[PATCH v4 0/5] Test cases to display memory usage in kernel and userspace

[PATCH v4 0/5] Test cases to display memory usage in kernel and userspace

[Stefano Brivio]

Note that 2/5 is not actually needed for the purposes of these "test
cases" (which always succeed, at the moment), it just fixes a
condition I hit while writing them.

v4: Fold changes by David: use a dummy interface for the purpose of
    starting passt, and drop setup and teardown steps related to the
    "outer" instance of passt, now gone. Install passt in /bin
    instead of /usr/bin, but also add a link

v3: In 5/5, drop useless conditionals and teardown steps as pointed
    out by David

v2: Actually include passt.mem.mbuto in 5/5, and move the introduction
    of INITRAMFS_MEM for the setup function there

Stefano Brivio (5):
  test/lib: Move screen-scraping setup and layout functions to _ugly
    files
  tap: Support for detection of existing sockets on ramfs
  test/lib/perf_report: Use own flag to track initialisation
  test/lib: Add "td" directive, handled by table_value()
  test: Add memory/passt test cases

 tap.c                |   3 +-
 test/Makefile        |   5 +-
 test/lib/layout      |  69 ----------------
 test/lib/layout_ugly | 113 ++++++++++++++++++++++++++
 test/lib/perf_report |   9 ++-
 test/lib/setup       |  23 ------
 test/lib/setup_ugly  |  58 ++++++++++++++
 test/lib/term        |  28 +++++++
 test/lib/test        |   3 +
 test/memory/passt    | 187 +++++++++++++++++++++++++++++++++++++++++++
 test/passt.mem.mbuto |  44 ++++++++++
 test/run             |   6 ++
 12 files changed, 451 insertions(+), 97 deletions(-)
 create mode 100644 test/lib/layout_ugly
 create mode 100755 test/lib/setup_ugly
 create mode 100644 test/memory/passt
 create mode 100755 test/passt.mem.mbuto

-- 
2.35.1

[PATCH v4 1/5] test/lib: Move screen-scraping setup and layout functions to _ugly files

[Stefano Brivio]

I'm going to add yet another one of those, for which I have no quick
solution. It's a regression in some sense, but at least if we make
this regression more observable and defined, it should be easier to
find a comprehensive solution later, within this or another testing
framework.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
---
 test/lib/layout      | 69 ------------------------------------
 test/lib/layout_ugly | 83 ++++++++++++++++++++++++++++++++++++++++++++
 test/lib/setup       | 23 ------------
 test/lib/setup_ugly  | 38 ++++++++++++++++++++
 test/run             |  2 ++
 5 files changed, 123 insertions(+), 92 deletions(-)
 create mode 100644 test/lib/layout_ugly
 create mode 100755 test/lib/setup_ugly

diff --git a/test/lib/layout b/test/lib/layout
index fcd1db4..b190060 100644
--- a/test/lib/layout
+++ b/test/lib/layout
@@ -13,75 +13,6 @@
 # Copyright (c) 2021 Red Hat GmbH
 # Author: Stefano Brivio <sbrivio@redhat.com>
 
-# layout_host() - Simple host commands layout with info and host panes
-layout_host() {
-	sleep 3
-
-	tmux kill-pane -a -t 0
-	cmd_write 0 clear
-
-	tmux split-window -h -l '35%' -t passt_test:1.0
-
-	PANE_HOST=0
-	PANE_INFO=1
-
-	get_info_cols
-
-	tmux send-keys -l -t ${PANE_INFO} 'while cat '"$STATEBASE/log_pipe"'; do :; done'
-	tmux send-keys -t ${PANE_INFO} -N 100 C-m
-	tmux select-pane -t ${PANE_INFO} -T "test log"
-
-	if context_exists host; then
-	    pane_watch_contexts 0 host host
-	else
-	    tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
-	    tmux select-pane -t ${PANE_HOST} -T "host"
-	fi
-
-	info_layout "host commands only"
-
-	sleep 1
-}
-
-# layout_pasta_simple() - Panes for host and pasta
-layout_pasta_simple() {
-	sleep 3
-
-	tmux kill-pane -a -t 0
-	cmd_write 0 clear
-
-	tmux split-window -v -t passt_test
-	tmux split-window -h -t passt_test
-
-	PANE_PASST=0
-	PANE_HOST=1
-	PANE_INFO=2
-
-	get_info_cols
-
-	tmux send-keys -l -t ${PANE_INFO} 'while cat '"$STATEBASE/log_pipe"'; do :; done'
-	tmux send-keys -t ${PANE_INFO} -N 100 C-m
-	tmux select-pane -t ${PANE_INFO} -T "test log"
-
-	if context_exists host; then
-		pane_watch_contexts ${PANE_HOST} host host
-	else
-		tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
-		tmux select-pane -t ${PANE_HOST} -T "host"
-	fi
-
-	if context_exists passt; then
-		pane_watch_contexts ${PANE_PASST} host host
-	else
-		tmux pipe-pane -O -t ${PANE_PASST} "cat >> ${LOGDIR}/pane_passt.log"
-		tmux select-pane -t ${PANE_PASST} -T "pasta"
-	fi
-
-	info_layout "single pasta instance"
-
-	sleep 1
-}
-
 # layout_pasta() - Panes for host, pasta, and separate one for namespace
 layout_pasta() {
 	sleep 3
diff --git a/test/lib/layout_ugly b/test/lib/layout_ugly
new file mode 100644
index 0000000..9397b7d
--- /dev/null
+++ b/test/lib/layout_ugly
@@ -0,0 +1,83 @@
+#!/bin/sh
+#
+# SPDX-License-Identifier: AGPL-3.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/lib/layout_ugly - screen-scraped tmux pane layouts
+#
+# Copyright (c) 2022 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+# layout_host() - Simple host commands layout with info and host panes
+layout_host() {
+	sleep 3
+
+	tmux kill-pane -a -t 0
+	cmd_write 0 clear
+
+	tmux split-window -h -l '35%' -t passt_test:1.0
+
+	PANE_HOST=0
+	PANE_INFO=1
+
+	get_info_cols
+
+	tmux send-keys -l -t ${PANE_INFO} 'while cat '"$STATEBASE/log_pipe"'; do :; done'
+	tmux send-keys -t ${PANE_INFO} -N 100 C-m
+	tmux select-pane -t ${PANE_INFO} -T "test log"
+
+	if context_exists host; then
+		pane_watch_contexts 0 host host
+	else
+		tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
+		tmux select-pane -t ${PANE_HOST} -T "host"
+	fi
+
+	info_layout "host commands only"
+
+	sleep 1
+}
+
+# layout_pasta_simple() - Panes for host and pasta
+layout_pasta_simple() {
+	sleep 3
+
+	tmux kill-pane -a -t 0
+	cmd_write 0 clear
+
+	tmux split-window -v -t passt_test
+	tmux split-window -h -t passt_test
+
+	PANE_PASST=0
+	PANE_HOST=1
+	PANE_INFO=2
+
+	get_info_cols
+
+	tmux send-keys -l -t ${PANE_INFO} 'while cat '"$STATEBASE/log_pipe"'; do :; done'
+	tmux send-keys -t ${PANE_INFO} -N 100 C-m
+	tmux select-pane -t ${PANE_INFO} -T "test log"
+
+	if context_exists host; then
+		pane_watch_contexts ${PANE_HOST} host host
+	else
+		tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
+		tmux select-pane -t ${PANE_HOST} -T "host"
+	fi
+
+	if context_exists passt; then
+		pane_watch_contexts ${PANE_PASST} host host
+	else
+		tmux pipe-pane -O -t ${PANE_PASST} "cat >> ${LOGDIR}/pane_passt.log"
+		tmux select-pane -t ${PANE_PASST} -T "pasta"
+	fi
+
+	info_layout "single pasta instance"
+
+	sleep 1
+}
diff --git a/test/lib/setup b/test/lib/setup
index e2d0ff0..ab6d8d5 100755
--- a/test/lib/setup
+++ b/test/lib/setup
@@ -26,11 +26,6 @@ setup_build() {
 	layout_host
 }
 
