From: David Gibson <david@gibson.dropbear.id.au>
To: Stefano Brivio <sbrivio@redhat.com>
Cc: passt-dev@passt.top, Laurent Vivier <lvivier@redhat.com>
Subject: Re: [PATCH v2 5/8] Introduce facilities for guest migration on top of vhost-user infrastructure
Date: Wed, 29 Jan 2025 16:41:01 +1100 [thread overview]
Message-ID: <Z5m_bd_059N9M-Vp@zatzit> (raw)
In-Reply-To: <20250128233940.1235855-6-sbrivio@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 20507 bytes --]
On Wed, Jan 29, 2025 at 12:39:37AM +0100, Stefano Brivio wrote:
> Add two sets (source or target) of three functions each for passt in
> vhost-user mode, triggered by activity on the file descriptor passed
> via VHOST_USER_PROTOCOL_F_DEVICE_STATE:
>
> - migrate_source_pre() and migrate_target_pre() are called to prepare
> for migration, before data is transferred
>
> - migrate_source() sends, and migrate_target() receives migration data
>
> - migrate_source_post() and migrate_target_post() are responsible for
> any post-migration task
>
> Callbacks are added to these functions with arrays of function
> pointers in migrate.c. Migration handlers are versioned.
>
> Versioned descriptions of data sections will be added to the
> data_versions array, which points to versioned iovec arrays. Version
> 1 is currently empty and will be filled in in subsequent patches.
>
> The source announces the data version to be used and informs the peer
> about endianness, and the size of void *, time_t, flow entries and
> flow hash table entries.
>
> The target checks if the version of the source is still supported. If
> it's not, it aborts the migration.
>
> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tomorrow, I'm planning to try implementing a bunch of the suggestions
I have below.
> ---
> Makefile | 12 +--
> migrate.c | 264 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> migrate.h | 88 ++++++++++++++++++
> passt.c | 2 +-
> vu_common.c | 124 ++++++++++++++++--------
> vu_common.h | 2 +-
> 6 files changed, 443 insertions(+), 49 deletions(-)
> create mode 100644 migrate.c
> create mode 100644 migrate.h
>
> diff --git a/Makefile b/Makefile
> index 464eef1..1383875 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -38,8 +38,8 @@ FLAGS += -DDUAL_STACK_SOCKETS=$(DUAL_STACK_SOCKETS)
>
> PASST_SRCS = arch.c arp.c checksum.c conf.c dhcp.c dhcpv6.c flow.c fwd.c \
> icmp.c igmp.c inany.c iov.c ip.c isolation.c lineread.c log.c mld.c \
> - ndp.c netlink.c packet.c passt.c pasta.c pcap.c pif.c tap.c tcp.c \
> - tcp_buf.c tcp_splice.c tcp_vu.c udp.c udp_flow.c udp_vu.c util.c \
> + ndp.c netlink.c migrate.c packet.c passt.c pasta.c pcap.c pif.c tap.c \
> + tcp.c tcp_buf.c tcp_splice.c tcp_vu.c udp.c udp_flow.c udp_vu.c util.c \
> vhost_user.c virtio.c vu_common.c
> QRAP_SRCS = qrap.c
> SRCS = $(PASST_SRCS) $(QRAP_SRCS)
> @@ -48,10 +48,10 @@ MANPAGES = passt.1 pasta.1 qrap.1
>
> PASST_HEADERS = arch.h arp.h checksum.h conf.h dhcp.h dhcpv6.h flow.h fwd.h \
> flow_table.h icmp.h icmp_flow.h inany.h iov.h ip.h isolation.h \
> - lineread.h log.h ndp.h netlink.h packet.h passt.h pasta.h pcap.h pif.h \
