @no_copy: If true, set default route; if false, copy routes from host
+ *
+ * Return: 0 on success, negative error code on failure
+ */
+static int pasta_conf_routes(struct ctx *c, sa_family_t af, int ifi,
+ bool no_copy)
+{
+ const void *gw = (af == AF_INET) ?
+ (const void *)&c->ip4.guest_gw : (const void *)&c->ip6.guest_gw;
+
+ if (!ifi)
+ return 0;
+
+ if (no_copy)
+ return nl_route_set_def(nl_sock_ns, c->pasta_ifi, af, gw);
+
+ return nl_route_dup(nl_sock, ifi, nl_sock_ns, c->pasta_ifi, af);
+}
+
/**
* pasta_ns_conf() - Set up loopback and tap interfaces in namespace as needed
* @c: Execution context
*/
void pasta_ns_conf(struct ctx *c)
{
- int rc = 0;
+ unsigned int flags = IFF_UP;
+ int rc;
rc = nl_link_set_flags(nl_sock_ns, 1 /* lo */, IFF_UP, IFF_UP);
if (rc < 0)
@@ -328,123 +389,62 @@ void pasta_ns_conf(struct ctx *c)
die("Couldn't set MAC address in namespace: %s",
strerror_(-rc));
- if (c->pasta_conf_ns) {
- unsigned int flags = IFF_UP;
- const struct guest_addr *a;
-
- if (c->mtu)
- nl_link_set_mtu(nl_sock_ns, c->pasta_ifi, c->mtu);
-
- if (c->ifi6) /* Avoid duplicate address detection on link up */
- flags |= IFF_NOARP;
-
- nl_link_set_flags(nl_sock_ns, c->pasta_ifi, flags, flags);
-
- if (c->ifi4) {
- if (c->ip4.no_copy_addrs) {
- for_each_addr(a, c, AF_INET) {
- rc = nl_addr_set(nl_sock_ns,
- c->pasta_ifi, AF_INET,
- inany_v4(&a->addr),
- inany_prefix_len(a));
- if (rc < 0)
- break;
- }
- } else {
- rc = nl_addr_dup(nl_sock, c->ifi4,
- nl_sock_ns, c->pasta_ifi,
- AF_INET);
- }
-
- if (c->ifi4 == -1 && rc == -ENOTSUP) {
- warn("IPv4 not supported, disabling");
- c->ifi4 = 0;
- goto ipv4_done;
- }
-
- if (rc < 0) {
- die("Couldn't set IPv4 address(es) in namespace: %s",
- strerror_(-rc));
- }
-
- if (c->ip4.no_copy_routes) {
- rc = nl_route_set_def(nl_sock_ns, c->pasta_ifi,
- AF_INET,
- &c->ip4.guest_gw);
- } else {
- rc = nl_route_dup(nl_sock, c->ifi4, nl_sock_ns,
- c->pasta_ifi, AF_INET);
- }
-
- if (rc < 0) {
- die("Couldn't set IPv4 route(s) in guest: %s",
- strerror_(-rc));
- }
- }
-ipv4_done:
-
- if (c->ifi6) {
- rc = nl_addr_get_ll(nl_sock_ns, c->pasta_ifi,
- &c->ip6.addr_ll_seen);
- if (rc < 0) {
- warn("Can't get LL address from namespace: %s",
- strerror_(-rc));
- }
-
- rc = nl_addr_set_ll_nodad(nl_sock_ns, c->pasta_ifi);
- if (rc < 0) {
- warn("Can't set nodad for LL in namespace: %s",
- strerror_(-rc));
- }
-
- /* We dodged DAD: re-enable neighbour solicitations */
- nl_link_set_flags(nl_sock_ns, c->pasta_ifi,
- 0, IFF_NOARP);
-
- if (c->ip6.no_copy_addrs) {
- for_each_addr(a, c, AF_INET6) {
- rc = nl_addr_set(nl_sock_ns,
- c->pasta_ifi,
- AF_INET6, &a->addr.a6,
- a->prefix_len);
- if (rc < 0)
- break;
- }
- } else {
- rc = nl_addr_dup(nl_sock, c->ifi6,
- nl_sock_ns, c->pasta_ifi,
- AF_INET6);
- }
-
- if (rc < 0) {
- die("Couldn't set IPv6 address(es) in namespace: %s",
- strerror_(-rc));
- }
-
- if (c->ip6.no_copy_routes) {
- rc = nl_route_set_def(nl_sock_ns, c->pasta_ifi,
- AF_INET6,
- &c->ip6.guest_gw);
- } else {
- rc = nl_route_dup(nl_sock, c->ifi6,
- nl_sock_ns, c->pasta_ifi,
- AF_INET6);
- }
-
- if (c->ifi6 == -1 && rc == -ENOTSUP) {
- warn("IPv6 not supported, disabling");
- c->ifi6 = 0;
- goto ipv6_done;
- }
-
- if (rc < 0) {
- die("Couldn't set IPv6 route(s) in guest: %s",
- strerror_(-rc));
- }
- }
+ if (!c->pasta_conf_ns)
