From: Stefano Brivio <sbrivio@redhat.com>
To: passt-dev@passt.top
Cc: Jon Maloy <jmaloy@redhat.com>,
David Gibson <david@gibson.dropbear.id.au>,
Laurent Vivier <lvivier@redhat.com>,
Paul Holzinger <pholzing@redhat.com>
Subject: [PATCH v11 19/23] pesto, conf, fwd_rule: Add options and modes to add, delete, clear rules
Date: Wed, 6 May 2026 23:31:51 +0200 [thread overview]
Message-ID: <20260506213155.1886983-20-sbrivio@redhat.com> (raw)
In-Reply-To: <20260506213155.1886983-1-sbrivio@redhat.com>
Instead of just being able to add to the existing tables, implement
an explicit --clear option to replace them, which now becomes the
default behaviour, and implement explicit --add and --delete options
to maintain the table and add or delete specific ports.
The option --clear PIF forces the clearing of a table, instead.
These options can be combined arbitrarily and are handled as
sequential commands, as now described in pesto(1).
If no option is given before forwarding specifiers for a matching
table, the command line is interpreted as a replacement of the
existing rules.
To this end:
- there's no protocol change, as pesto is anyway sending updated
copies of the table
- the forwarding table functions now include a new fwd_rule_del(),
which deletes existing rule only if a matching one is found
- a trivial fwd_rule_clear() is factored out from the existing
conf_handler() implementation, so that it can be directly used
in pesto
The entry points for parsing of port specifiers now take an additional
'del' parameter which is passed down all the way before reaching the
fwd_rule_add() implementation. If a rule should be deleted, at that
point, fwd_rule_del() is called instead.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
---
conf.c | 26 +++++-------
fwd_rule.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++------
fwd_rule.h | 4 +-
pesto.1 | 85 +++++++++++++++++++++++++++++++++++++++
pesto.c | 55 +++++++++++++++++++++++--
5 files changed, 253 insertions(+), 33 deletions(-)
diff --git a/conf.c b/conf.c
index 063e1a6..4a4ab48 100644
--- a/conf.c
+++ b/conf.c
@@ -1851,16 +1851,16 @@ void conf(struct ctx *c, int argc, char **argv)
if (name == 't') {
opt_t = true;
- fwd_rule_parse(name, optarg, c->fwd[PIF_HOST]);
+ fwd_rule_parse(name, false, optarg, c->fwd[PIF_HOST]);
} else if (name == 'u') {
opt_u = true;
- fwd_rule_parse(name, optarg, c->fwd[PIF_HOST]);
+ fwd_rule_parse(name, false, optarg, c->fwd[PIF_HOST]);
} else if (name == 'T') {
opt_T = true;
- fwd_rule_parse(name, optarg, c->fwd[PIF_SPLICE]);
+ fwd_rule_parse(name, false, optarg, c->fwd[PIF_SPLICE]);
} else if (name == 'U') {
opt_U = true;
- fwd_rule_parse(name, optarg, c->fwd[PIF_SPLICE]);
+ fwd_rule_parse(name, false, optarg, c->fwd[PIF_SPLICE]);
}
} while (name != -1);
@@ -1912,13 +1912,13 @@ void conf(struct ctx *c, int argc, char **argv)
if (c->mode == MODE_PASTA) {
if (!opt_t)
- fwd_rule_parse('t', "auto", c->fwd[PIF_HOST]);
+ fwd_rule_parse('t', false, "auto", c->fwd[PIF_HOST]);
if (!opt_T)
- fwd_rule_parse('T', "auto", c->fwd[PIF_SPLICE]);
+ fwd_rule_parse('T', false, "auto", c->fwd[PIF_SPLICE]);