-# setup_distro() - Set up pane layout for distro tests
-setup_distro() {
-	layout_host
-}
-
 # setup_passt() - Start qemu and passt
 setup_passt() {
 	context_setup_host host
@@ -106,13 +101,6 @@ setup_pasta() {
 	wait_for [ -f "${STATESETUP}/passt.pid" ]
 }
 
-# setup_pasta_options() - Set up layout and host context without starting pasta
-setup_pasta_options() {
-	context_setup_host host
-
-	layout_pasta_simple
-}
-
 # setup_passt_in_ns() - Set up namespace (with pasta), run qemu and passt into it
 setup_passt_in_ns() {
 	context_setup_host host
@@ -285,11 +273,6 @@ teardown_build() {
 	teardown_context_watch ${PANE_HOST} host
 }
 
-# teardown_distro() - Nothing to do, yet
-teardown_distro() {
-    :
-}
-
 # teardown_passt() - Kill qemu, remove passt PID file
 teardown_passt() {
 	kill $(cat "${STATESETUP}/qemu.pid")
@@ -311,12 +294,6 @@ teardown_pasta() {
 	teardown_context_watch ${PANE_NS} unshare ns
 }
 
-# teardown_pasta_options() - Tear down pasta and host context, no namespace
-teardown_pasta_options() {
-	teardown_context_watch ${PANE_HOST} host
-	teardown_context_watch ${PANE_PASST} passt
-}
-
 # teardown_passt_in_ns() - Exit namespace, kill qemu and pasta, remove pid file
 teardown_passt_in_ns() {
 	context_run ns kill $(cat "${STATESETUP}/qemu.pid")
diff --git a/test/lib/setup_ugly b/test/lib/setup_ugly
new file mode 100755
index 0000000..764177e
--- /dev/null
+++ b/test/lib/setup_ugly
@@ -0,0 +1,38 @@
+#!/bin/sh
+#
+# SPDX-License-Identifier: AGPL-3.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/lib/setup_ugly - Setup functions using screen-scraping instead of context
+#
+# Copyright (c) 2022 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+# setup_distro() - Set up pane layout for distro tests
+setup_distro() {
+	layout_host
+}
+
+# setup_pasta_options() - Set up layout and host context without starting pasta
+setup_pasta_options() {
+	context_setup_host host
+
+	layout_pasta_simple
+}
+
+# teardown_distro() - Nothing to do, yet
+teardown_distro() {
+	:
+}
+
+# teardown_pasta_options() - Tear down pasta and host context, no namespace
+teardown_pasta_options() {
+	teardown_context_watch ${PANE_HOST} host
+	teardown_context_watch ${PANE_PASST} passt
+}
+
diff --git a/test/run b/test/run
index cb3b6c0..c3486b9 100755
--- a/test/run
+++ b/test/run
@@ -39,10 +39,12 @@ COMMIT="$(git log --oneline --no-decorate -1)"
 
 . lib/util
 . lib/setup
+. lib/setup_ugly
 . lib/context
 . lib/term
 . lib/perf_report
 . lib/layout
+. lib/layout_ugly
 . lib/test
 . lib/video
 
-- 
@@ -39,10 +39,12 @@ COMMIT="$(git log --oneline --no-decorate -1)"
 
 . lib/util
 . lib/setup
+. lib/setup_ugly
 . lib/context
 . lib/term
 . lib/perf_report
 . lib/layout
+. lib/layout_ugly
 . lib/test
 . lib/video
 
-- 
2.35.1

[PATCH v4 2/5] tap: Support for detection of existing sockets on ramfs

[Stefano Brivio]

On ramfs, connecting to a non-existent UNIX domain socket yields
EACCESS, instead of ENOENT. This is visible if we use passt directly
on rootfs (a ramfs instance) from an initramfs image.

It's probably wrong for ramfs to return EACCES, but given the
simplicity of the filesystem, I doubt we should try to fix it there
at the possible cost of added complexity.

Also, this whole beauty should go away once qrap-less usage is
established, so just accept EACCES as indication that a conflicting
socket does not, in fact, exist.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
---
 tap.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tap.c b/tap.c
index 4dcff4f..0a3ccce 100644
--- a/tap.c
+++ b/tap.c
@@ -912,7 +912,8 @@ static void tap_sock_unix_init(struct ctx *c)
 		}
 
 		ret = connect(ex, (const struct sockaddr *)&addr, sizeof(addr));
-		if (!ret || (errno != ENOENT && errno != ECONNREFUSED)) {
+		if (!ret || (errno != ENOENT && errno != ECONNREFUSED &&
+			     errno != EACCES)) {
 			if (*c->sock_path) {
 				err("Socket path %s already in use", path);
 				exit(EXIT_FAILURE);
-- 
@@ -912,7 +912,8 @@ static void tap_sock_unix_init(struct ctx *c)
 		}
 
 		ret = connect(ex, (const struct sockaddr *)&addr, sizeof(addr));
-		if (!ret || (errno != ENOENT && errno != ECONNREFUSED)) {
+		if (!ret || (errno != ENOENT && errno != ECONNREFUSED &&
+			     errno != EACCES)) {
 			if (*c->sock_path) {
 				err("Socket path %s already in use", path);
 				exit(EXIT_FAILURE);
-- 
2.35.1

