On Fri, Sep 09, 2022 at 05:18:48PM +0200, Stefano Brivio wrote:
> Nit:
> 
> On Thu,  8 Sep 2022 11:49:14 +1000
> David Gibson <david(a)gibson.dropbear.id.au> wrote:
> 
> > Convert most of the tests to use the new-style system for issuing commands
> > for all host commands.  We leave the distro tests for now: they use
> > the same pane for both host and guest commands which we'll need some more
> > things to deal with.
> > 
> > Signed-off-by: David Gibson <david(a)gibson.dropbear.id.au>
> > ---
> >  test/lib/layout | 20 ++++++++++----------
> >  test/lib/setup  | 47 ++++++++++++++++++++++++++++++++---------------
> >  2 files changed, 42 insertions(+), 25 deletions(-)
> > 
> > diff --git a/test/lib/layout b/test/lib/layout
> > index 2d6b197..09c213a 100644
> > --- a/test/lib/layout
> > +++ b/test/lib/layout
> > @@ -31,8 +31,12 @@ layout_host() {
> >  	tmux send-keys -t ${PANE_INFO} -N 100 C-m
> >  	tmux select-pane -t ${PANE_INFO} -T "test log"
> >  
> > -	tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
> > -	tmux select-pane -t ${PANE_HOST} -T "host"
> > +	if context_exists host; then
> > +	    pane_watch_contexts 0 host host
> > +	else
> > +	    tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
> > +	    tmux select-pane -t ${PANE_HOST} -T "host"
> > +	fi
> >  
> >  	info_layout "host commands only"
> >  
> > @@ -64,8 +68,7 @@ layout_pasta() {
> >  	tmux send-keys -t ${PANE_INFO} -N 100 C-m
> >  	tmux select-pane -t ${PANE_INFO} -T "test log"
> >  
> > -	tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
> > -	tmux select-pane -t ${PANE_HOST} -T "host"
> > +	pane_watch_contexts ${PANE_HOST} host host
> >  
> >  	tmux pipe-pane -O -t ${PANE_PASST} "cat >> ${LOGDIR}/pane_passt.log"
> >  	tmux select-pane -t ${PANE_PASST} -T "pasta"
> > @@ -100,8 +103,7 @@ layout_passt() {
> >  	tmux send-keys -t ${PANE_INFO} -N 100 C-m
> >  	tmux select-pane -t ${PANE_INFO} -T "test log"
> >  
> > -	tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
> > -	tmux select-pane -t ${PANE_HOST} -T "host"
> > +	pane_watch_contexts ${PANE_HOST} host host
> >  
> >  	tmux pipe-pane -O -t ${PANE_PASST} "cat >> ${LOGDIR}/pane_passt.log"
> >  	tmux select-pane -t ${PANE_PASST} -T "passt"
> > @@ -141,8 +143,7 @@ layout_passt_in_pasta() {
> >  	tmux send-keys -t ${PANE_INFO} -N 100 C-m
> >  	tmux select-pane -t ${PANE_INFO} -T "test log"
> >  
> > -	tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
> > -	tmux select-pane -t ${PANE_HOST} -T "host"
> > +	pane_watch_contexts ${PANE_HOST} host host
> >  
> >  	tmux pipe-pane -O -t ${PANE_PASST} "cat >> ${LOGDIR}/pane_passt.log"
> >  	tmux select-pane -t ${PANE_PASST} -T "passt in pasta (namespace)"
> > @@ -189,8 +190,7 @@ layout_two_guests() {
> >  	tmux send-keys -t ${PANE_INFO} -N 100 C-m
> >  	tmux select-pane -t ${PANE_INFO} -T "test log"
> >  
> > -	tmux pipe-pane -O -t ${PANE_HOST} "cat >> ${LOGDIR}/pane_host.log"
> > -	tmux select-pane -t ${PANE_HOST} -T "host"
> > +	pane_watch_contexts ${PANE_HOST} host host
> >  
> >  	tmux pipe-pane -O -t ${PANE_PASST_1} "cat >> ${LOGDIR}/pane_passt_1.log"
> >  	tmux select-pane -t ${PANE_PASST_1} -T "passt #1 in namespace #1"
> > diff --git a/test/lib/setup b/test/lib/setup
> > index 42f03c1..9b5e9ff 100755
> > --- a/test/lib/setup
> > +++ b/test/lib/setup
> > @@ -20,6 +20,8 @@ VMEM="$((${__mem_kib} / 1024 / 4))"
> >  
> >  # setup_build() - Set up pane layout for build tests
> >  setup_build() {
> > +	context_setup_host host
> > +
> >  	layout_host
> >  }
> >  
> > @@ -30,6 +32,8 @@ setup_distro() {
> >  
> >  # setup_passt() - Start qemu and passt
> >  setup_passt() {
> > +	context_setup_host host
> > +
> >  	layout_passt
> >  
> >  	# Ports:
> > @@ -63,17 +67,12 @@ setup_passt() {
> >  		" -netdev socket,fd=5,id=hostnet0"			   \
> >  		' -pidfile passt_qemu.pid'
> >  	pane_status GUEST
> > -
> > -	# Set things up to reduce problems parsing host command output
> > -	pane_run HOST "PS1='$ '"
> > -	pane_wait HOST
> > -	# Non-bash shells will fail this, but also don't need it, so ignore errors
> > -	pane_run HOST "bind 'set enable-bracketed-paste off'"
> > -	pane_wait HOST
> >  }
> >  
> >  # setup_pasta() - Create a network and user namespace, connect pasta to it
> >  setup_pasta() {
> > +	context_setup_host host
> > +
> >  	layout_pasta
> >  
> >  	pane_run NS 'echo $$'
> > @@ -105,6 +104,8 @@ setup_pasta() {
> >  
> >  # setup_passt_in_ns() - Set up namespace (with pasta), run qemu and passt into it
> >  setup_passt_in_ns() {
> > +	context_setup_host host
> > +
> >  	layout_passt_in_pasta
> >  
> >  	# Ports:
> > @@ -182,17 +183,12 @@ setup_passt_in_ns() {
> >  		" -netdev socket,fd=5,id=hostnet0"			   \
> >  		' -pidfile passt_in_ns_qemu.pid'
> >  	pane_status GUEST
> > -
> > -	# Set things up to reduce problems parsing host command output
> > -	pane_run HOST "PS1='$ '"
> > -	pane_wait HOST
> > -	# Non-bash shells will fail this, but also don't need it, so ignore errors
> > -	pane_run HOST "bind 'set enable-bracketed-paste off'"
> > -	pane_wait HOST
> >  }
> >  
> >  # setup_two_guests() - Set up two namespace, run qemu and passt in both of them
> >  setup_two_guests() {
> > +	context_setup_host host
> > +
> >  	layout_two_guests
> >  
> >  	# Ports:
> > @@ -290,9 +286,21 @@ setup_two_guests() {
> >  	pane_status GUEST_2
> >  }
> >  
> > +# teardown_context_watch() - Remove contexts and stop panes watching them
> > +# $1:	Pane number watching
> > +# $@:	Context names
> > +teardown_context_watch() {
> > +	__pane="$1"
> > +	shift
> > +	for __c ; do
> 
> Whitespace between ; and do is the most common coding style from POSIX
> references, but otherwise inconsistent with everything else in these
> files (and, say, with pane_watch_contexts() in 3/11) -- I'd drop it.

Adjusted, thanks.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson