From: David Gibson <david@gibson.dropbear.id.au>
To: Stefano Brivio <sbrivio@redhat.com>
Cc: passt-dev@passt.top
Subject: Re: [PATCH] test: Speed up by cutting on eye candy and performance test duration
Date: Thu, 15 Aug 2024 13:43:58 +1000 [thread overview]
Message-ID: <Zr15fqegAnu8OPpB@zatzit.fritz.box> (raw)
In-Reply-To: <20240814225444.3708305-1-sbrivio@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 17592 bytes --]
On Thu, Aug 15, 2024 at 12:54:43AM +0200, Stefano Brivio wrote:
> We have a number of delays when we switch to new layouts that were
> added to make the tests visually easier to follow, together with
> blinking status bars. Shorten the delays and avoid blinking the
> status bar if $FAST is set to 1 (no demo mode).
>
> Shorten delays in busy loops to 10ms, instead of 100ms, and skip the
> one-second fixed delay when we wait for the status of a command.
>
> Cut the duration of throughput and latency tests to one second, down
> from ten. Somewhat surprisingly, the results we get are rather
> consistent, and not significantly different from what we'd get with
> 10 seconds.
>
> This, together with Podman's commit 20f3e8909e3a ("test/system:
> pasta_test_do add explicit port check"), cuts the time needed on my
> setup for full test run from approximately 37 minutes to...:
>
> $ time ./run
> [exited]
> PASS: 165, FAIL: 0
> Log at /home/sbrivio/passt/test/test_logs/test.log
>
> real 15m34.253s
> user 0m0.011s
> sys 0m0.011s
>
> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Marvelous!
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
> ---
> test/lib/layout | 14 +++++++-------
> test/lib/term | 31 +++++++++++++++----------------
> test/lib/test | 2 +-
> test/pasta_options/log_to_file | 4 ++--
> test/perf/passt_tcp | 18 +++++++++---------
> test/perf/passt_udp | 2 +-
> test/perf/pasta_tcp | 34 +++++++++++++++++-----------------
> test/perf/pasta_udp | 2 +-
> 8 files changed, 53 insertions(+), 54 deletions(-)
>
> diff --git a/test/lib/layout b/test/lib/layout
> index f9a1cf1..4d03572 100644
> --- a/test/lib/layout
> +++ b/test/lib/layout
> @@ -15,7 +15,7 @@
>
> # layout_pasta() - Panes for host, pasta, and separate one for namespace
> layout_pasta() {
> - sleep 3
> + sleep 1
>
> tmux kill-pane -a -t 0
> cmd_write 0 clear
> @@ -46,7 +46,7 @@ layout_pasta() {
>
> # layout_passt() - Panes for host, passt, and guest
> layout_passt() {
> - sleep 3
> + sleep 1
>
> tmux kill-pane -a -t 0
> cmd_write 0 clear
> @@ -77,7 +77,7 @@ layout_passt() {
>
> # layout_passt_in_pasta() - Host, passt within pasta, namespace and guest
> layout_passt_in_pasta() {
> - sleep 3
> + sleep 1
>
> tmux kill-pane -a -t 0
> cmd_write 0 clear
> @@ -113,7 +113,7 @@ layout_passt_in_pasta() {
>
> # layout_two_guests() - Two guest panes, two passt panes, plus host and log
> layout_two_guests() {
> - sleep 3
> + sleep 1
>
> tmux kill-pane -a -t 0
> cmd_write 0 clear
> @@ -152,7 +152,7 @@ layout_two_guests() {
>
> # layout_demo_pasta() - Four panes for pasta demo
> layout_demo_pasta() {
> - sleep 3
> + sleep 1
>
> cmd_write 0 cd ${BASEPATH}
> cmd_write 0 clear
> @@ -188,7 +188,7 @@ layout_demo_pasta() {
>
> # layout_demo_passt() - Four panes for passt demo
> layout_demo_passt() {
> - sleep 3
> + sleep 1
>
> cmd_write 0 cd ${BASEPATH}
> cmd_write 0 clear