> - siphash.h tap.h tcp.h tcp_buf.h tcp_conn.h tcp_internal.h tcp_splice.h \
> - tcp_vu.h udp.h udp_flow.h udp_internal.h udp_vu.h util.h vhost_user.h \
> - virtio.h vu_common.h
> + lineread.h log.h migrate.h ndp.h netlink.h packet.h passt.h pasta.h \
> + pcap.h pif.h siphash.h tap.h tcp.h tcp_buf.h tcp_conn.h tcp_internal.h \
> + tcp_splice.h tcp_vu.h udp.h udp_flow.h udp_internal.h udp_vu.h util.h \
> + vhost_user.h virtio.h vu_common.h
> HEADERS = $(PASST_HEADERS) seccomp.h
>
> C := \#include <sys/random.h>\nint main(){int a=getrandom(0, 0, 0);}
> diff --git a/migrate.c b/migrate.c
> new file mode 100644
> index 0000000..b8b79e0
> --- /dev/null
> +++ b/migrate.c
> @@ -0,0 +1,264 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +/* PASST - Plug A Simple Socket Transport
> + * for qemu/UNIX domain socket mode
> + *
> + * PASTA - Pack A Subtle Tap Abstraction
> + * for network namespace/tap device mode
> + *
> + * migrate.c - Migration sections, layout, and routines
> + *
> + * Copyright (c) 2025 Red Hat GmbH
> + * Author: Stefano Brivio <sbrivio@redhat.com>
> + */
> +
> +#include <errno.h>
> +#include <sys/uio.h>
> +
> +#include "util.h"
> +#include "ip.h"
> +#include "passt.h"
> +#include "inany.h"
> +#include "flow.h"
> +#include "flow_table.h"
> +
> +#include "migrate.h"
> +
> +/* Current version of migration data */
> +#define MIGRATE_VERSION 1
> +
> +/* Magic as we see it and as seen with reverse endianness */
> +#define MIGRATE_MAGIC 0xB1BB1D1B0BB1D1B0
> +#define MIGRATE_MAGIC_SWAPPED 0xB0D1B1B01B1DBBB1
> +
> +/* Migration header to send from source */
> +static union migrate_header header = {
> + .magic = MIGRATE_MAGIC,
> + .version = htonl_constant(MIGRATE_VERSION),
> + .time_t_size = htonl_constant(sizeof(time_t)),
> + .flow_size = htonl_constant(sizeof(union flow)),
> + .flow_sidx_size = htonl_constant(sizeof(struct flow_sidx)),
> + .voidp_size = htonl_constant(sizeof(void *)),
> +};
> +
> +/* Data sections for version 1 */
> +static struct iovec sections_v1[] = {
> + { &header, sizeof(header) },
This format assumes that everything we send is in buffers with
statically known size and address. I'm pretty sure we'll outgrow that
quickly. For one thing, I realised we want to transfer addr*_seen, or
we won't know how to direct an incoming connection after migration, if
that occurs before the guest sends anything outgoing.
> +};
> +
> +/* Set of data versions */
> +static struct migrate_data data_versions[] = {
> + {
> + 1, sections_v1,
> + },
I realise it's a bit less "declarative", but maybe just a "receive"
function for each version which open codes sending each section would
be more flexible, and not that much more verbose.
> + { 0 },
> +};
> +
> +/* Handlers to call in source before sending data */
> +struct migrate_handler handlers_source_pre[] = {
> + { 0 },
> +};
> +
> +/* Handlers to call in source after sending data */
> +struct migrate_handler handlers_source_post[] = {
> + { 0 },
> +};
I also wonder if these tables of handlers are overkill, rather than
just having a function that calls all the things in the right order.