if (!opt_u)
- fwd_rule_parse('u', "auto", c->fwd[PIF_HOST]);
+ fwd_rule_parse('u', false, "auto", c->fwd[PIF_HOST]);
if (!opt_U)
- fwd_rule_parse('U', "auto", c->fwd[PIF_SPLICE]);
+ fwd_rule_parse('U', false, "auto", c->fwd[PIF_SPLICE]);
}
conf_sock_listen(c);
@@ -2133,14 +2133,8 @@ void conf_handler(struct ctx *c, uint32_t events)
unsigned pif;
/* Clear pending tables */
- for (pif = 0; pif < PIF_NUM_TYPES; pif++) {
- struct fwd_table *fwd = c->fwd_pending[pif];
-
- if (!fwd)
- continue;
- fwd->count = 0;
- fwd->sock_count = 0;
- }
+ for (pif = 0; pif < PIF_NUM_TYPES; pif++)
+ fwd_rule_clear(c->fwd_pending[pif]);
/* FIXME: this could block indefinitely if the client doesn't
* write as much as it should
diff --git a/fwd_rule.c b/fwd_rule.c
index 200f4b5..5fc04d7 100644
--- a/fwd_rule.c
+++ b/fwd_rule.c
@@ -180,6 +180,89 @@ static bool fwd_rule_conflicts(const struct fwd_rule *a, const struct fwd_rule *
return true;
}
+/**
+ * fwd_rule_match() - Test if two rules exactly match each other
+ * @a: Rule to check against @b
+ * @b: Rule to check against @a
+ *
+ * Return: true if rules match exactly, false otherwise
+ */
+static bool fwd_rule_match(const struct fwd_rule *a, const struct fwd_rule *b)
+{
+ return !memcmp(a, b, sizeof(*a));
+}
+
+/**
+ * fwd_rule_clear() - Clear a forwarding table
+ * @fwd: Table to clear (might be NULL)
+ */
+void fwd_rule_clear(struct fwd_table *fwd)
+{
+ if (!fwd)
+ return;
+
+ /* TODO: check that there are no open sockets in the table before
+ * going on. See also a related item in fwd_rule_del().
+ */
+
+ fwd->count = 0;
+ fwd->sock_count = 0;
+}
+
+/**
+ * fwd_rule_del() - Partially validate and delete a rule from a forwarding table
+ * @fwd: Table to delete from
+ * @rule: Rule to delete (must conflict with an existing rule)
+ *
+ * Return: 0 on success, negative error code on failure (-ENOENT if not found)
+ *
+ * NOTE: This function can't be used for a forwarding table with any open socket
+ * stored in fwd->rulesocks.
+ */
+static int fwd_rule_del(struct fwd_table *fwd, const struct fwd_rule *rule)
+{
+ char rulestr[FWD_RULE_STRLEN], oldstr[FWD_RULE_STRLEN];
+ unsigned num, i;
+
+ for (i = 0; i < fwd->count; i++) {
+ if (fwd_rule_match(rule, &fwd->rules[i]))
+ break;
+
+ if (fwd_rule_conflicts(rule, &fwd->rules[i])) {
+ warn(
+"Specifier %s conflicts with rule %s, but doesn't match it, can't delete",
+ fwd_rule_fmt(rule, rulestr, sizeof(rulestr)),
+ fwd_rule_fmt(&fwd->rules[i], oldstr, sizeof(oldstr)));
+ return -EINVAL;
+ }
+ }
+
+ if (i == fwd->count) {
+ warn("Couldn't find forwarding rule to delete: %s",
+ fwd_rule_fmt(rule, rulestr, sizeof(rulestr)));
+ return -ENOENT;
+ }
+
+ /* Don't use anything else from 'rule' as passed, it's not validated */
+ rule = &fwd->rules[i];
+ num = (unsigned)rule->last - rule->first + 1;
+
+ fwd->count--;
+
+ memmove((void *)(fwd->rulesocks + i), (void *)(fwd->rulesocks + i + 1),
+ (fwd->count - i) * sizeof(*fwd->rulesocks));
+
+ /* TODO: move sockets stored starting from fwd->rulesocks[i + 1], should
+ * we ever need to delete rules from a table with open sockets.