> @@ -224,7 +224,7 @@ layout_demo_passt() {
>
> # layout_demo_podman() - Four panes for pasta demo with Podman
> layout_demo_podman() {
> - sleep 3
> + sleep 1
>
> cmd_write 0 cd ${BASEPATH}
> cmd_write 0 clear
> diff --git a/test/lib/term b/test/lib/term
> index 262937e..3834092 100755
> --- a/test/lib/term
> +++ b/test/lib/term
> @@ -97,7 +97,6 @@ display_delay() {
> switch_pane() {
> tmux select-pane -t ${1}
> PR_DELAY=${PR_DELAY_INIT}
> - display_delay "0.2"
> }
>
> # cmd_write() - Write a command to a pane, letter by letter, and execute it
> @@ -199,7 +198,7 @@ pane_run() {
> # $1: Pane name
> pane_wait() {
> __lc="$(echo "${1}" | tr [A-Z] [a-z])"
> - sleep 0.1 || sleep 1
> + sleep 0.01 || sleep 1
>
> __done=0
> while
> @@ -207,7 +206,7 @@ pane_wait() {
> case ${__l} in
> *"$ " | *"# ") return ;;
> esac
> - do sleep 0.1 || sleep 1; done
> + do sleep 0.01 || sleep 1; done
> }
>
> # pane_parse() - Print last line, @EMPTY@ if command had no output
> @@ -231,7 +230,7 @@ pane_status() {
>
> __status="$(pane_parse "${1}")"
> while ! [ "${__status}" -eq "${__status}" ] 2>/dev/null; do
> - sleep 1
> + sleep 0.01 || sleep 1
> pane_run "${1}" 'echo $?'
> pane_wait "${1}"
> __status="$(pane_parse "${1}")"
> @@ -383,6 +382,16 @@ info_check_failed() {
> printf " < failed.\n" >> "${LOGFILE}"
> }
>
> +# status_bar_blink() - Make status bar blink
> +status_bar_blink() {
> + for i in `seq 1 3`; do
> + tmux set status-right-style 'bg=colour1 fg=colour196 bold'
> + sleep 0.1 || sleep 1
> + tmux set status-right-style 'bg=colour1 fg=colour233 bold'
> + sleep 0.1 || sleep 1
> + done
> +}
> +
> # info_passed() - Display, log, and make status bar blink when a test passes
> info_passed() {
> switch_pane ${PANE_INFO}
> @@ -391,12 +400,7 @@ info_passed() {
> log "...passed."
> log
>
> - for i in `seq 1 3`; do
> - tmux set status-right-style 'bg=colour1 fg=colour2 bold'
> - sleep "0.1"
> - tmux set status-right-style 'bg=colour1 fg=colour233 bold'
> - sleep "0.1"
> - done
> + [ ${FAST} -eq 1 ] || status_bar_blink
> }
>
> # info_failed() - Display, log, and make status bar blink when a test passes
> @@ -407,12 +411,7 @@ info_failed() {
> log "...failed."
> log
>
> - for i in `seq 1 3`; do
> - tmux set status-right-style 'bg=colour1 fg=colour196 bold'
> - sleep "0.1"
> - tmux set status-right-style 'bg=colour1 fg=colour233 bold'
> - sleep "0.1"
> - done
> + [ ${FAST} -eq 1 ] || status_bar_blink
>
> pause_continue \
> "Press any key to pause test session" \
> diff --git a/test/lib/test b/test/lib/test
> index c525f8e..e6726be 100755
> --- a/test/lib/test
> +++ b/test/lib/test
> @@ -33,7 +33,7 @@ test_iperf3k() {
>
> pane_or_context_run "${__sctx}" 'kill -INT $(cat s.pid); rm s.pid'
>
> - sleep 3 # Wait for kernel to free up ports
> + sleep 1 # Wait for kernel to free up ports
> }
>
> # test_iperf3() - Ugly helper for iperf3 directive
> diff --git a/test/pasta_options/log_to_file b/test/pasta_options/log_to_file
> index fe50e50..3ead06c 100644
> --- a/test/pasta_options/log_to_file
> +++ b/test/pasta_options/log_to_file
> @@ -19,7 +19,7 @@ sleep 1
> endef
>
> def flood_log_client
> -host tcp_crr --nolog -P 10001 -C 10002 -6 -c -H ::1
> +host tcp_crr --nolog -l1 -P 10001 -C 10002 -6 -c -H ::1
> endef
>
> def check_log_size_mountns
> @@ -42,7 +42,7 @@ pout PID2 echo $!