[PATCH v4 3/5] test/lib/perf_report: Use own flag to track initialisation

[Stefano Brivio]

Instead of just disabling performance reports if running in demo
mode. This allows us to use table functions outside of performance
reports.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
---
 test/lib/perf_report | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/test/lib/perf_report b/test/lib/perf_report
index ed71ef9..4ffb14b 100755
--- a/test/lib/perf_report
+++ b/test/lib/perf_report
@@ -13,6 +13,7 @@
 # Copyright (c) 2021 Red Hat GmbH
 # Author: Stefano Brivio <sbrivio@redhat.com>
 
+PERF_INIT=0
 PERF_LINK_COUNT=0
 PERF_JS="${LOGDIR}/web/perf.js"
 
@@ -129,6 +130,7 @@ perf_init() {
         mkdir -p "$(dirname "${PERF_JS}")"
 	echo "${PERF_TEMPLATE_HTML}" > "${PERF_JS}"
 	perf_report_sub commit "$(echo ${COMMIT} | sed "s/'/\\\'/g")"
+	PERF_INIT=1
 }
 
 # perf_fill_lines() - Fill multiple "LINE" directives in template, matching rows
@@ -178,6 +180,7 @@ perf_fill_lines() {
 
 # perf_finish() - Add trailing backslashes and process ending templates
 perf_finish() {
+	PERF_INIT=0
 	perf_fill_lines
 	sed -i 's/^.*$/&\\/g' "${PERF_JS}"
 	echo "${PERF_TEMPLATE_JS}" >> "${PERF_JS}"
@@ -215,7 +218,7 @@ perf_report() {
 
 # perf_th() - Table header for a set of tests
 perf_th() {
-	[ ${DEMO} -eq 1 ] && return
+	[ ${PERF_INIT} -eq 0 ] && return
 
 	shift
 
@@ -231,7 +234,7 @@ perf_th() {
 
 # perf_tr() - Main table row
 perf_tr() {
-	[ ${DEMO} -eq 1 ] && return
+	[ ${PERF_INIT} -eq 0 ] && return
 
 	__line_no=0
 	shift
@@ -244,7 +247,7 @@ perf_tr() {
 
 # perf_td() - Single cell with test result
 perf_td() {
-	[ ${DEMO} -eq 1 ] && return
+	[ ${PERF_INIT} -eq 0 ] && return
 
 	__rewind="${1}"
 	shift
-- 
@@ -13,6 +13,7 @@
 # Copyright (c) 2021 Red Hat GmbH
 # Author: Stefano Brivio <sbrivio@redhat.com>
 
+PERF_INIT=0
 PERF_LINK_COUNT=0
 PERF_JS="${LOGDIR}/web/perf.js"
 
@@ -129,6 +130,7 @@ perf_init() {
         mkdir -p "$(dirname "${PERF_JS}")"
 	echo "${PERF_TEMPLATE_HTML}" > "${PERF_JS}"
 	perf_report_sub commit "$(echo ${COMMIT} | sed "s/'/\\\'/g")"
+	PERF_INIT=1
 }
 
 # perf_fill_lines() - Fill multiple "LINE" directives in template, matching rows
@@ -178,6 +180,7 @@ perf_fill_lines() {
 
 # perf_finish() - Add trailing backslashes and process ending templates
 perf_finish() {
+	PERF_INIT=0
 	perf_fill_lines
 	sed -i 's/^.*$/&\\/g' "${PERF_JS}"
 	echo "${PERF_TEMPLATE_JS}" >> "${PERF_JS}"
@@ -215,7 +218,7 @@ perf_report() {
 
 # perf_th() - Table header for a set of tests
 perf_th() {
-	[ ${DEMO} -eq 1 ] && return
+	[ ${PERF_INIT} -eq 0 ] && return
 
 	shift
 
@@ -231,7 +234,7 @@ perf_th() {
 
 # perf_tr() - Main table row
 perf_tr() {
-	[ ${DEMO} -eq 1 ] && return
+	[ ${PERF_INIT} -eq 0 ] && return
 
 	__line_no=0
 	shift
@@ -244,7 +247,7 @@ perf_tr() {
 
 # perf_td() - Single cell with test result
 perf_td() {
-	[ ${DEMO} -eq 1 ] && return
+	[ ${PERF_INIT} -eq 0 ] && return
 
 	__rewind="${1}"
 	shift
-- 
2.35.1

[PATCH v4 4/5] test/lib: Add "td" directive, handled by table_value()

[Stefano Brivio]

This can be used for generic cell values with an arbitrary scale.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
---
 test/lib/term | 28 ++++++++++++++++++++++++++++
 test/lib/test |  3 +++
 2 files changed, 31 insertions(+)

diff --git a/test/lib/term b/test/lib/term
index 1b42df8..8515c50 100755
--- a/test/lib/term
+++ b/test/lib/term
@@ -552,6 +552,34 @@ table_end() {
 	info_n "\n${__buf}'\n"
 }
 
+# table_value() - Print generic table value in its own cell
+# $1:	Value, can be '-' to indicate a filler
+# $2:	Scale, exponent of 10
+# $3:	Error value, scaled: if value is less than this, print in red
+# $4:	Warning value, scaled: if value is less than this, print in yellow
+table_value() {
+	[ "${1}" = "-" ] && table_cell 1 "-" && perf_td 0 "" && return 0
+	if [ "${2}" != "0" ]; then
+		__v="$(echo "scale=1; x=( ${1} + 10^$((${2} - 1)) / 2 ) / 10^${2}; if ( x < 1 && x > 0 ) print 0; x" | bc -l)"
+	else
+		__v="${1}"
+	fi
+	perf_td 0 "${__v}"
+
+	__red="${3}"
+	__yellow="${4}"
+	if [ "$(echo "${__v} < ${__red}" | bc -l)" = "1" ]; then
+		table_cell ${#__v} "${PR_RED}${__v}${PR_NC}"
+		return 1
+	elif [ "$(echo "${__v} < ${__yellow}" | bc -l)" = "1" ]; then
+		table_cell ${#__v} "${PR_YELLOW}${__v}${PR_NC}"
+		return 1
+	else
+		table_cell ${#__v} "${PR_GREEN}${__v}${PR_NC}"
+		return 0
+	fi
+}
+
 table_value_throughput() {
 	[ "${1}" = "-" ] && table_cell 1 "-" && perf_td 0 "" && return 0
 	__v="$(echo "scale=1; x=( ${1} + 10^8 / 2 ) / 10^9; if ( x < 1 && x > 0 ) print 0; x" | bc -l)"
diff --git a/test/lib/test b/test/lib/test
index 4c271a5..df32178 100755
--- a/test/lib/test
+++ b/test/lib/test
@@ -278,6 +278,9 @@ test_one_line() {
 	"te")
 		table_end
 		;;
+	"td")
+		table_value ${__arg} || TEST_ONE_perf_nok=1
+		;;
 	"bw")
 		table_value_throughput ${__arg} || TEST_ONE_perf_nok=1
 		;;
-- 
@@ -278,6 +278,9 @@ test_one_line() {
 	"te")
 		table_end
 		;;
+	"td")
+		table_value ${__arg} || TEST_ONE_perf_nok=1
+		;;
 	"bw")
 		table_value_throughput ${__arg} || TEST_ONE_perf_nok=1
 		;;
-- 
2.35.1

