From: David Gibson <david@gibson.dropbear.id.au>
To: Jon Maloy <jmaloy@redhat.com>
Cc: passt-dev@passt.top, sbrivio@redhat.com, lvivier@redhat.com,
dgibson@redhat.com
Subject: Re: [PATCH v8] tcp: move seq_to_tap update to when frame is queued
Date: Wed, 5 Jun 2024 09:59:19 +1000 [thread overview]
Message-ID: <Zl-qVz-ZuhZDzxSq@zatzit> (raw)
In-Reply-To: <20240604182908.1833186-1-jmaloy@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 7531 bytes --]
On Tue, Jun 04, 2024 at 02:29:08PM -0400, Jon Maloy wrote:
> commit a469fc393fa1 ("tcp, tap: Don't increase tap-side sequence counter for dropped frames")
> delayed update of conn->seq_to_tap until the moment the corresponding
> frame has been successfully pushed out. This has the advantage that we
> immediately can make a new attempt to transmit a frame after a failed
> trasnmit, rather than waiting for the peer to later discover a gap and
> trigger the fast retransmit mechanism to solve the problem.
>
> This approach has turned out to cause a problem with spurious sequence
> number updates during peer-initiated retransmits, and we have realized
> it may not be the best way to solve the above issue.
>
> We now restore the previous method, by updating the said field at the
> moment a frame is added to the outqueue. To retain the advantage of
> having a quick re-attempt based on local failure detection, we now scan
> through the part of the outqueue that had do be dropped, and restore the
> sequence counter for each affected connection to the most appropriate
> value.
>
> Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
>
> ---
> v2: - Re-spun loop in tcp_revert_seq() and some other changes based on
> feedback from Stefano Brivio.
> - Added paranoid test to avoid that seq_to_tap becomes lower than
> seq_ack_from_tap.
>
> v3: - Identical to v2. Called v3 because it was embedded in a series
> with that version.
>
> v4: - In tcp_revert_seq(), we read the sequence number from the TCP
> header instead of keeping a copy in struct tcp_buf_seq_update.
> - Since the only remaining field in struct tcp_buf_seq_update is
> a pointer to struct tcp_tap_conn, we eliminate the struct
> altogether, and make the tcp6/tcp3_buf_seq_update arrays into
> arrays of said pointer.
> - Removed 'paranoid' test in tcp_revert_seq. If it happens, it
> is not fatal, and will be caught by other code anyway.
> - Separated from the series again.
>
> v5: - Changed way to index array within tcp_revert_seq()
>
> v6-v7: No changes.
>
> v8: Fixed missing indexing of tcp4/6_frame_conns array in
> tcp_payload_flush().
> ---
> tcp.c | 61 ++++++++++++++++++++++++++++++++++++++---------------------
> 1 file changed, 39 insertions(+), 22 deletions(-)
>
> diff --git a/tcp.c b/tcp.c
> index 06acb41..89a5b19 100644
> --- a/tcp.c
> +++ b/tcp.c
> @@ -408,16 +408,6 @@ static int tcp_sock_ns [NUM_PORTS][IP_VERSIONS];
> */
> static union inany_addr low_rtt_dst[LOW_RTT_TABLE_SIZE];
>
> -/**
> - * tcp_buf_seq_update - Sequences to update with length of frames once sent
> - * @seq: Pointer to sequence number sent to tap-side, to be updated
> - * @len: TCP payload length
> - */
> -struct tcp_buf_seq_update {
> - uint32_t *seq;
> - uint16_t len;
> -};
> -
> /* Static buffers */
> /**
> * struct tcp_payload_t - TCP header and data to send segments with payload
> @@ -459,7 +449,8 @@ static struct tcp_payload_t tcp4_payload[TCP_FRAMES_MEM];
>
> static_assert(MSS4 <= sizeof(tcp4_payload[0].data), "MSS4 is greater than 65516");
>
> -static struct tcp_buf_seq_update tcp4_seq_update[TCP_FRAMES_MEM];
> +/* References tracking the owner connection of frames in the tap outqueue */
> +static struct tcp_tap_conn *tcp4_frame_conns[TCP_FRAMES_MEM];
> static unsigned int tcp4_payload_used;
>
> static struct tap_hdr tcp4_flags_tap_hdr[TCP_FRAMES_MEM];
> @@ -481,7 +472,8 @@ static struct tcp_payload_t tcp6_payload[TCP_FRAMES_MEM];
>
> static_assert(MSS6 <= sizeof(tcp6_payload[0].data), "MSS6 is greater than 65516");
>