> check head -1 __LOG_FILE__ | grep '^pasta .* [(]__PID2__[)]$'
>
> test Maximum log size
> -passtb ./pasta --config-net -d -f -l __LOG_FILE__ --log-size $((100 * 1024)) -- sh -c 'while true; do tcp_crr --nolog -P 10001 -C 10002 -6; done'
> +passtb ./pasta --config-net -d -f -l __LOG_FILE__ --log-size $((100 * 1024)) -- sh -c 'while true; do tcp_crr --nolog -l1 -P 10001 -C 10002 -6; done'
> sleep 1
>
> flood_log_client
> diff --git a/test/perf/passt_tcp b/test/perf/passt_tcp
> index 14343cb..695479f 100644
> --- a/test/perf/passt_tcp
> +++ b/test/perf/passt_tcp
> @@ -38,7 +38,7 @@ hout FREQ_CPUFREQ (echo "scale=1"; printf '( %i + 10^5 / 2 ) / 10^6\n' $(cat /sy
> hout FREQ [ -n "__FREQ_CPUFREQ__" ] && echo __FREQ_CPUFREQ__ || echo __FREQ_PROCFS__
>
> set THREADS 4
> -set TIME 10
> +set TIME 1
> set OMIT 0.1
> set OPTS -Z -P __THREADS__ -l 1M -O__OMIT__
>
> @@ -75,7 +75,7 @@ lat -
> lat -
> lat -
> nsb tcp_rr --nolog -6
> -gout LAT tcp_rr --nolog -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +gout LAT tcp_rr --nolog -l1 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
> lat __LAT__ 200 150
>
> tl TCP CRR latency over IPv6: guest to host
> @@ -85,7 +85,7 @@ lat -
> lat -
> lat -
> nsb tcp_crr --nolog -6
> -gout LAT tcp_crr --nolog -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +gout LAT tcp_crr --nolog -l1 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
> lat __LAT__ 500 400
>
> tr TCP throughput over IPv4: guest to host
> @@ -119,7 +119,7 @@ lat -
> lat -
> lat -
> nsb tcp_rr --nolog -4
> -gout LAT tcp_rr --nolog -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +gout LAT tcp_rr --nolog -l1 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
> lat __LAT__ 200 150
>
> tl TCP CRR latency over IPv4: guest to host
> @@ -129,7 +129,7 @@ lat -
> lat -
> lat -
> nsb tcp_crr --nolog -4
> -gout LAT tcp_crr --nolog -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +gout LAT tcp_crr --nolog -l1 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
> lat __LAT__ 500 400
>
> tr TCP throughput over IPv6: host to guest
> @@ -153,7 +153,7 @@ lat -
> lat -
> guestb tcp_rr --nolog -P 10001 -C 10011 -6
> sleep 1
> -nsout LAT tcp_rr --nolog -P 10001 -C 10011 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_rr --nolog -l1 -P 10001 -C 10011 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> lat __LAT__ 200 150
>
> tl TCP CRR latency over IPv6: host to guest
> @@ -164,7 +164,7 @@ lat -
> lat -
> guestb tcp_crr --nolog -P 10001 -C 10011 -6
> sleep 1
> -nsout LAT tcp_crr --nolog -P 10001 -C 10011 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_crr --nolog -l1 -P 10001 -C 10011 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> lat __LAT__ 500 350
>
>
> @@ -189,7 +189,7 @@ lat -
> lat -
> guestb tcp_rr --nolog -P 10001 -C 10011 -4
> sleep 1
> -nsout LAT tcp_rr --nolog -P 10001 -C 10011 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_rr --nolog -l1 -P 10001 -C 10011 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> lat __LAT__ 200 150
>
> tl TCP CRR latency over IPv6: host to guest
> @@ -200,7 +200,7 @@ lat -
> lat -
> guestb tcp_crr --nolog -P 10001 -C 10011 -4
> sleep 1
> -nsout LAT tcp_crr --nolog -P 10001 -C 10011 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_crr --nolog -l1 -P 10001 -C 10011 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> lat __LAT__ 500 300