[PATCH v4 5/5] test: Add memory/passt test cases

[Stefano Brivio]

These show a summary of memory usage in kernel and userspace with
different port forwarding configurations, details of userspace usage
using 'nm' (passt only uses statically allocated memory), and details
of kernel memory from slab reporting facilities.

This adds a new test image, mbuto.mem.img, with harcoded IPv4 and
IPv6 addresses and routes, and just the tools we need to start and
stop passt, to report from /proc/slabinfo, /proc/meminfo, and to
print and parse symbol sizes using nm(1).

passt can't pivot_root() for sandboxing purposes on ramfs, so we need
to create another filesystem and chroot into it, first.

We don't want to use pane context functions, as we're checking memory
usage for sockets: resort to screen-scraping.

Configure a dummy interface to provide passt with an appearance of
working IPv4 and IPv6 connectivity, contributed by David.

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
---
 test/Makefile        |   5 +-
 test/lib/layout_ugly |  30 +++++++
 test/lib/setup_ugly  |  20 +++++
 test/memory/passt    | 187 +++++++++++++++++++++++++++++++++++++++++++
 test/passt.mem.mbuto |  44 ++++++++++
 test/run             |   4 +
 6 files changed, 289 insertions(+), 1 deletion(-)
 create mode 100644 test/memory/passt
 create mode 100755 test/passt.mem.mbuto

diff --git a/test/Makefile b/test/Makefile
index 91498ff..9f2bc42 100644
--- a/test/Makefile
+++ b/test/Makefile
@@ -55,7 +55,7 @@ UBUNTU_IMGS = $(UBUNTU_OLD_IMGS) $(UBUNTU_NEW_IMGS)
 DOWNLOAD_ASSETS = mbuto \
 	$(DEBIAN_IMGS) $(FEDORA_IMGS) $(OPENSUSE_IMGS) $(UBUNTU_IMGS)
 TESTDATA_ASSETS = small.bin big.bin medium.bin
-LOCAL_ASSETS = mbuto.img QEMU_EFI.fd \
+LOCAL_ASSETS = mbuto.img mbuto.mem.img QEMU_EFI.fd \
 	$(DEBIAN_IMGS:%=prepared-%) $(FEDORA_IMGS:%=prepared-%) \
 	$(UBUNTU_NEW_IMGS:%=prepared-%) \
 	nsholder guest-key guest-key.pub \
@@ -76,6 +76,9 @@ guest-key guest-key.pub:
 mbuto.img: passt.mbuto mbuto guest-key.pub $(TESTDATA_ASSETS)
 	./mbuto/mbuto -p ./$< -c lz4 -f $@
 
+mbuto.mem.img: passt.mem.mbuto mbuto ../passt.avx2
+	./mbuto/mbuto -p ./$< -c lz4 -f $@
+
 nsholder: nsholder.c
 	$(CC) $(CFLAGS) -o $@ $^
 
diff --git a/test/lib/layout_ugly b/test/lib/layout_ugly
index 9397b7d..22f6169 100644
--- a/test/lib/layout_ugly
+++ b/test/lib/layout_ugly
@@ -81,3 +81,33 @@ layout_pasta_simple() {
 
 	sleep 1
 }
+
+# layout_memory() - Screen-scraped panes for memory usage tests, big guest pane
+layout_memory() {
+	sleep 3
+
+	tmux kill-pane -a -t 0
+	cmd_write 0 clear
+
+	tmux split-window -h -l '35%' -t passt_test
+
+	PANE_GUEST=0
+	PANE_INFO=1
+
+	get_info_cols
+
+	tmux send-keys -l -t ${PANE_INFO} 'while cat '"$STATEBASE/log_pipe"'; do :; done'
+	tmux send-keys -t ${PANE_INFO} -N 100 C-m
+	tmux select-pane -t ${PANE_INFO} -T "test log"
+
+	if context_exists guest; then
+		pane_watch_contexts ${PANE_GUEST} guest guest
+	else
+		tmux pipe-pane -O -t ${PANE_GUEST} "cat >> ${LOGDIR}/pane_guest.log"
+		tmux select-pane -t ${PANE_GUEST} -T "guest"
+	fi
+
+	info_layout "memory usage"
+
+	sleep 1
+}
diff --git a/test/lib/setup_ugly b/test/lib/setup_ugly
index 764177e..bcf07ef 100755
--- a/test/lib/setup_ugly
+++ b/test/lib/setup_ugly
@@ -13,6 +13,8 @@
 # Copyright (c) 2022 Red Hat GmbH
 # Author: Stefano Brivio <sbrivio@redhat.com>
 
+INITRAMFS_MEM="${BASEPATH}/mbuto.mem.img"
+
 # setup_distro() - Set up pane layout for distro tests
 setup_distro() {
 	layout_host
@@ -25,6 +27,20 @@ setup_pasta_options() {
 	layout_pasta_simple
 }
 
+# setup_memory() - Start qemu in guest pane, and passt in passt context
+setup_memory() {
+	layout_memory
+
+	pane_or_context_run guest 'qemu-system-$(uname -m)'		   \
+		' -machine accel=kvm'                                      \
+		' -m '${VMEM}' -cpu host -smp '${VCPUS}                    \
+		' -kernel ' "/boot/vmlinuz-$(uname -r)"			   \
+		' -initrd '${INITRAMFS_MEM}' -nographic -serial stdio'	   \
+		' -nodefaults'						   \
+		' -append "console=ttyS0 mitigations=off apparmor=0"'	   \
+		" -pidfile ${STATESETUP}/qemu.pid"
+}
+
 # teardown_distro() - Nothing to do, yet
 teardown_distro() {
 	:
@@ -36,3 +52,7 @@ teardown_pasta_options() {
 	teardown_context_watch ${PANE_PASST} passt
 }
 