> +
> +/* Handlers to call in target before receiving data with version 1 */
> +struct migrate_handler handlers_target_pre_v1[] = {
> + { 0 },
> +};
> +
> +/* Handlers to call in target after receiving data with version 1 */
> +struct migrate_handler handlers_target_post_v1[] = {
> + { 0 },
> +};
> +
> +/* Versioned sets of migration handlers */
> +struct migrate_target_handlers target_handlers[] = {
> + {
> + 1,
> + handlers_target_pre_v1,
> + handlers_target_post_v1,
> + },
> + { 0 },
> +};
> +
> +/**
> + * migrate_source_pre() - Pre-migration tasks as source
> + * @c: Execution context
> + * @m: Migration metadata
> + *
> + * Return: 0 on success, error code on failure
> + */
> +int migrate_source_pre(struct ctx *c, struct migrate_meta *m)
> +{
> + struct migrate_handler *h;
> +
> + for (h = handlers_source_pre; h->fn; h++) {
> + int rc;
> +
> + if ((rc = h->fn(c, m)))
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * migrate_source() - Perform migration as source: send state to hypervisor
> + * @fd: Descriptor for state transfer
> + * @m: Migration metadata
> + *
> + * Return: 0 on success, error code on failure
> + */
> +int migrate_source(int fd, const struct migrate_meta *m)
> +{
> + static struct migrate_data *d;
> + int count, rc;
> +
> + (void)m;
> +
> + for (d = data_versions; d->v != MIGRATE_VERSION; d++);
> +
> + for (count = 0; d->sections[count].iov_len; count++);
> +
> + debug("Writing %u migration sections", count - 1 /* minus header */);
> + rc = write_remainder(fd, d->sections, count, 0);
> + if (rc < 0)
> + return errno;
> +
> + return 0;
> +}
> +
> +/**
> + * migrate_source_post() - Post-migration tasks as source
> + * @c: Execution context
> + * @m: Migration metadata
> + *
> + * Return: 0 on success, error code on failure
> + */
> +void migrate_source_post(struct ctx *c, struct migrate_meta *m)
> +{
> + struct migrate_handler *h;
> +
> + for (h = handlers_source_post; h->fn; h++)
> + h->fn(c, m);
> +}
> +
> +/**
> + * migrate_target_read_header() - Set metadata in target from source header
> + * @fd: Descriptor for state transfer
> + * @m: Migration metadata, filled on return
> + *
> + * Return: 0 on success, error code on failure
> + */
> +int migrate_target_read_header(int fd, struct migrate_meta *m)
> +{
> + static struct migrate_data *d;
> + union migrate_header h;
> +
> + if (read_all_buf(fd, &h, sizeof(h)))
> + return errno;
> +
> + debug("Source magic: 0x%016" PRIx64 ", sizeof(void *): %u, version: %u",
> + h.magic, ntohl(h.voidp_size), ntohl(h.version));
> +
> + for (d = data_versions; d->v != ntohl(h.version) && d->v; d++);
> + if (!d->v)
> + return ENOTSUP;
> + m->v = d->v;
> +
> + if (h.magic == MIGRATE_MAGIC)
> + m->bswap = false;
> + else if (h.magic == MIGRATE_MAGIC_SWAPPED)
> + m->bswap = true;
> + else
> + return ENOTSUP;
> +
> + if (ntohl(h.voidp_size) == 4)
> + m->source_64b = false;
> + else if (ntohl(h.voidp_size) == 8)
> + m->source_64b = true;
> + else
> + return ENOTSUP;
> +
> + if (ntohl(h.time_t_size) == 4)
> + m->time_64b = false;
> + else if (ntohl(h.time_t_size) == 8)
> + m->time_64b = true;
> + else
> + return ENOTSUP;
> +
> + m->flow_size = ntohl(h.flow_size);
> + m->flow_sidx_size = ntohl(h.flow_sidx_size);
> +
> + return 0;
> +}
> +
> +/**
> + * migrate_target_pre() - Pre-migration tasks as target
> + * @c: Execution context
> + * @m: Migration metadata
> + *
> + * Return: 0 on success, error code on failure
> + */
> +int migrate_target_pre(struct ctx *c, struct migrate_meta *m)
> +{
> + struct migrate_target_handlers *th;
> + struct migrate_handler *h;
> +
> + for (th = target_handlers; th->v != m->v && th->v; th++);
> +
> + for (h = th->pre; h->fn; h++) {
> + int rc;
> +
> + if ((rc = h->fn(c, m)))
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * migrate_target() - Perform migration as target: receive state from hypervisor
> + * @fd: Descriptor for state transfer
> + * @m: Migration metadata
> + *
> + * Return: 0 on success, error code on failure
> + *
> + * #syscalls:vu readv
> + */
> +int migrate_target(int fd, const struct migrate_meta *m)
> +{
> + static struct migrate_data *d;
> + unsigned cnt;
> + int rc;
> +