>
> te
> diff --git a/test/perf/passt_udp b/test/perf/passt_udp
> index 8919280..f25c903 100644
> --- a/test/perf/passt_udp
> +++ b/test/perf/passt_udp
> @@ -31,7 +31,7 @@ hout FREQ_CPUFREQ (echo "scale=1"; printf '( %i + 10^5 / 2 ) / 10^6\n' $(cat /sy
> hout FREQ [ -n "__FREQ_CPUFREQ__" ] && echo __FREQ_CPUFREQ__ || echo __FREQ_PROCFS__
>
> set THREADS 2
> -set TIME 10
> +set TIME 1
> set OPTS -u -P __THREADS__ --pacing-timer 1000
>
> info Throughput in Gbps, latency in µs, __THREADS__ threads at __FREQ__ GHz
> diff --git a/test/perf/pasta_tcp b/test/perf/pasta_tcp
> index 8d2f911..a443f5a 100644
> --- a/test/perf/pasta_tcp
> +++ b/test/perf/pasta_tcp
> @@ -22,7 +22,7 @@ ns /sbin/sysctl -w net.ipv4.tcp_timestamps=0
>
>
> set THREADS 4
> -set TIME 10
> +set TIME 1
> set OMIT 0.1
> set OPTS -Z -w 4M -l 1M -P __THREADS__ -O__OMIT__
>
> @@ -46,13 +46,13 @@ iperf3k host
>
> tl TCP RR latency over IPv6: ns to host
> hostb tcp_rr --nolog -P 10003 -C 10013 -6
> -nsout LAT tcp_rr --nolog -P 10003 -C 10013 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> hostw
> lat __LAT__ 150 100
>
> tl TCP CRR latency over IPv6: ns to host
> hostb tcp_crr --nolog -P 10003 -C 10013 -6
> -nsout LAT tcp_crr --nolog -P 10003 -C 10013 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> hostw
> lat __LAT__ 500 350
>
> @@ -67,13 +67,13 @@ iperf3k host
>
> tl TCP RR latency over IPv4: ns to host
> hostb tcp_rr --nolog -P 10003 -C 10013 -4
> -nsout LAT tcp_rr --nolog -P 10003 -C 10013 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> hostw
> lat __LAT__ 150 100
>
> tl TCP CRR latency over IPv4: ns to host
> hostb tcp_crr --nolog -P 10003 -C 10013 -4
> -nsout LAT tcp_crr --nolog -P 10003 -C 10013 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> hostw
> lat __LAT__ 500 350
>
> @@ -87,13 +87,13 @@ iperf3k ns
>
> tl TCP RR latency over IPv6: host to ns
> nsb tcp_rr --nolog -P 10002 -C 10012 -6
> -hout LAT tcp_rr --nolog -P 10002 -C 10012 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +hout LAT tcp_rr --nolog -l1 -P 10002 -C 10012 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> nsw
> lat __LAT__ 150 100
>
> tl TCP CRR latency over IPv6: host to ns
> nsb tcp_crr --nolog -P 10002 -C 10012 -6
> -hout LAT tcp_crr --nolog -P 10002 -C 10012 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +hout LAT tcp_crr --nolog -l1 -P 10002 -C 10012 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
> nsw
> lat __LAT__ 1000 700
>
> @@ -108,13 +108,13 @@ iperf3k ns
>
> tl TCP RR latency over IPv4: host to ns
> nsb tcp_rr --nolog -P 10002 -C 10012 -4
> -hout LAT tcp_rr --nolog -P 10002 -C 10012 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +hout LAT tcp_rr --nolog -l1 -P 10002 -C 10012 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> nsw
> lat __LAT__ 150 100
>
> tl TCP CRR latency over IPv4: host to ns
> nsb tcp_crr --nolog -P 10002 -C 10012 -4
> -hout LAT tcp_crr --nolog -P 10002 -C 10012 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> +hout LAT tcp_crr --nolog -l1 -P 10002 -C 10012 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
> nsw
> lat __LAT__ 1000 700
>
> @@ -156,7 +156,7 @@ lat -
> lat -
> lat -
> hostb tcp_rr --nolog -P 10003 -C 10013 -6
> -nsout LAT tcp_rr --nolog -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