+# teardown_passt() - Kill qemu with ^C, remove passt PID file
+teardown_memory() {
+	kill $(cat "${STATESETUP}/qemu.pid")
+}
diff --git a/test/memory/passt b/test/memory/passt
new file mode 100644
index 0000000..fa89821
--- /dev/null
+++ b/test/memory/passt
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: AGPL-3.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# PASTA - Pack A Subtle Tap Abstraction
+#  for network namespace/tap device mode
+#
+# test/memory/passt - Show memory usage of passt in kernel and userspace
+#
+# Copyright (c) 2022 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+gtools	sed cat diff nm sort kill tee head tail chroot unshare mount mkdir cp 
+
+def	meminfo_row
+gout	DIFF meminfo_diff /tmp/meminfo.before /tmp/meminfo.after __WHAT__
+tl	__NAME__
+td	__DIFF__ 3 0 0
+endef
+
+def	meminfo_reverse_row
+gout	DIFF meminfo_diff /tmp/meminfo.after /tmp/meminfo.before __WHAT__
+tl	__NAME__
+td	__DIFF__ 3 0 0
+endef
+
+def	nm_row
+gout	SIZE nm_size /tmp/nm.size __WHAT__
+tl	__WHAT__
+td	__SIZE__ 6 0 0
+endef
+
+def	slab_row
+gout	COUNT slab_diff_count /tmp/slabinfo.before /tmp/slabinfo.after __WHAT__
+gout	SIZE slab_size /tmp/slabinfo.before __WHAT__
+gout	DIFF slab_diff_size /tmp/slabinfo.before /tmp/slabinfo.after __WHAT__
+tl	__WHAT__
+td	__COUNT__ 0 0 0
+td	__SIZE__ 0 0 0
+td	__DIFF__ 6 0 0
+endef
+
+def	start_stop_diff
+guest	sed /proc/slabinfo -ne 's/^\([^ ]* *[^ ]* *[^ ]* *[^ ]*\).*/\\\1/p' > /tmp/slabinfo.before
+guest	cat /proc/meminfo > /tmp/meminfo.before
+guest	/usr/bin/passt.avx2 -l /tmp/log -s /tmp/sock -P /tmp/pid __OPTS__ --netns-only
+sleep	2
+guest	cat /proc/meminfo > /tmp/meminfo.after
+guest	sed /proc/slabinfo -ne 's/^\([^ ]* *[^ ]* *[^ ]* *[^ ]*\).*/\\\1/p' > /tmp/slabinfo.after
+guest	kill \$(cat /tmp/pid)
+guest	diff -y --suppress-common-lines /tmp/meminfo.before /tmp/meminfo.after || :
+guest	nm -td -Sr --size-sort -P /usr/bin/passt.avx2 | head -30 | tee /tmp/nm.size
+guest	sed /proc/slabinfo -ne 's/\(.*<objsize>\).*$/\1/p' | tail -1; (diff -y --suppress-common-lines /tmp/slabinfo.before /tmp/slabinfo.after | sort -grk8)
+endef
+
+def	summary
+info	Memory usage summary
+info	
+th	type MiB
+set	WHAT MemFree
+set	NAME used
+meminfo_reverse_row
+set	WHAT AnonPages
+set	NAME userspace
+meminfo_row
+set	WHAT Slab
+set	NAME kernel
+meminfo_row
+te
+endef
+
+
+guest	mkdir /test
+guest	mount -t tmpfs none /test
+guest	mkdir /test/proc /test/dev /test/tmp
+guest	mount -o bind /proc /test/proc
+guest	mount -o bind /dev /test/dev
+guest	cp -Lr /bin /lib /lib64 /usr /sbin /test/
+
+guest	ulimit -Hn 300000
+guest	unshare -rUm -R /test
+guest	chroot .
+
+guest	meminfo_size() { grep "^$2:" $1 | tr -s ' ' | cut -f2 -d ' '; }
+guest	meminfo_diff() { echo $(( $(meminfo_size $2 $3) - $(meminfo_size $1 $3) )); }
+
+guest	nm_size() { grep -m1 "^$2 " $1 | cut -f4 -d ' '; }
+
+guest	slab_count() { grep "^$2 " $1 | tr -s ' ' | cut -f3 -d ' '; }
+guest	slab_size() { grep "^$2 " $1 | tr -s ' ' | cut -f4 -d ' '; }
+guest	slab_diff_count() { echo $(( $(slab_count $2 $3) - $(slab_count $1 $3) )); }
+guest	slab_diff_size() { echo $(( $(slab_count $2 $3) * $(slab_size $2 $3) - $(slab_count $1 $3) * $(slab_size $1 $3) )); }
+
+
+test	Memory usage: all TCP and UDP ports forwarded, IPv4 and IPv6
+set	OPTS -t all -u all
+start_stop_diff
+summary
+
+info	Userspace memory detail
+info	
+th	symbol MiB
+set	WHAT tcp_buf_discard
+nm_row
+set	WHAT tcp6_l2_buf
+nm_row
+set	WHAT tcp4_l2_buf
+nm_row
+set	WHAT tc
+nm_row
+set	WHAT pkt_buf
+nm_row
+set	WHAT udp_splice_map
+nm_row
+set	WHAT udp6_l2_buf
+nm_row
+set	WHAT udp4_l2_buf
+nm_row
+set	WHAT udp_tap_map
+nm_row
+set	WHAT icmp_id_map
+nm_row
+set	WHAT udp_splice_buf
+nm_row
+set	WHAT tc_hash
+nm_row
+set	WHAT pool_tap6_storage
+nm_row
+set	WHAT pool_tap4_storage
+nm_row
+set	WHAT tap6_l4
+nm_row
+set	WHAT tap4_l4
+nm_row
+te
+
+info	Kernel memory detail
+info	
+th	objects count size MiB
+set	WHAT pid
+slab_row
+set	WHAT dentry
+slab_row
+set	WHAT Acpi-Parse
+slab_row
+set	WHAT kmalloc-64
+slab_row
+set	WHAT kmalloc-32
+slab_row
+set	WHAT lsm_file_cache
+slab_row
+set	WHAT filp
+slab_row
+set	WHAT anon_vma_chain
+slab_row
+set	WHAT ep_head
+slab_row
+set	WHAT sock_inode_cache
+slab_row
+set	WHAT signal_cache
+slab_row
+set	WHAT TCPv6
+slab_row
+set	WHAT TCP
+slab_row
+set	WHAT UDPv6
+slab_row
+te
+
+
+test	Memory usage: all TCP ports forwarded, IPv4
+set	OPTS -t all -4
+start_stop_diff
+summary
+
+
+test	Memory usage: all TCP and UDP ports forwarded, IPv4
+set	OPTS -t all -u all -4
+start_stop_diff
+summary
+
+
+test	Memory usage: no ports forwarded
+set	OPTS -t none -u none
+start_stop_diff
+summary
diff --git a/test/passt.mem.mbuto b/test/passt.mem.mbuto
new file mode 100755
index 0000000..dc06015
--- /dev/null
+++ b/test/passt.mem.mbuto
@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# SPDX-License-Identifier: AGPL-3.0-or-later
+#
+# PASST - Plug A Simple Socket Transport
+#  for qemu/UNIX domain socket mode
+#
+# test/passt.mem.mbuto - mbuto (https://mbuto.sh) profile for memory usage tests
+#
+# Copyright (c) 2022 Red Hat GmbH
+# Author: Stefano Brivio <sbrivio@redhat.com>
+
+PROGS="${PROGS:-ash,dash,bash chmod ip mount insmod mkdir ln cat chmod modprobe
+       grep mknod sed chown sleep bc ls ps mount unshare chroot cp kill diff
+       head tail sort tr tee cut nm which}"
+
+KMODS="${KMODS:- dummy}"
+
+NODES="${NODES:-console kmsg null ptmx random urandom zero}"
+
+LINKS="${LINKS:-
+	 ash,dash,bash		/init
+	 ash,dash,bash		/bin/sh}"
+
+DIRS="${DIRS} /tmp /sbin"
+
+COPIES="${COPIES} ../passt.avx2,/bin/passt.avx2"
+
+FIXUP="${FIXUP}"'
+ln -s /bin /usr/bin
+chmod 777 /tmp
+ip link add eth0 type dummy
+ip link set eth0 up
+ip address add 192.0.2.2/24 dev eth0
+ip address add 2001:db8::2/64 dev eth0
+ip route add default via 192.0.2.1
+ip -6 route add default via 2001:db8::1 dev eth0
+sleep 2
+sh +m
+'
+
+OUTPUT="KERNEL=__KERNEL__
+INITRD=__INITRD__
+"
diff --git a/test/run b/test/run
index c3486b9..e07513f 100755
--- a/test/run
+++ b/test/run
@@ -79,6 +79,10 @@ run() {
 	test pasta_options/log_to_file
 	teardown pasta_options
 