+ */
+ fwd->sock_count -= num;
+
+ memmove(fwd->rules + i, fwd->rules + i + 1,
+ (fwd->count - i) * sizeof(*fwd->rules));
+
+ return 0;
+}
+
/**
* fwd_rule_add() - Validate and add a rule to a forwarding table
* @fwd: Table to add to
@@ -370,6 +453,7 @@ static int parse_keyword(const char *s, const char **endptr, const char *kw)
* fwd_rule_range_except() - Set up forwarding for a range of ports minus a
* bitmap of exclusions
* @fwd: Forwarding table to be updated
+ * @del: Delete resulting rules from forwarding table, instead of adding
* @proto: Protocol to forward
* @addr: Listening address
* @ifname: Listening interface
@@ -379,8 +463,8 @@ static int parse_keyword(const char *s, const char **endptr, const char *kw)
* @to: Port to translate @first to when forwarding
* @flags: Flags for forwarding entries
*/
-static void fwd_rule_range_except(struct fwd_table *fwd, uint8_t proto,
- const union inany_addr *addr,
+static void fwd_rule_range_except(struct fwd_table *fwd, bool del,
+ uint8_t proto, const union inany_addr *addr,
const char *ifname,
uint16_t first, uint16_t last,
const uint8_t *exclude, uint16_t to,
@@ -420,15 +504,20 @@ static void fwd_rule_range_except(struct fwd_table *fwd, uint8_t proto,
rule.last = i - 1;
rule.to = base + delta;
- if (fwd_rule_add(fwd, &rule) < 0)
- goto fail;
+ if (del) {
+ if (fwd_rule_del(fwd, &rule) < 0)
+ goto fail;
+ } else {
+ if (fwd_rule_add(fwd, &rule) < 0)
+ goto fail;
+ }
base = i - 1;
}
return;
fail:
- die("Unable to add rule %s",
+ die("Unable to %s rule %s", del ? "delete" : "add",
fwd_rule_fmt(&rule, rulestr, sizeof(rulestr)));
}
@@ -447,12 +536,13 @@ fail:
/**
* fwd_rule_parse_ports() - Parse port range(s) specifier
* @fwd: Forwarding table to be updated
+ * @del: Delete resulting rules from forwarding table, instead of adding
* @proto: Protocol to forward
* @addr: Listening address for forwarding
* @ifname: Interface name for listening
* @spec: Port range(s) specifier
*/
-static void fwd_rule_parse_ports(struct fwd_table *fwd, uint8_t proto,
+static void fwd_rule_parse_ports(struct fwd_table *fwd, bool del, uint8_t proto,
const union inany_addr *addr,
const char *ifname,
const char *spec)
@@ -509,7 +599,7 @@ static void fwd_rule_parse_ports(struct fwd_table *fwd, uint8_t proto,
/* Exclude ephemeral ports */
fwd_port_map_ephemeral(exclude);
- fwd_rule_range_except(fwd, proto, addr, ifname,
+ fwd_rule_range_except(fwd, del, proto, addr, ifname,
1, NUM_PORTS - 1, exclude,
1, flags | FWD_WEAK);
return;
@@ -539,7 +629,7 @@ static void fwd_rule_parse_ports(struct fwd_table *fwd, uint8_t proto,
if (p != ep) /* Garbage after the ranges */
goto bad;
- fwd_rule_range_except(fwd, proto, addr, ifname,
+ fwd_rule_range_except(fwd, del, proto, addr, ifname,
orig_range.first, orig_range.last,
exclude,
mapped_range.first, flags);
@@ -553,10 +643,12 @@ bad:
/**
* fwd_rule_parse() - Parse port configuration option
* @optname: Short option name, t, T, u, or U
+ * @del: Delete resulting rules from forwarding table, instead of adding
* @optarg: Option argument (port specification)
* @fwd: Forwarding table to be updated
*/
-void fwd_rule_parse(char optname, const char *optarg, struct fwd_table *fwd)
+void fwd_rule_parse(char optname, bool del, const char *optarg,
+ struct fwd_table *fwd)
{
union inany_addr addr_buf = inany_any6, *addr = &addr_buf;
