From: David Gibson <david@gibson.dropbear.id.au>
To: Yumei Huang <yuhuang@redhat.com>
Cc: passt-dev@passt.top, sbrivio@redhat.com
Subject: Re: [PATCH v10 3/5] tcp: Resend SYN for inbound connections
Date: Tue, 2 Dec 2025 14:19:26 +1100 [thread overview]
Message-ID: <aS5aviEVbqEPbswX@zatzit> (raw)
In-Reply-To: <20251202030007.23581-4-yuhuang@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 8032 bytes --]
On Tue, Dec 02, 2025 at 11:00:05AM +0800, Yumei Huang wrote:
> If a client connects while guest is not connected or ready yet,
> resend SYN instead of just resetting connection after 10 seconds.
>
> Use the same backoff calculation for the timeout as Linux kernel.
>
> Link: https://bugs.passt.top/show_bug.cgi?id=153
> Signed-off-by: Yumei Huang <yuhuang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
> ---
> tcp.c | 77 ++++++++++++++++++++++++++++++++++++++++++++++-------------
> tcp.h | 4 ++++
> 2 files changed, 65 insertions(+), 16 deletions(-)
>
> diff --git a/tcp.c b/tcp.c
> index 05f0d8b..27db5f8 100644
> --- a/tcp.c
> +++ b/tcp.c
> @@ -179,9 +179,11 @@
> *
> * Timeouts are implemented by means of timerfd timers, set based on flags:
> *
> - * - SYN_TIMEOUT: if no ACK is received from tap/guest during handshake (flag
> - * ACK_FROM_TAP_DUE without ESTABLISHED event) within this time, reset the
> - * connection
> + * - SYN_TIMEOUT_INIT: if no SYN,ACK is received from tap/guest during
> + * handshake (flag ACK_FROM_TAP_DUE without ESTABLISHED event) within
> + * this time, resend SYN. It's the starting timeout for the first SYN
> + * retry. Retry TCP_MAX_RETRIES or (syn_retries + syn_linear_timeouts)
> + * times, then reset the connection
> *
> * - ACK_TIMEOUT: if no ACK segment was received from tap/guest, after sending
> * data (flag ACK_FROM_TAP_DUE with ESTABLISHED event), re-send data from the
> @@ -340,7 +342,7 @@ enum {
> #define WINDOW_DEFAULT 14600 /* RFC 6928 */
>
> #define ACK_INTERVAL 10 /* ms */
> -#define SYN_TIMEOUT 10 /* s */
> +#define SYN_TIMEOUT_INIT 1 /* s, RFC 6928 */
> #define ACK_TIMEOUT 2
> #define FIN_TIMEOUT 60
> #define ACT_TIMEOUT 7200
> @@ -365,6 +367,13 @@ uint8_t tcp_migrate_rcv_queue [TCP_MIGRATE_RCV_QUEUE_MAX];
>
> #define TCP_MIGRATE_RESTORE_CHUNK_MIN 1024 /* Try smaller when above this */
>
> +#define SYN_RETRIES "/proc/sys/net/ipv4/tcp_syn_retries"
> +#define SYN_LINEAR_TIMEOUTS "/proc/sys/net/ipv4/tcp_syn_linear_timeouts"
> +
> +#define SYN_RETRIES_DEFAULT 6
> +#define SYN_LINEAR_TIMEOUTS_DEFAULT 4
> +#define MAX_SYNCNT 127 /* derived from kernel's limit */
> +
> /* "Extended" data (not stored in the flow table) for TCP flow migration */
> static struct tcp_tap_transfer_ext migrate_ext[FLOW_MAX];
>
> @@ -543,11 +552,12 @@ static int tcp_epoll_ctl(const struct ctx *c, struct tcp_tap_conn *conn)
>
> /**
> * tcp_timer_ctl() - Set timerfd based on flags/events, create timerfd if needed
> + * @c: Execution context
> * @conn: Connection pointer
> *