+	setup memory
+	test memory/passt
+	teardown memory
+
 	setup passt
 	test passt/ndp
 	test passt/dhcp
-- 
@@ -79,6 +79,10 @@ run() {
 	test pasta_options/log_to_file
 	teardown pasta_options
 
+	setup memory
+	test memory/passt
+	teardown memory
+
 	setup passt
 	test passt/ndp
 	test passt/dhcp
-- 
2.35.1

Re: [PATCH v4 5/5] test: Add memory/passt test cases

[David Gibson]

[-- Attachment #1: Type: text/plain, Size: 11910 bytes --]

On Thu, Nov 03, 2022 at 07:33:28AM +0100, Stefano Brivio wrote:
> These show a summary of memory usage in kernel and userspace with
> different port forwarding configurations, details of userspace usage
> using 'nm' (passt only uses statically allocated memory), and details
> of kernel memory from slab reporting facilities.
> 
> This adds a new test image, mbuto.mem.img, with harcoded IPv4 and
> IPv6 addresses and routes, and just the tools we need to start and
> stop passt, to report from /proc/slabinfo, /proc/meminfo, and to
> print and parse symbol sizes using nm(1).
> 
> passt can't pivot_root() for sandboxing purposes on ramfs, so we need
> to create another filesystem and chroot into it, first.
> 
> We don't want to use pane context functions, as we're checking memory
> usage for sockets: resort to screen-scraping.
> 
> Configure a dummy interface to provide passt with an appearance of
> working IPv4 and IPv6 connectivity, contributed by David.
> 
> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>