> + for (d = data_versions; d->v != m->v && d->v; d++);
> +
> + for (cnt = 0; d->sections[cnt + 1 /* skip header */].iov_len; cnt++);
> +
> + debug("Reading %u migration sections", cnt);
> + rc = read_remainder(fd, d->sections + 1, cnt, 0);
> + if (rc < 0)
> + return errno;
> +
> + return 0;
> +}
> +
> +/**
> + * migrate_target_post() - Post-migration tasks as target
> + * @c: Execution context
> + * @m: Migration metadata
> + */
> +void migrate_target_post(struct ctx *c, struct migrate_meta *m)
> +{
> + struct migrate_target_handlers *th;
> + struct migrate_handler *h;
> +
> + for (th = target_handlers; th->v != m->v && th->v; th++);
> +
> + for (h = th->post; h->fn; h++)
> + h->fn(c, m);
> +}
> diff --git a/migrate.h b/migrate.h
> new file mode 100644
> index 0000000..f9635ac
> --- /dev/null
> +++ b/migrate.h
> @@ -0,0 +1,88 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later
> + * Copyright (c) 2025 Red Hat GmbH
> + * Author: Stefano Brivio <sbrivio@redhat.com>
> + */
> +
> +#ifndef MIGRATE_H
> +#define MIGRATE_H
> +
> +/**
> + * struct migrate_meta - Migration metadata
> + * @v: Chosen migration data version, host order
> + * @bswap: Source has opposite endianness
> + * @peer_64b: Source uses 64-bit void *
> + * @time_64b: Source uses 64-bit time_t
> + * @flow_size: Size of union flow in source
> + * @flow_sidx_size: Size of struct flow_sidx in source
> + */
> +struct migrate_meta {
> + uint32_t v;
> + bool bswap;
> + bool source_64b;
> + bool time_64b;
> + size_t flow_size;
> + size_t flow_sidx_size;
> +};
> +
> +/**
> + * union migrate_header - Migration header from source
> + * @magic: 0xB1BB1D1B0BB1D1B0, host order
> + * @version: Source sends highest known, target aborts if unsupported
> + * @voidp_size: sizeof(void *), network order
> + * @time_t_size: sizeof(time_t), network order
> + * @flow_size: sizeof(union flow), network order
> + * @flow_sidx_size: sizeof(struct flow_sidx_t), network order
> + * @unused: Go figure
> + */
> +union migrate_header {
> + struct {
> + uint64_t magic;
> + uint32_t version;
> + uint32_t voidp_size;
> + uint32_t time_t_size;
> + uint32_t flow_size;
> + uint32_t flow_sidx_size;
> + };
> + uint8_t unused[65536];
> +};
> +
> +/**
> + * struct migrate_data - Data sections for given source version
> + * @v: Source version this applies to, host order
> + * @sections: Array of data sections, NULL-terminated
> + */
> +struct migrate_data {
> + uint32_t v;
> + struct iovec *sections;
> +};
> +
> +/**
> + * struct migrate_handler - Function to handle a specific data section
> + * @fn: Function pointer taking pointer to context and metadata
> + */
> +struct migrate_handler {
> + int (*fn)(struct ctx *c, struct migrate_meta *m);
> +};
> +
> +/**
> + * struct migrate_target_handlers - Versioned sets of migration target handlers
> + * @v: Source version this applies to, host order
> + * @pre: Set of functions to execute in target before data copy
> + * @post: Set of functions to execute in target after data copy
> + */
> +struct migrate_target_handlers {
> + uint32_t v;
> + struct migrate_handler *pre;
> + struct migrate_handler *post;
> +};
> +
> +int migrate_source_pre(struct ctx *c, struct migrate_meta *m);
> +int migrate_source(int fd, const struct migrate_meta *m);
> +void migrate_source_post(struct ctx *c, struct migrate_meta *m);
> +
> +int migrate_target_read_header(int fd, struct migrate_meta *m);
> +int migrate_target_pre(struct ctx *c, struct migrate_meta *m);
> +int migrate_target(int fd, const struct migrate_meta *m);
> +void migrate_target_post(struct ctx *c, struct migrate_meta *m);
> +
> +#endif /* MIGRATE_H */
> diff --git a/passt.c b/passt.c
> index b1c8ab6..184d4e5 100644
> --- a/passt.c
> +++ b/passt.c
> @@ -358,7 +358,7 @@ loop:
> vu_kick_cb(c.vdev, ref, &now);
> break;
> case EPOLL_TYPE_VHOST_MIGRATION:
> - vu_migrate(c.vdev, eventmask);
> + vu_migrate(&c, eventmask);
Not really a comment on this patch, but do we actually need/want to
put the migration fd into the epoll loop? IIUC, everything we're
doing on the migration fd is synchronous and blocking, so we could run
the whole migration from the VHOST_USER_SET_DEVICE_STATE callback.