> * #syscalls timerfd_create timerfd_settime
> */
> -static void tcp_timer_ctl(struct tcp_tap_conn *conn)
> +static void tcp_timer_ctl(const struct ctx *c, struct tcp_tap_conn *conn)
> {
> struct itimerspec it = { { 0 }, { 0 } };
>
> @@ -584,10 +594,13 @@ static void tcp_timer_ctl(struct tcp_tap_conn *conn)
> if (conn->flags & ACK_TO_TAP_DUE) {
> it.it_value.tv_nsec = (long)ACK_INTERVAL * 1000 * 1000;
> } else if (conn->flags & ACK_FROM_TAP_DUE) {
> - if (!(conn->events & ESTABLISHED))
> - it.it_value.tv_sec = SYN_TIMEOUT;
> - else
> + if (!(conn->events & ESTABLISHED)) {
> + int exp;
> + exp = (int)conn->retries - c->tcp.syn_linear_timeouts;
> + it.it_value.tv_sec = SYN_TIMEOUT_INIT << MAX(exp, 0);
> + } else {
> it.it_value.tv_sec = ACK_TIMEOUT;
> + }
> } else if (CONN_HAS(conn, SOCK_FIN_SENT | TAP_FIN_ACKED)) {
> it.it_value.tv_sec = FIN_TIMEOUT;
> } else {
> @@ -631,7 +644,7 @@ void conn_flag_do(const struct ctx *c, struct tcp_tap_conn *conn,
> * flags and factor this into the logic below.
> */
> if (flag == ACK_FROM_TAP_DUE)
> - tcp_timer_ctl(conn);
> + tcp_timer_ctl(c, conn);
>
> return;
> }
> @@ -647,7 +660,7 @@ void conn_flag_do(const struct ctx *c, struct tcp_tap_conn *conn,
> if (flag == ACK_FROM_TAP_DUE || flag == ACK_TO_TAP_DUE ||
> (flag == ~ACK_FROM_TAP_DUE && (conn->flags & ACK_TO_TAP_DUE)) ||
> (flag == ~ACK_TO_TAP_DUE && (conn->flags & ACK_FROM_TAP_DUE)))
> - tcp_timer_ctl(conn);
> + tcp_timer_ctl(c, conn);
> }
>
> /**
> @@ -703,7 +716,7 @@ void conn_event_do(const struct ctx *c, struct tcp_tap_conn *conn,
> }
>
> if (CONN_HAS(conn, SOCK_FIN_SENT | TAP_FIN_ACKED))
> - tcp_timer_ctl(conn);
> + tcp_timer_ctl(c, conn);
> }
>
> /**
> @@ -1771,7 +1784,7 @@ static int tcp_data_from_tap(const struct ctx *c, struct tcp_tap_conn *conn,
> seq, conn->seq_from_tap);
>
> tcp_send_flag(c, conn, ACK);
> - tcp_timer_ctl(conn);
> + tcp_timer_ctl(c, conn);
>
> if (p->count == 1) {
> tcp_tap_window_update(c, conn,
> @@ -2422,11 +2435,21 @@ void tcp_timer_handler(const struct ctx *c, union epoll_ref ref)
>
> if (conn->flags & ACK_TO_TAP_DUE) {
> tcp_send_flag(c, conn, ACK_IF_NEEDED);
> - tcp_timer_ctl(conn);
> + tcp_timer_ctl(c, conn);
> } else if (conn->flags & ACK_FROM_TAP_DUE) {
> if (!(conn->events & ESTABLISHED)) {
> - flow_dbg(conn, "handshake timeout");
> - tcp_rst(c, conn);
> + int max;
> + max = c->tcp.syn_retries + c->tcp.syn_linear_timeouts;
> + max = MIN(TCP_MAX_RETRIES, max);
> + if (conn->retries >= max) {
> + flow_dbg(conn, "handshake timeout");
> + tcp_rst(c, conn);
> + } else {
> + flow_trace(conn, "SYN timeout, retry");
> + tcp_send_flag(c, conn, SYN);
> + conn->retries++;
> + tcp_timer_ctl(c, conn);
> + }
> } else if (CONN_HAS(conn, SOCK_FIN_SENT | TAP_FIN_ACKED)) {
> flow_dbg(conn, "FIN timeout");
> tcp_rst(c, conn);
> @@ -2444,7 +2467,7 @@ void tcp_timer_handler(const struct ctx *c, union epoll_ref ref)
> return;
>
> tcp_data_from_sock(c, conn);
> - tcp_timer_ctl(conn);
> + tcp_timer_ctl(c, conn);
> }