> ---
>  test/Makefile        |   5 +-
>  test/lib/layout_ugly |  30 +++++++
>  test/lib/setup_ugly  |  20 +++++
>  test/memory/passt    | 187 +++++++++++++++++++++++++++++++++++++++++++
>  test/passt.mem.mbuto |  44 ++++++++++
>  test/run             |   4 +
>  6 files changed, 289 insertions(+), 1 deletion(-)
>  create mode 100644 test/memory/passt
>  create mode 100755 test/passt.mem.mbuto
> 
> diff --git a/test/Makefile b/test/Makefile
> index 91498ff..9f2bc42 100644
> --- a/test/Makefile
> +++ b/test/Makefile
> @@ -55,7 +55,7 @@ UBUNTU_IMGS = $(UBUNTU_OLD_IMGS) $(UBUNTU_NEW_IMGS)
>  DOWNLOAD_ASSETS = mbuto \
>  	$(DEBIAN_IMGS) $(FEDORA_IMGS) $(OPENSUSE_IMGS) $(UBUNTU_IMGS)
>  TESTDATA_ASSETS = small.bin big.bin medium.bin
> -LOCAL_ASSETS = mbuto.img QEMU_EFI.fd \
> +LOCAL_ASSETS = mbuto.img mbuto.mem.img QEMU_EFI.fd \
>  	$(DEBIAN_IMGS:%=prepared-%) $(FEDORA_IMGS:%=prepared-%) \
>  	$(UBUNTU_NEW_IMGS:%=prepared-%) \
>  	nsholder guest-key guest-key.pub \
> @@ -76,6 +76,9 @@ guest-key guest-key.pub:
>  mbuto.img: passt.mbuto mbuto guest-key.pub $(TESTDATA_ASSETS)
>  	./mbuto/mbuto -p ./$< -c lz4 -f $@
>  
> +mbuto.mem.img: passt.mem.mbuto mbuto ../passt.avx2
> +	./mbuto/mbuto -p ./$< -c lz4 -f $@
> +
>  nsholder: nsholder.c
>  	$(CC) $(CFLAGS) -o $@ $^
>  
> diff --git a/test/lib/layout_ugly b/test/lib/layout_ugly
> index 9397b7d..22f6169 100644
> --- a/test/lib/layout_ugly
> +++ b/test/lib/layout_ugly
> @@ -81,3 +81,33 @@ layout_pasta_simple() {
>  
>  	sleep 1
>  }
> +
> +# layout_memory() - Screen-scraped panes for memory usage tests, big guest pane
> +layout_memory() {
> +	sleep 3
> +
> +	tmux kill-pane -a -t 0
> +	cmd_write 0 clear
> +
> +	tmux split-window -h -l '35%' -t passt_test
> +
> +	PANE_GUEST=0
> +	PANE_INFO=1
> +
> +	get_info_cols
> +
> +	tmux send-keys -l -t ${PANE_INFO} 'while cat '"$STATEBASE/log_pipe"'; do :; done'
> +	tmux send-keys -t ${PANE_INFO} -N 100 C-m
> +	tmux select-pane -t ${PANE_INFO} -T "test log"
> +
> +	if context_exists guest; then
> +		pane_watch_contexts ${PANE_GUEST} guest guest
> +	else
> +		tmux pipe-pane -O -t ${PANE_GUEST} "cat >> ${LOGDIR}/pane_guest.log"
> +		tmux select-pane -t ${PANE_GUEST} -T "guest"
> +	fi
> +
> +	info_layout "memory usage"
> +
> +	sleep 1
> +}
> diff --git a/test/lib/setup_ugly b/test/lib/setup_ugly
> index 764177e..bcf07ef 100755
> --- a/test/lib/setup_ugly
> +++ b/test/lib/setup_ugly
> @@ -13,6 +13,8 @@
>  # Copyright (c) 2022 Red Hat GmbH
>  # Author: Stefano Brivio <sbrivio@redhat.com>
>  
> +INITRAMFS_MEM="${BASEPATH}/mbuto.mem.img"
> +
>  # setup_distro() - Set up pane layout for distro tests
>  setup_distro() {
>  	layout_host
> @@ -25,6 +27,20 @@ setup_pasta_options() {
>  	layout_pasta_simple
>  }
>  
> +# setup_memory() - Start qemu in guest pane, and passt in passt context
> +setup_memory() {
> +	layout_memory
> +
> +	pane_or_context_run guest 'qemu-system-$(uname -m)'		   \
> +		' -machine accel=kvm'                                      \
> +		' -m '${VMEM}' -cpu host -smp '${VCPUS}                    \
> +		' -kernel ' "/boot/vmlinuz-$(uname -r)"			   \
> +		' -initrd '${INITRAMFS_MEM}' -nographic -serial stdio'	   \
> +		' -nodefaults'						   \
> +		' -append "console=ttyS0 mitigations=off apparmor=0"'	   \
> +		" -pidfile ${STATESETUP}/qemu.pid"
> +}
> +
>  # teardown_distro() - Nothing to do, yet
>  teardown_distro() {
>  	:
> @@ -36,3 +52,7 @@ teardown_pasta_options() {
>  	teardown_context_watch ${PANE_PASST} passt
>  }
>  
> +# teardown_passt() - Kill qemu with ^C, remove passt PID file
> +teardown_memory() {
> +	kill $(cat "${STATESETUP}/qemu.pid")
> +}
> diff --git a/test/memory/passt b/test/memory/passt
> new file mode 100644
> index 0000000..fa89821
> --- /dev/null
> +++ b/test/memory/passt
> @@ -0,0 +1,187 @@
> +# SPDX-License-Identifier: AGPL-3.0-or-later
> +#
> +# PASST - Plug A Simple Socket Transport
> +#  for qemu/UNIX domain socket mode
> +#
> +# PASTA - Pack A Subtle Tap Abstraction
> +#  for network namespace/tap device mode
> +#
> +# test/memory/passt - Show memory usage of passt in kernel and userspace
> +#
> +# Copyright (c) 2022 Red Hat GmbH
> +# Author: Stefano Brivio <sbrivio@redhat.com>
> +
> +gtools	sed cat diff nm sort kill tee head tail chroot unshare mount mkdir cp 
> +
> +def	meminfo_row
> +gout	DIFF meminfo_diff /tmp/meminfo.before /tmp/meminfo.after __WHAT__
> +tl	__NAME__
> +td	__DIFF__ 3 0 0
> +endef
> +
> +def	meminfo_reverse_row
> +gout	DIFF meminfo_diff /tmp/meminfo.after /tmp/meminfo.before __WHAT__
> +tl	__NAME__
> +td	__DIFF__ 3 0 0
> +endef
> +
> +def	nm_row
> +gout	SIZE nm_size /tmp/nm.size __WHAT__
> +tl	__WHAT__
> +td	__SIZE__ 6 0 0
> +endef
> +
> +def	slab_row
> +gout	COUNT slab_diff_count /tmp/slabinfo.before /tmp/slabinfo.after __WHAT__
> +gout	SIZE slab_size /tmp/slabinfo.before __WHAT__
> +gout	DIFF slab_diff_size /tmp/slabinfo.before /tmp/slabinfo.after __WHAT__
> +tl	__WHAT__
> +td	__COUNT__ 0 0 0
> +td	__SIZE__ 0 0 0
> +td	__DIFF__ 6 0 0
> +endef
> +
> +def	start_stop_diff
> +guest	sed /proc/slabinfo -ne 's/^\([^ ]* *[^ ]* *[^ ]* *[^ ]*\).*/\\\1/p' > /tmp/slabinfo.before
> +guest	cat /proc/meminfo > /tmp/meminfo.before