Or, maybe less confusing, flag the migration to run before we next
call epoll_wait(): having the migration run strictly in-between epoll
cycles seems like it might make some things easier to analyse.
> break;
> default:
> /* Can't happen */
> diff --git a/vu_common.c b/vu_common.c
> index f43d8ac..6c346c8 100644
> --- a/vu_common.c
> +++ b/vu_common.c
> @@ -5,6 +5,7 @@
> * common_vu.c - vhost-user common UDP and TCP functions
> */
>
> +#include <errno.h>
> #include <unistd.h>
> #include <sys/uio.h>
> #include <sys/eventfd.h>
> @@ -17,6 +18,7 @@
> #include "vhost_user.h"
> #include "pcap.h"
> #include "vu_common.h"
> +#include "migrate.h"
>
> #define VU_MAX_TX_BUFFER_NB 2
>
> @@ -305,50 +307,90 @@ err:
> }
>
> /**
> - * vu_migrate() - Send/receive passt insternal state to/from QEMU
> - * @vdev: vhost-user device
> + * vu_migrate_source() - Migration as source, send state to hypervisor
> + * @c: Execution context
> + * @fd: File descriptor for state transfer
> + *
> + * Return: 0 on success, positive error code on failure
> + */
> +static int vu_migrate_source(struct ctx *c, int fd)
> +{
> + struct migrate_meta m;
> + int rc;
> +
> + if ((rc = migrate_source_pre(c, &m))) {
> + err("Source pre-migration failed: %s, abort", strerror_(rc));
> + return rc;
> + }
> +
> + debug("Saving backend state");
> +
> + rc = migrate_source(fd, &m);
> + if (rc)
> + err("Source migration failed: %s", strerror_(rc));
> + else
> + migrate_source_post(c, &m);
> +
> + return rc;
> +}
> +
> +/**
> + * vu_migrate_target() - Migration as target, receive state from hypervisor
> + * @c: Execution context
> + * @fd: File descriptor for state transfer
> + *
> + * Return: 0 on success, positive error code on failure
> + */
> +static int vu_migrate_target(struct ctx *c, int fd)
> +{
> + struct migrate_meta m;
> + int rc;
> +
> + rc = migrate_target_read_header(fd, &m);
> + if (rc) {
> + err("Migration header check failed: %s, abort", strerror_(rc));
> + return rc;
> + }
> +
> + if ((rc = migrate_target_pre(c, &m))) {
> + err("Target pre-migration failed: %s, abort", strerror_(rc));
> + return rc;
> + }
> +
> + debug("Loading backend state");
> +
> + rc = migrate_target(fd, &m);
> + if (rc)
> + err("Target migration failed: %s", strerror_(rc));
> + else
> + migrate_target_post(c, &m);
> +
> + return rc;
> +}
> +
> +/**
> + * vu_migrate() - Send/receive passt internal state to/from QEMU
> + * @c: Execution context
> * @events: epoll events
> */
> -void vu_migrate(struct vu_dev *vdev, uint32_t events)
> +void vu_migrate(struct ctx *c, uint32_t events)
> {
> - int ret;
> + struct vu_dev *vdev = c->vdev;
> + int rc = EIO;
>
> - /* TODO: collect/set passt internal state
> - * and use vdev->device_state_fd to send/receive it
> - */
> debug("vu_migrate fd %d events %x", vdev->device_state_fd, events);
> - if (events & EPOLLOUT) {
> - debug("Saving backend state");
> -
> - /* send some stuff */
> - ret = write(vdev->device_state_fd, "PASST", 6);
> - /* value to be returned by VHOST_USER_CHECK_DEVICE_STATE */
> - vdev->device_state_result = ret == -1 ? -1 : 0;
> - /* Closing the file descriptor signals the end of transfer */
> - epoll_ctl(vdev->context->epollfd, EPOLL_CTL_DEL,
> - vdev->device_state_fd, NULL);
> - close(vdev->device_state_fd);
> - vdev->device_state_fd = -1;
> - } else if (events & EPOLLIN) {
> - char buf[6];
> -
> - debug("Loading backend state");
> - /* read some stuff */
> - ret = read(vdev->device_state_fd, buf, sizeof(buf));
> - /* value to be returned by VHOST_USER_CHECK_DEVICE_STATE */
> - if (ret != sizeof(buf)) {
> - vdev->device_state_result = -1;
> - } else {
> - ret = strncmp(buf, "PASST", sizeof(buf));
> - vdev->device_state_result = ret == 0 ? 0 : -1;
> - }
> - } else if (events & EPOLLHUP) {
> - debug("Closing migration channel");
> -
> - /* The end of file signals the end of the transfer. */
> - epoll_ctl(vdev->context->epollfd, EPOLL_CTL_DEL,
> - vdev->device_state_fd, NULL);
> - close(vdev->device_state_fd);
> - vdev->device_state_fd = -1;
> - }
> +
> + if (events & EPOLLOUT)
> + rc = vu_migrate_source(c, vdev->device_state_fd);
> + else if (events & EPOLLIN)
> + rc = vu_migrate_target(c, vdev->device_state_fd);
> +
> + /* EPOLLHUP without EPOLLIN/EPOLLOUT, or EPOLLERR? Migration failed */
> +
> + vdev->device_state_result = rc;
Again, not really a comment on this patch, but I think it would be
safer to set device_state_result to something non-zero (probably
EINPROGRESS) as soon as we get the VHOST_USER_SET_DEVICE_STATE_FD.