> } else {
> struct itimerspec new = { { 0 }, { ACT_TIMEOUT, 0 } };
> @@ -2782,6 +2805,26 @@ static socklen_t tcp_probe_tcp_info(void)
> return sl;
> }
>
> +/**
> + * tcp_get_rto_params() - Get host kernel RTO parameters
> + * @c: Execution context
> + */
> +static void tcp_get_rto_params(struct ctx *c)
> +{
> + intmax_t v;
> +
> + v = read_file_integer(SYN_RETRIES, SYN_RETRIES_DEFAULT);
> + c->tcp.syn_retries = MIN(v, MAX_SYNCNT);
> +
> + v = read_file_integer(SYN_LINEAR_TIMEOUTS, SYN_LINEAR_TIMEOUTS_DEFAULT);
> + c->tcp.syn_linear_timeouts = MIN(v, MAX_SYNCNT);
> +
> + debug("Using TCP RTO parameters, syn_retries: %"PRIu8
> + ", syn_linear_timeouts: %"PRIu8,
> + c->tcp.syn_retries,
> + c->tcp.syn_linear_timeouts);
> +}
> +
> /**
> * tcp_init() - Get initial sequence, hash secret, initialise per-socket data
> * @c: Execution context
> @@ -2792,6 +2835,8 @@ int tcp_init(struct ctx *c)
> {
> ASSERT(!c->no_tcp);
>
> + tcp_get_rto_params(c);
> +
> tcp_sock_iov_init(c);
>
> memset(init_sock_pool4, 0xff, sizeof(init_sock_pool4));
> diff --git a/tcp.h b/tcp.h
> index 0082386..37d7758 100644
> --- a/tcp.h
> +++ b/tcp.h
> @@ -60,12 +60,16 @@ union tcp_listen_epoll_ref {
> * @fwd_out: Port forwarding configuration for outbound packets
> * @timer_run: Timestamp of most recent timer run
> * @pipe_size: Size of pipes for spliced connections
> + * @syn_retries: SYN retries using exponential backoff timeout
> + * @syn_linear_timeouts: SYN retries before using exponential backoff timeout
> */
> struct tcp_ctx {
> struct fwd_ports fwd_in;
> struct fwd_ports fwd_out;
> struct timespec timer_run;
> size_t pipe_size;
> + uint8_t syn_retries;
> + uint8_t syn_linear_timeouts;
> };
>
> #endif /* TCP_H */
> --
> 2.51.1
>
--
David Gibson (he or they) | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you, not the other way
| around.
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2025-12-02 3:20 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-02 3:00 [PATCH v10 0/5] Retry SYNs " Yumei Huang
2025-12-02 3:00 ` [PATCH v10 1/5] tcp: Rename "retrans" to "retries" Yumei Huang
2025-12-02 3:00 ` [PATCH v10 2/5] util: Introduce read_file() and read_file_integer() function Yumei Huang
2025-12-02 3:07 ` David Gibson
2025-12-02 3:00 ` [PATCH v10 3/5] tcp: Resend SYN for inbound connections Yumei Huang
2025-12-02 3:19 ` David Gibson [this message]
2025-12-02 3:00 ` [PATCH v10 4/5] tcp: Update data retransmission timeout Yumei Huang
2025-12-02 3:00 ` [PATCH v10 5/5] tcp: Clamp the retry timeout Yumei Huang
2025-12-02 3:20 ` David Gibson
2025-12-03 6:33 ` [PATCH v10 0/5] Retry SYNs for inbound connections Stefano Brivio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aS5aviEVbqEPbswX@zatzit \
--to=david@gibson.dropbear.id.au \
--cc=passt-dev@passt.top \
--cc=sbrivio@redhat.com \
--cc=yuhuang@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://passt.top/passt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for IMAP folder(s).