+ goto done;
+
+ if (c->mtu)
+ nl_link_set_mtu(nl_sock_ns, c->pasta_ifi, c->mtu);
+
+ if (c->ifi6) /* Avoid duplicate address detection on link up */
+ flags |= IFF_NOARP;
+
+ nl_link_set_flags(nl_sock_ns, c->pasta_ifi, flags, flags);
+
+ /* IPv4 configuration */
+ rc = pasta_conf_addrs(c, AF_INET, c->ifi4, c->ip4.no_copy_addrs);
+ if (c->ifi4 == -1 && rc == -ENOTSUP) {
+ warn("IPv4 not supported, disabling");
+ c->ifi4 = 0;
+ } else if (rc < 0) {
+ die("Couldn't set IPv4 address(es): %s", strerror_(-rc));
+ } else if (c->ifi4) {
+ rc = pasta_conf_routes(c, AF_INET, c->ifi4,
+ c->ip4.no_copy_routes);
+ if (rc < 0)
+ die("Couldn't set IPv4 route(s): %s", strerror_(-rc));
+ }
+
+ if (!c->ifi6)
+ goto done;
+
+ rc = nl_addr_get_ll(nl_sock_ns, c->pasta_ifi,
+ &c->ip6.addr_ll_seen);
+ if (rc < 0)
+ warn("Can't get LL address from namespace: %s",
+ strerror_(-rc));
+
+ rc = nl_addr_set_ll_nodad(nl_sock_ns, c->pasta_ifi);
+ if (rc < 0)
+ warn("Can't set nodad for LL in namespace: %s",
+ strerror_(-rc));
+
+ /* We dodged DAD: re-enable neighbour solicitations */
+ nl_link_set_flags(nl_sock_ns, c->pasta_ifi, 0, IFF_NOARP);
+
+ rc = pasta_conf_addrs(c, AF_INET6, c->ifi6, c->ip6.no_copy_addrs);
+ if (c->ifi6 == -1 && rc == -ENOTSUP) {
+ warn("IPv6 not supported, disabling");
+ c->ifi6 = 0;
+ } else if (rc < 0) {
+ die("Couldn't set IPv6 address(es): %s", strerror_(-rc));
+ } else {
+ rc = pasta_conf_routes(c, AF_INET6, c->ifi6,
+ c->ip6.no_copy_routes);
+ if (rc < 0)
+ die("Couldn't set IPv6 route(s): %s", strerror_(-rc));
}
-ipv6_done:
+done:
proto_update_l2_buf(c->guest_mac);
}
--
2.52.0
next prev parent reply other threads:[~2026-03-22 0:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-22 0:43 [PATCH v6 00/13] Introduce multiple addresses and late binding Jon Maloy
2026-03-22 0:43 ` [PATCH v6 01/13] conf: use a single buffer for print formatting in conf_print() Jon Maloy
2026-03-22 0:43 ` [PATCH v6 02/13] ip: Introduce unified multi-address data structures Jon Maloy
2026-03-22 0:43 ` [PATCH v6 03/13] fwd: Unify guest accessibility checks with unified address array Jon Maloy
2026-03-22 0:43 ` [PATCH v6 04/13] arp: Check all configured addresses in ARP filtering Jon Maloy
2026-03-22 0:43 ` [PATCH v6 05/13] conf: Allow multiple -a/--address options per address family Jon Maloy
2026-03-22 0:43 ` [PATCH v6 06/13] netlink, conf: Read all addresses from template interface at startup Jon Maloy
2026-03-22 0:43 ` Jon Maloy [this message]
2026-03-22 0:43 ` [PATCH v6 08/13] ip: Track observed guest IPv4 addresses in unified address array Jon Maloy
2026-03-22 0:43 ` [PATCH v6 09/13] ip: Track observed guest IPv6 " Jon Maloy
2026-03-22 0:43 ` [PATCH v6 10/13] migrate: Update protocol to v3 for multi-address support Jon Maloy
2026-03-22 0:43 ` [PATCH v6 11/13] dhcp: Select address for DHCP distribution Jon Maloy
2026-03-22 0:43 ` [PATCH v6 12/13] dhcpv6: Select addresses for DHCPv6 distribution Jon Maloy
2026-03-22 0:43 ` [PATCH v6 13/13] ndp: Support advertising multiple prefixes in Router Advertisements Jon Maloy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260322004333.365713-8-jmaloy@redhat.com \
--to=jmaloy@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=dgibson@redhat.com \
--cc=passt-dev@passt.top \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).