> +guest	/usr/bin/passt.avx2 -l /tmp/log -s /tmp/sock -P /tmp/pid __OPTS__ --netns-only
> +sleep	2
> +guest	cat /proc/meminfo > /tmp/meminfo.after
> +guest	sed /proc/slabinfo -ne 's/^\([^ ]* *[^ ]* *[^ ]* *[^ ]*\).*/\\\1/p' > /tmp/slabinfo.after
> +guest	kill \$(cat /tmp/pid)
> +guest	diff -y --suppress-common-lines /tmp/meminfo.before /tmp/meminfo.after || :
> +guest	nm -td -Sr --size-sort -P /usr/bin/passt.avx2 | head -30 | tee /tmp/nm.size
> +guest	sed /proc/slabinfo -ne 's/\(.*<objsize>\).*$/\1/p' | tail -1; (diff -y --suppress-common-lines /tmp/slabinfo.before /tmp/slabinfo.after | sort -grk8)
> +endef
> +
> +def	summary
> +info	Memory usage summary
> +info	
> +th	type MiB
> +set	WHAT MemFree
> +set	NAME used
> +meminfo_reverse_row
> +set	WHAT AnonPages
> +set	NAME userspace
> +meminfo_row
> +set	WHAT Slab
> +set	NAME kernel
> +meminfo_row
> +te
> +endef
> +
> +
> +guest	mkdir /test
> +guest	mount -t tmpfs none /test
> +guest	mkdir /test/proc /test/dev /test/tmp
> +guest	mount -o bind /proc /test/proc
> +guest	mount -o bind /dev /test/dev
> +guest	cp -Lr /bin /lib /lib64 /usr /sbin /test/
> +
> +guest	ulimit -Hn 300000
> +guest	unshare -rUm -R /test
> +guest	chroot .
> +
> +guest	meminfo_size() { grep "^$2:" $1 | tr -s ' ' | cut -f2 -d ' '; }
> +guest	meminfo_diff() { echo $(( $(meminfo_size $2 $3) - $(meminfo_size $1 $3) )); }
> +
> +guest	nm_size() { grep -m1 "^$2 " $1 | cut -f4 -d ' '; }
> +
> +guest	slab_count() { grep "^$2 " $1 | tr -s ' ' | cut -f3 -d ' '; }
> +guest	slab_size() { grep "^$2 " $1 | tr -s ' ' | cut -f4 -d ' '; }
> +guest	slab_diff_count() { echo $(( $(slab_count $2 $3) - $(slab_count $1 $3) )); }
> +guest	slab_diff_size() { echo $(( $(slab_count $2 $3) * $(slab_size $2 $3) - $(slab_count $1 $3) * $(slab_size $1 $3) )); }
> +
> +
> +test	Memory usage: all TCP and UDP ports forwarded, IPv4 and IPv6
> +set	OPTS -t all -u all
> +start_stop_diff
> +summary
> +
> +info	Userspace memory detail
> +info	
> +th	symbol MiB
> +set	WHAT tcp_buf_discard
> +nm_row
> +set	WHAT tcp6_l2_buf
> +nm_row
> +set	WHAT tcp4_l2_buf
> +nm_row
> +set	WHAT tc
> +nm_row
> +set	WHAT pkt_buf
> +nm_row
> +set	WHAT udp_splice_map
> +nm_row
> +set	WHAT udp6_l2_buf
> +nm_row
> +set	WHAT udp4_l2_buf
> +nm_row
> +set	WHAT udp_tap_map
> +nm_row
> +set	WHAT icmp_id_map
> +nm_row
> +set	WHAT udp_splice_buf
> +nm_row
> +set	WHAT tc_hash
> +nm_row
> +set	WHAT pool_tap6_storage
> +nm_row
> +set	WHAT pool_tap4_storage
> +nm_row
> +set	WHAT tap6_l4
> +nm_row
> +set	WHAT tap4_l4
> +nm_row
> +te
> +
> +info	Kernel memory detail
> +info	
> +th	objects count size MiB
> +set	WHAT pid
> +slab_row
> +set	WHAT dentry
> +slab_row
> +set	WHAT Acpi-Parse
> +slab_row
> +set	WHAT kmalloc-64
> +slab_row
> +set	WHAT kmalloc-32
> +slab_row
> +set	WHAT lsm_file_cache
> +slab_row
> +set	WHAT filp
> +slab_row
> +set	WHAT anon_vma_chain
> +slab_row
> +set	WHAT ep_head
> +slab_row
> +set	WHAT sock_inode_cache
> +slab_row
> +set	WHAT signal_cache
> +slab_row
> +set	WHAT TCPv6
> +slab_row
> +set	WHAT TCP
> +slab_row
> +set	WHAT UDPv6
> +slab_row
> +te
> +
> +
> +test	Memory usage: all TCP ports forwarded, IPv4
> +set	OPTS -t all -4
> +start_stop_diff
> +summary
> +
> +
> +test	Memory usage: all TCP and UDP ports forwarded, IPv4
> +set	OPTS -t all -u all -4
> +start_stop_diff
> +summary
> +
> +
> +test	Memory usage: no ports forwarded
> +set	OPTS -t none -u none
> +start_stop_diff
> +summary
> diff --git a/test/passt.mem.mbuto b/test/passt.mem.mbuto
> new file mode 100755
> index 0000000..dc06015
> --- /dev/null
> +++ b/test/passt.mem.mbuto
> @@ -0,0 +1,44 @@
> +#!/bin/sh
> +#
> +# SPDX-License-Identifier: AGPL-3.0-or-later
> +#
> +# PASST - Plug A Simple Socket Transport
> +#  for qemu/UNIX domain socket mode
> +#
> +# test/passt.mem.mbuto - mbuto (https://mbuto.sh) profile for memory usage tests
> +#
> +# Copyright (c) 2022 Red Hat GmbH
> +# Author: Stefano Brivio <sbrivio@redhat.com>
> +
> +PROGS="${PROGS:-ash,dash,bash chmod ip mount insmod mkdir ln cat chmod modprobe
> +       grep mknod sed chown sleep bc ls ps mount unshare chroot cp kill diff
> +       head tail sort tr tee cut nm which}"
> +
> +KMODS="${KMODS:- dummy}"
> +
> +NODES="${NODES:-console kmsg null ptmx random urandom zero}"
> +
> +LINKS="${LINKS:-
> +	 ash,dash,bash		/init
> +	 ash,dash,bash		/bin/sh}"
> +
> +DIRS="${DIRS} /tmp /sbin"
> +
> +COPIES="${COPIES} ../passt.avx2,/bin/passt.avx2"
> +
> +FIXUP="${FIXUP}"'
> +ln -s /bin /usr/bin
> +chmod 777 /tmp
> +ip link add eth0 type dummy
> +ip link set eth0 up
> +ip address add 192.0.2.2/24 dev eth0
> +ip address add 2001:db8::2/64 dev eth0
> +ip route add default via 192.0.2.1
> +ip -6 route add default via 2001:db8::1 dev eth0
> +sleep 2
> +sh +m
> +'
> +
> +OUTPUT="KERNEL=__KERNEL__
> +INITRD=__INITRD__
> +"
> diff --git a/test/run b/test/run
> index c3486b9..e07513f 100755
> --- a/test/run
> +++ b/test/run
> @@ -79,6 +79,10 @@ run() {
>  	test pasta_options/log_to_file
>  	teardown pasta_options
>  
> +	setup memory
> +	test memory/passt
> +	teardown memory
> +
>  	setup passt
>  	test passt/ndp
>  	test passt/dhcp

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]