char buf[BUFSIZ], *spec, *ifname = NULL;
@@ -634,12 +726,12 @@ void fwd_rule_parse(char optname, const char *optarg, struct fwd_table *fwd)
optname, optarg);
if (fwd->caps & FWD_CAP_IPV4) {
- fwd_rule_parse_ports(fwd, proto,
+ fwd_rule_parse_ports(fwd, del, proto,
&inany_loopback4, NULL,
spec);
}
if (fwd->caps & FWD_CAP_IPV6) {
- fwd_rule_parse_ports(fwd, proto,
+ fwd_rule_parse_ports(fwd, del, proto,
&inany_loopback6, NULL,
spec);
}
@@ -655,7 +747,7 @@ void fwd_rule_parse(char optname, const char *optarg, struct fwd_table *fwd)
optname, optarg);
}
- fwd_rule_parse_ports(fwd, proto, addr, ifname, spec);
+ fwd_rule_parse_ports(fwd, del, proto, addr, ifname, spec);
}
/**
diff --git a/fwd_rule.h b/fwd_rule.h
index f43b37d..ae9a3cb 100644
--- a/fwd_rule.h
+++ b/fwd_rule.h
@@ -100,9 +100,11 @@ void fwd_probe_ephemeral(void);
const union inany_addr *fwd_rule_addr(const struct fwd_rule *rule);
const char *fwd_rule_fmt(const struct fwd_rule *rule, char *dst, size_t size);
-void fwd_rule_parse(char optname, const char *optarg, struct fwd_table *fwd);
+void fwd_rule_parse(char optname, bool del, const char *optarg,
+ struct fwd_table *fwd);
int fwd_rule_read(int fd, struct fwd_rule *rule);
int fwd_rule_write(int fd, const struct fwd_rule *rule);
+void fwd_rule_clear(struct fwd_table *fwd);
int fwd_rule_add(struct fwd_table *fwd, const struct fwd_rule *new);
/**
diff --git a/pesto.1 b/pesto.1
index 1e1c0f3..c13a18e 100644
--- a/pesto.1
+++ b/pesto.1
@@ -35,6 +35,42 @@ Display a help message and exit.
.BR \-s ", " \-\-show
Show the forwarding configuration before and after changes are applied.
+.TP
+.BR \-A ", " \-\-add
+Add the port forwarding specifiers following this option to the current
+forwarding table, rather than replacing it.
+
+This option can be given multiple times, as it might follow previous deletions
+(see \fB--delete\fR below), and implies that all the specifiers following it,
+before a further \fB--delete\fR option occurs, will be handled as additions.
+
+See the section \fBAdding, deleting, clearing rules\fR in the \fBNOTES\fR for
+more details.
+
+.TP
+.BR \-D ", " \-\-delete
+Delete the port forwarding specifiers following this option from the current
+forwarding table, rather than adding them to it.
+
+This option can be given multiple times, as it might follow previous additions
+(see \fB--add\fR above), and implies that all the specifiers following it,
+before a further \fB--add\fR option occurs, will be handled as deletions.
+
+See the section \fBAdding, deleting, clearing rules\fR in the \fBNOTES\fR for
+more details.
+
+.TP
+.BR \-C ", " \-\-clear " " \fIpif
+Clear the forwarding table associated to a given \fIpif\fR, that is, a
+conceptual type of interface in \fBpasst\fR(1) or \fBpasta\fR(1) representing a
+specific data path and direction.
+
+The available \fIpif\fR names can be obtained by querying the current forwarding
+configuration, which can be done by calling \fBpesto\fR(1) without options.
+
+See the section \fBAdding, deleting, clearing rules\fR in the \fBNOTES\fR for
+more details.
+
.TP
.BR \-t ", " \-\-tcp-ports " " \fIspec
Configure TCP port forwarding to guest or namespace. \fIspec\fR can be one of:
@@ -166,6 +202,55 @@ Configure UDP port forwarding from target namespace to init namespace.
.BR \-\-version
Show version and exit.