> hostw
> lat __LAT__ 150 100
>
> @@ -165,7 +165,7 @@ lat -
> lat -
> lat -
> hostb tcp_crr --nolog -P 10003 -C 10013 -6
> -nsout LAT tcp_crr --nolog -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -6 -c -H __GW6__%__IFNAME__ | sed -n 's/^throughput=\(.*\)/\1/p'
> hostw
> lat __LAT__ 1500 500
>
> @@ -193,7 +193,7 @@ lat -
> lat -
> lat -
> hostb tcp_rr --nolog -P 10003 -C 10013 -4
> -nsout LAT tcp_rr --nolog -P 10003 -C 10013 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_rr --nolog -l1 -P 10003 -C 10013 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
> hostw
> lat __LAT__ 150 100
>
> @@ -202,7 +202,7 @@ lat -
> lat -
> lat -
> hostb tcp_crr --nolog -P 10003 -C 10013 -4
> -nsout LAT tcp_crr --nolog -P 10003 -C 10013 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +nsout LAT tcp_crr --nolog -l1 -P 10003 -C 10013 -4 -c -H __GW__ | sed -n 's/^throughput=\(.*\)/\1/p'
> hostw
> lat __LAT__ 1500 500
>
> @@ -224,7 +224,7 @@ lat -
> lat -
> lat -
> nsb tcp_rr --nolog -P 10002 -C 10012 -6
> -hout LAT tcp_rr --nolog -P 10002 -C 10012 -6 -c -H __ADDR6__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +hout LAT tcp_rr --nolog -l1 -P 10002 -C 10012 -6 -c -H __ADDR6__ | sed -n 's/^throughput=\(.*\)/\1/p'
> nsw
> lat __LAT__ 150 100
>
> @@ -234,7 +234,7 @@ lat -
> lat -
> sleep 1
> nsb tcp_crr --nolog -P 10002 -C 10012 -6
> -hout LAT tcp_crr --nolog -P 10002 -C 10012 -6 -c -H __ADDR6__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +hout LAT tcp_crr --nolog -l1 -P 10002 -C 10012 -6 -c -H __ADDR6__ | sed -n 's/^throughput=\(.*\)/\1/p'
> nsw
> lat __LAT__ 5000 10000
>
> @@ -256,7 +256,7 @@ lat -
> lat -
> lat -
> nsb tcp_rr --nolog -P 10002 -C 10012 -4
> -hout LAT tcp_rr --nolog -P 10002 -C 10012 -4 -c -H __ADDR__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +hout LAT tcp_rr --nolog -l1 -P 10002 -C 10012 -4 -c -H __ADDR__ | sed -n 's/^throughput=\(.*\)/\1/p'
> nsw
> lat __LAT__ 150 100
>
> @@ -266,7 +266,7 @@ lat -
> lat -
> sleep 1
> nsb tcp_crr --nolog -P 10002 -C 10012 -4
> -hout LAT tcp_crr --nolog -P 10002 -C 10012 -4 -c -H __ADDR__ | sed -n 's/^throughput=\(.*\)/\1/p'
> +hout LAT tcp_crr --nolog -l1 -P 10002 -C 10012 -4 -c -H __ADDR__ | sed -n 's/^throughput=\(.*\)/\1/p'
> nsw
> lat __LAT__ 5000 10000
>
> diff --git a/test/perf/pasta_udp b/test/perf/pasta_udp
> index 6acbfd3..9fed62e 100644
> --- a/test/perf/pasta_udp
> +++ b/test/perf/pasta_udp
> @@ -21,7 +21,7 @@ hout FREQ_CPUFREQ (echo "scale=1"; printf '( %i + 10^5 / 2 ) / 10^6\n' $(cat /sy
> hout FREQ [ -n "__FREQ_CPUFREQ__" ] && echo __FREQ_CPUFREQ__ || echo __FREQ_PROCFS__
>
> set THREADS 1
> -set TIME 10
> +set TIME 1
> set OPTS -u -P __THREADS__
>
> info Throughput in Gbps, latency in µs, one thread at __FREQ__ GHz
--
David Gibson (he or they) | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you, not the other way
| around.
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2024-08-15 3:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-14 22:54 [PATCH] test: Speed up by cutting on eye candy and performance test duration Stefano Brivio
2024-08-15 3:43 ` David Gibson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zr15fqegAnu8OPpB@zatzit.fritz.box \
--to=david@gibson.dropbear.id.au \
--cc=passt-dev@passt.top \
--cc=sbrivio@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).