> -static struct tcp_buf_seq_update tcp6_seq_update[TCP_FRAMES_MEM];
> +/* References tracking the owner connection of frames in the tap outqueue */
> +static struct tcp_tap_conn *tcp6_frame_conns[TCP_FRAMES_MEM];
> static unsigned int tcp6_payload_used;
>
> static struct tap_hdr tcp6_flags_tap_hdr[TCP_FRAMES_MEM];
> @@ -1257,25 +1249,51 @@ static void tcp_flags_flush(const struct ctx *c)
> tcp4_flags_used = 0;
> }
>
> +/**
> + * tcp_revert_seq() - Revert affected conn->seq_to_tap after failed transmission
> + * @conns: Array of connection pointers corresponding to queued frames
> + * @frames: Two-dimensional array containing queued frames with sub-iovs
> + * @num_frames: Number of entries in the two arrays to be compared
> + */
> +static void tcp_revert_seq(struct tcp_tap_conn **conns, struct iovec (*frames)[TCP_NUM_IOVS],
> + int num_frames)
> +{
> + int i;
> +
> + for (i = 0; i < num_frames; i++) {
> + struct tcp_tap_conn *conn = conns[i];
> + struct tcphdr *th = frames[i][TCP_IOV_PAYLOAD].iov_base;
> + uint32_t seq = ntohl(th->seq);
> +
> + if (SEQ_LE(conn->seq_to_tap, seq))
> + continue;
> +
> + conn->seq_to_tap = seq;
> + }
> +}
> +
> /**
> * tcp_payload_flush() - Send out buffers for segments with data
> * @c: Execution context
> */
> static void tcp_payload_flush(const struct ctx *c)
> {
> - unsigned i;
> size_t m;
>
> m = tap_send_frames(c, &tcp6_l2_iov[0][0], TCP_NUM_IOVS,
> tcp6_payload_used);
> - for (i = 0; i < m; i++)
> - *tcp6_seq_update[i].seq += tcp6_seq_update[i].len;
> + if (m != tcp6_payload_used) {
> + tcp_revert_seq(&tcp6_frame_conns[m], &tcp6_l2_iov[m],
> + tcp6_payload_used - m);
> + }
> tcp6_payload_used = 0;
>
> m = tap_send_frames(c, &tcp4_l2_iov[0][0], TCP_NUM_IOVS,
> tcp4_payload_used);
> - for (i = 0; i < m; i++)
> - *tcp4_seq_update[i].seq += tcp4_seq_update[i].len;
> + if (m != tcp4_payload_used) {
> + tcp_revert_seq(&tcp4_frame_conns[m], &tcp4_l2_iov[m],
> + tcp4_payload_used - m);
> + }
> tcp4_payload_used = 0;
> }
>
> @@ -2129,10 +2147,11 @@ static int tcp_sock_consume(const struct tcp_tap_conn *conn, uint32_t ack_seq)
> static void tcp_data_to_tap(const struct ctx *c, struct tcp_tap_conn *conn,
> ssize_t dlen, int no_csum, uint32_t seq)
> {
> - uint32_t *seq_update = &conn->seq_to_tap;
> struct iovec *iov;
> size_t l4len;
>
> + conn->seq_to_tap = seq + dlen;
> +
> if (CONN_V4(conn)) {
> struct iovec *iov_prev = tcp4_l2_iov[tcp4_payload_used - 1];
> const uint16_t *check = NULL;
> @@ -2142,8 +2161,7 @@ static void tcp_data_to_tap(const struct ctx *c, struct tcp_tap_conn *conn,
> check = &iph->check;
> }
>
> - tcp4_seq_update[tcp4_payload_used].seq = seq_update;
> - tcp4_seq_update[tcp4_payload_used].len = dlen;
> + tcp4_frame_conns[tcp4_payload_used] = conn;
>
> iov = tcp4_l2_iov[tcp4_payload_used++];
> l4len = tcp_l2_buf_fill_headers(c, conn, iov, dlen, check, seq);
> @@ -2151,8 +2169,7 @@ static void tcp_data_to_tap(const struct ctx *c, struct tcp_tap_conn *conn,
> if (tcp4_payload_used > TCP_FRAMES_MEM - 1)
> tcp_payload_flush(c);
> } else if (CONN_V6(conn)) {
> - tcp6_seq_update[tcp6_payload_used].seq = seq_update;
> - tcp6_seq_update[tcp6_payload_used].len = dlen;
> + tcp6_frame_conns[tcp6_payload_used] = conn;
>
> iov = tcp6_l2_iov[tcp6_payload_used++];
> l4len = tcp_l2_buf_fill_headers(c, conn, iov, dlen, NULL, seq);
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2024-06-05 0:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-04 18:29 [PATCH v8] tcp: move seq_to_tap update to when frame is queued Jon Maloy
2024-06-04 21:30 ` Stefano Brivio
2024-06-04 23:59 ` David Gibson
2024-06-05 9:53 ` Stefano Brivio
2024-06-05 16:21 ` Jon Maloy
2024-06-04 23:59 ` David Gibson [this message]
2024-06-05 19:58 ` Stefano Brivio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zl-qVz-ZuhZDzxSq@zatzit \
--to=david@gibson.dropbear.id.au \
--cc=dgibson@redhat.com \
--cc=jmaloy@redhat.com \
--cc=lvivier@redhat.com \
--cc=passt-dev@passt.top \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).