+.SH NOTES
+
+.SS Adding, deleting, clearing rules
+
+The options \fB--add\fR, \fB--delete\fR, and \fB--clear\fR are handled as
+sequential commands to manipulate the current forwarding tables. If none of them
+is given, forwarding specifiers for a given table are intended as replacement of
+the corresponding table. That is:
+
+.nf
+ pesto -t 1024 -U 1025
+.fi
+
+will \fBreplace\fR the current TCP inbound port forwarding table with a single
+rule, forwarding port 1024, and will similarly replace the UDP outbound
+forwarding table with a single forwarding rule for port 1025. This usage is a
+short-hand form for:
+
+.nf
+ pesto -C HOST -t 1024 -C SPLICE -U 1025
+.fi
+
+The options \fB--add\fR and \fB--delete\fR are used to \fBadd new specific
+rules or delete existing ones\fR, instead of replacing tables. For example:
+
+.nf
+ pesto -A -t 2000 -D -t 3000 -U 5000
+.fi
+
+will add a forwarding rule for inbound TCP port 2000, and delete inbound TCP
+port 3000 as well as outbound UDP port 5000 from the existing set of rules.
+
+All these options are interpreted as sequential commands and can be arbitrarily
+combined. For example:
+
+.nf
+ pesto -A -t 2000 -C HOST -A -T 3000 -t 2001 -D -u 5000
+.fi
+
+will, in order:
+
+.RS
+- add inbound TCP port 2000
+- clear inbound ports, reverting the addition above
+- add outbound TCP port 3000
+- add inbound TCP port 2001
+- delete inbound UDP port 5000
+.RE
+
.SH AUTHORS
Stefano Brivio <sbrivio@redhat.com>,
diff --git a/pesto.c b/pesto.c
index 73fdc39..f4d752b 100644
--- a/pesto.c
+++ b/pesto.c
@@ -55,6 +55,9 @@ static void usage(const char *name, FILE *f, int status)
FPRINTF(f, "Usage: %s [OPTION]... PATH\n", name);
FPRINTF(f,
"\n"
+ " -A, --add Add following specifiers to forwards\n"
+ " -D, --delete Delete following specifiers instead\n"
+ " -C, --clear PIF Clear forwarding table for given PIF\n"
" -t, --tcp-ports SPEC TCP inbound port forwarding\n"
" can be specified multiple times\n"
" SPEC can be:\n"
@@ -298,6 +301,9 @@ int main(int argc, char **argv)
{"debug", no_argument, NULL, 'd' },
{"help", no_argument, NULL, 'h' },
{"version", no_argument, NULL, 1 },
+ {"add", no_argument, NULL, 'A' },
+ {"delete", no_argument, NULL, 'D' },
+ {"clear", required_argument, NULL, 'C' },
{"tcp-ports", required_argument, NULL, 't' },
{"udp-ports", required_argument, NULL, 'u' },
{"tcp-ns", required_argument, NULL, 'T' },
@@ -305,9 +311,11 @@ int main(int argc, char **argv)
{"show", no_argument, NULL, 's' },
{ 0 },
};
+ enum { MODE_CLEAR, MODE_ADD, MODE_DEL } mode = MODE_CLEAR;
+ bool inbound_cleared = false, outbound_cleared = false;
struct pif_configuration *inbound, *outbound;
+ const char *optstring = "dhADC:t:u:T:U:s";
struct sockaddr_un a = { AF_UNIX, "" };
- const char *optstring = "dht:u:T:U:s";
struct configuration conf = { 0 };
bool update = false, show = false;
struct pesto_hello hello;
@@ -339,11 +347,16 @@ int main(int argc, char **argv)
case -1:
case 0:
break;
+ case 'C':
case 't':
case 'u':
case 'T':
case 'U':
- /* Parse these options after we've read state from passt/pasta */
+ case 'A':
+ case 'D':
+ /* Parse these options after we've read state from
+ * passt/pasta
+ */
update = true;
break;
case 's':
@@ -436,16 +449,43 @@ int main(int argc, char **argv)
optind = 0;
do {
+ struct pif_configuration *pif_to_clear;
+
optname = getopt_long(argc, argv, optstring, options, NULL);
switch (optname) {
+ case 'A':
+ mode = MODE_ADD;
+ break;
+ case 'D':
+ mode = MODE_DEL;
+ break;
+ case 'C':
+ if (!(pif_to_clear = pif_conf_by_name(&conf, optarg)))
+ die("Unsupported pif name %s", optarg);
+
+ fwd_rule_clear(&pif_to_clear->fwd);
+
+ if (!strcmp(optarg, "HOST"))
+ inbound_cleared = true;
+ else if (!strcmp(optarg, "SPLICE"))
+ outbound_cleared = true;
+
+ break;
case 't':
case 'u':
if (!inbound) {
die("Can't use -%c, no inbound interface",
optname);