That way if somehow VHOST_USER_CHECK_DEVICE_STATE were called before
we actually do anything about the migration we'd correctly report that
it hasn't happened.
> +
> + epoll_ctl(c->epollfd, EPOLL_CTL_DEL, vdev->device_state_fd, NULL);
> + debug("Closing migration channel");
> + close(vdev->device_state_fd);
> + vdev->device_state_fd = -1;
> }
> diff --git a/vu_common.h b/vu_common.h
> index d56c021..69c4006 100644
> --- a/vu_common.h
> +++ b/vu_common.h
> @@ -57,5 +57,5 @@ void vu_flush(const struct vu_dev *vdev, struct vu_virtq *vq,
> void vu_kick_cb(struct vu_dev *vdev, union epoll_ref ref,
> const struct timespec *now);
> int vu_send_single(const struct ctx *c, const void *buf, size_t size);
> -void vu_migrate(struct vu_dev *vdev, uint32_t events);
> +void vu_migrate(struct ctx *c, uint32_t events);
> #endif /* VU_COMMON_H */
--
David Gibson (he or they) | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you, not the other way
| around.
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2025-01-29 6:15 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-28 23:39 [PATCH v2 0/8] Draft, incomplete series introducing state migration Stefano Brivio
2025-01-28 23:39 ` [PATCH v2 1/8] icmp, udp: Pad time_t timestamp to 64-bit to ease " Stefano Brivio
2025-01-29 1:34 ` David Gibson
2025-01-28 23:39 ` [PATCH v2 2/8] flow, flow_table: Pad flow table entries to 128 bytes, hash entries to 32 bits Stefano Brivio
2025-01-29 1:35 ` David Gibson
2025-01-28 23:39 ` [PATCH v2 3/8] flow_table: Use size in extern declaration for flowtab Stefano Brivio
2025-01-28 23:39 ` [PATCH v2 4/8] util: Add read_remainder() and read_all_buf() Stefano Brivio
2025-01-29 1:37 ` David Gibson
2025-01-28 23:39 ` [PATCH v2 5/8] Introduce facilities for guest migration on top of vhost-user infrastructure Stefano Brivio
2025-01-29 5:41 ` David Gibson [this message]
2025-01-29 8:46 ` Stefano Brivio
2025-01-30 1:28 ` David Gibson
2025-01-28 23:39 ` [PATCH v2 6/8] Introduce passt-repair Stefano Brivio
2025-01-28 23:39 ` [PATCH v2 7/8] Add interfaces and configuration bits for passt-repair Stefano Brivio
2025-01-29 6:09 ` David Gibson
2025-01-29 8:46 ` Stefano Brivio
2025-01-30 1:33 ` David Gibson
2025-01-28 23:39 ` [PATCH v2 8/8] flow, tcp: Basic pre-migration source handler to dump sequence numbers Stefano Brivio
2025-01-29 6:15 ` David Gibson
2025-01-29 8:46 ` Stefano Brivio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z5m_bd_059N9M-Vp@zatzit \
--to=david@gibson.dropbear.id.au \
--cc=lvivier@redhat.com \
--cc=passt-dev@passt.top \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).