}
- fwd_rule_parse(optname, optarg, &inbound->fwd);
+
+ if (mode == MODE_CLEAR && !inbound_cleared) {
+ fwd_rule_clear(&inbound->fwd);
+ inbound_cleared = true;
+ }
+
+ fwd_rule_parse(optname, mode == MODE_DEL, optarg,
+ &inbound->fwd);
break;
case 'T':
case 'U':
@@ -453,7 +493,14 @@ int main(int argc, char **argv)
die("Can't use -%c, no outbound interface",
optname);
}
- fwd_rule_parse(optname, optarg, &outbound->fwd);
+
+ if (mode == MODE_CLEAR && !outbound_cleared) {
+ fwd_rule_clear(&outbound->fwd);
+ outbound_cleared = true;
+ }
+
+ fwd_rule_parse(optname, mode == MODE_DEL, optarg,
+ &outbound->fwd);
break;
default:
continue;
--
2.43.0
next prev parent reply other threads:[~2026-05-06 21:31 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 21:31 [PATCH v11 00/23] Dynamic configuration update implementation Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 01/23] conf, fwd: Stricter rule checking in fwd_rule_add() Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 02/23] fwd_rule: Move ephemeral port probing to fwd_rule.c Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 03/23] fwd, conf: Move rule parsing code to fwd_rule.[ch] Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 04/23] fwd_rule: Move conflict checking back within fwd_rule_add() Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 05/23] fwd: Generalise fwd_rules_info() Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 06/23] pif: Limit pif names to 128 bytes Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 07/23] fwd_rule: Fix some format specifiers Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 08/23] pesto: Introduce stub configuration tool Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 09/23] pesto, log: Share log.h (but not log.c) with pesto tool Stefano Brivio
2026-05-06 23:41 ` David Gibson
2026-05-06 21:31 ` [PATCH v11 10/23] pesto, conf: Have pesto connect to passt and check versions Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 11/23] pesto: Expose list of pifs to pesto and display them Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 12/23] ip: Prepare ip.[ch] for sharing with pesto tool Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 13/23] inany: Prepare inany.[ch] " Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 14/23] pesto: Read current ruleset from passt/pasta and optionally display it Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 15/23] pesto: Parse and add new rules from command line Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 16/23] pesto, conf: Send updated rules from pesto back to passt/pasta Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 17/23] conf, fwd: Allow switching to new rules received from pesto Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 18/23] fwd_rule: Fix static checkers warnings in fwd_rule_add() Stefano Brivio
2026-05-06 21:31 ` Stefano Brivio [this message]
2026-05-06 23:51 ` [PATCH v11 19/23] pesto, conf, fwd_rule: Add options and modes to add, delete, clear rules David Gibson
2026-05-07 2:10 ` Stefano Brivio
2026-05-07 3:18 ` David Gibson
2026-05-06 21:31 ` [PATCH v11 20/23] apparmor: Add policy file for pesto Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 21/23] selinux: Add file context and type enforcement " Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 22/23] fedora: Install pesto, its SELinux policy, and the man page from the spec file Stefano Brivio
2026-05-06 21:31 ` [PATCH v11 23/23] hooks: Copy static build of pesto and related man page to server Stefano Brivio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260506213155.1886983-20-sbrivio@redhat.com \
--to=sbrivio@redhat.com \
--cc=david@gibson.dropbear.id.au \
--cc=jmaloy@redhat.com \
--cc=lvivier@redhat.com \
--cc=passt-dev@passt.top \
--cc=pholzing@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).